Canadian Dollars
US Dollar
Euro
![Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does "Slip x Slip" mean?
This indicates that the fitting is unthreaded. You insert your 1/2" PVC pipe into both ends of the elbow, and they slide (or "slip") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/3957/5771/.5_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__29904.1766100021.jpg?c=2 "Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2\" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2\" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2\" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does \"Slip x Slip\" mean?
This indicates that the fitting is unthreaded. You insert your 1/2\" PVC pipe into both ends of the elbow, and they slide (or \"slip\") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2\" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]")
![Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does "Slip x Slip" mean?
This indicates that the fitting is unthreaded. You insert your 1/2" PVC pipe into both ends of the elbow, and they slide (or "slip") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/3957/5771/.5_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__29904.1766100021.jpg?c=2 "Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2\" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2\" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2\" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does \"Slip x Slip\" mean?
This indicates that the fitting is unthreaded. You insert your 1/2\" PVC pipe into both ends of the elbow, and they slide (or \"slip\") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2\" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]")
Product Description
Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does "Slip x Slip" mean?
This indicates that the fitting is unthreaded. You insert your 1/2" PVC pipe into both ends of the elbow, and they slide (or "slip") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]
![Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does "Slip x Slip" mean?
This indicates that the fitting is unthreaded. You insert your 1/2" PVC pipe into both ends of the elbow, and they slide (or "slip") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/3957/5771/.5_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__29904.1766100021.jpg?c=2 "Restore Your Hot Tub with Precision Parts
Don't let a leak ruin your relaxation time. Get high-quality 1/2\" 45-Degree PVC Elbows from Western Tub and Pool to fix your spa plumbing quickly and reliably.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Tricky Plumbing
When repairing a hot tub or spa, standard straight pipes often aren't enough. Our 1/2\" 45-Degree Elbows are essential for navigating tight spaces and creating smooth flow paths without the sharp resistance of a 90-degree turn. Whether you are replacing a cracked fitting or re-plumbing a jet line, these parts ensure your repair holds up against the heat and pressure.
Why Choose Our PVC Fittings?
Durability You Can Trust
Crafted from high-grade PVC, these fittings are chemically resistant and designed to withstand the harsh environment of hot tub water, ensuring a long-lasting repair.
Optimized Water Flow
The 45-degree angle provides a smoother transition for water or air than sharper bends, reducing friction loss and helping maintain strong jet pressure in your spa.
Standardized Sizing
These fittings feature a Slip x Slip connection, designed to fit perfectly over standard 1/2\" PVC pipe. They are the industry standard for spa and pool plumbing repairs.
Frequently Asked Questions
What does \"Slip x Slip\" mean?
This indicates that the fitting is unthreaded. You insert your 1/2\" PVC pipe into both ends of the elbow, and they slide (or \"slip\") inside the fitting socket to be glued in place.
How do I install these fittings?
You will need PVC primer and cement. Clean the pipe and the inside of the fitting, apply the primer to both surfaces, followed by the cement, and then push the pipe firmly into the fitting with a slight twist to ensure a secure, watertight bond.
Are these elbows Schedule 40?
Yes, these are standard Schedule 40 PVC fittings, which are commonly used in hot tub and pool plumbing applications due to their pressure rating and durability.
Can I use this for air lines as well as water?
Absolutely. These fittings are suitable for both water plumbing and air blower lines commonly found in jetted tubs and spas.
Get Your Spa Back in Action
Stop leaks and restore your peace of mind with the right parts for the job. Order your 1/2\" 45-Degree Elbows today.
[Buy Now at Western Tub and Pool]")
![Restore Your Spa with Premium 2-Inch 45-Degree Elbows
Don't let a leak ruin your relaxation. Western Tub and Pool supplies the durable, high-quality PVC fittings you need to get your hot tub back in action.
[Shop Now at Western Tub and Pool ]
The perfect fit for your plumbing repair
When your hot tub plumbing springs a leak or requires a reroute, you need parts that can handle the heat. Our 2-inch 45-degree elbows are essential for navigating tight spaces within your spa's equipment bay without restricting water flow.
Precision Engineering
Stop leaks before they start. Our fittings are manufactured to strict tolerances, ensuring a snug, watertight bond with your existing 2-inch PVC pipe.
Built for Spa Environments
Standard hardware store parts often fail under pressure. Our PVC fittings are specifically designed to withstand the unique chemical balance and high temperatures of hot tub water.
Smooth Flow Design
The 45-degree angle provides a smoother transition for water flow compared to sharp 90-degree turns, reducing strain on your pump and increasing energy efficiency.
Simple steps to a fixed spa
1. Measure your pipe
Ensure you are working with 2-inch pipe. Remember, PVC size is based on the interior diameter of the pipe, not the exterior.
2. Order your parts
Select the exact quantity of 45-degree elbows you need from Western Tub and Pool for quick shipping.
3. Install and relax
Using standard PVC primer and cement, install your new fittings and get ready to enjoy your soak.
Frequently asked questions
How do I know if I need a 2-inch fitting?
PVC sizing can be confusing because it is named after the ID (Inside Diameter) of the pipe, not the OD (Outside Diameter). If you measure the outside of your pipe and it is approximately 2-3/8 inches, you need a 2-inch fitting.
Can I use these elbows for pool plumbing as well?
Absolutely. These high-grade PVC fittings are suitable for both pool and spa applications, offering the durability needed for pressurized water systems.
Do I need special glue for these fittings?
You should use a high-quality PVC primer and solvent cement (glue) intended for pressure applications. This ensures the chemical bond is strong enough to handle the water pressure of your spa jets.
What is the advantage of a 45-degree elbow over a 90-degree elbow?
A 45-degree elbow creates less friction and resistance than a 90-degree turn. This helps maintain better water pressure at your jets and puts less stress on your circulation pump.
Get your hot tub running today
Stop waiting and start soaking. Order your replacement 2-inch 45-degree elbows from Western Tub and Pool now.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/3953/5767/2_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__48481.1765922727.jpg?c=2 "Restore Your Spa with Premium 2-Inch 45-Degree Elbows
Don't let a leak ruin your relaxation. Western Tub and Pool supplies the durable, high-quality PVC fittings you need to get your hot tub back in action.
[Shop Now at Western Tub and Pool ]
The perfect fit for your plumbing repair
When your hot tub plumbing springs a leak or requires a reroute, you need parts that can handle the heat. Our 2-inch 45-degree elbows are essential for navigating tight spaces within your spa's equipment bay without restricting water flow.
Precision Engineering
Stop leaks before they start. Our fittings are manufactured to strict tolerances, ensuring a snug, watertight bond with your existing 2-inch PVC pipe.
Built for Spa Environments
Standard hardware store parts often fail under pressure. Our PVC fittings are specifically designed to withstand the unique chemical balance and high temperatures of hot tub water.
Smooth Flow Design
The 45-degree angle provides a smoother transition for water flow compared to sharp 90-degree turns, reducing strain on your pump and increasing energy efficiency.
Simple steps to a fixed spa
1. Measure your pipe
Ensure you are working with 2-inch pipe. Remember, PVC size is based on the interior diameter of the pipe, not the exterior.
2. Order your parts
Select the exact quantity of 45-degree elbows you need from Western Tub and Pool for quick shipping.
3. Install and relax
Using standard PVC primer and cement, install your new fittings and get ready to enjoy your soak.
Frequently asked questions
How do I know if I need a 2-inch fitting?
PVC sizing can be confusing because it is named after the ID (Inside Diameter) of the pipe, not the OD (Outside Diameter). If you measure the outside of your pipe and it is approximately 2-3/8 inches, you need a 2-inch fitting.
Can I use these elbows for pool plumbing as well?
Absolutely. These high-grade PVC fittings are suitable for both pool and spa applications, offering the durability needed for pressurized water systems.
Do I need special glue for these fittings?
You should use a high-quality PVC primer and solvent cement (glue) intended for pressure applications. This ensures the chemical bond is strong enough to handle the water pressure of your spa jets.
What is the advantage of a 45-degree elbow over a 90-degree elbow?
A 45-degree elbow creates less friction and resistance than a 90-degree turn. This helps maintain better water pressure at your jets and puts less stress on your circulation pump.
Get your hot tub running today
Stop waiting and start soaking. Order your replacement 2-inch 45-degree elbows from Western Tub and Pool now.
[Buy Now at Western Tub and Pool]")
![Restore Your Hot Tub with Precision PVC Parts
Don't let a cracked fitting ruin your relaxation. Get the high-quality 2 1/2" 45 Degree Elbow PVC fittings you need to fix your spa fast and get back to soaking.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Your Spa Repair
Finding the exact replacement part for your hot tub can be a headache, but Western Tub and Pool makes it simple. Our 2 1/2" 45 Degree Elbows are designed for seamless compatibility and long-lasting durability, ensuring your spa operates at peak performance.
Why Choose Western Tub and Pool?
Professional Grade Durability
Our PVC fittings are built to withstand the high pressure and chemical environment of hot tubs and spas, resisting corrosion and wear over time.
Exact Specifications
Stop guessing at the hardware store. Our 2 1/2" 45 Degree Elbows are precision-engineered to fit standard spa plumbing, ensuring a leak-free seal every time.
Easy Installation
Designed for DIYers and professionals alike, our fittings allow for a smooth glue-up process so you can complete your repair quickly and efficiently.
Frequently Asked Questions
How do I know if this is the right size for my spa?
PVC pipe size is measured by the inside diameter of the pipe, not the outside. If your existing pipe measures roughly 2 7/8" on the outside, a 2 1/2" fitting is likely the correct size.
Can I use standard PVC glue for these fittings?
Yes, standard PVC cement and primer work perfectly with our fittings. However, for hot tubs, we recommend using a heavy-bodied glue designed for pressure applications to ensure a secure bond.
Are these fittings Schedule 40 or Schedule 80?
Our spa parts are typically Schedule 40, which is the industry standard for hot tub plumbing pressure ratings.
Do you offer fast shipping?
We understand you want your hot tub back up and running. We process orders quickly to get your parts to your door as soon as possible.
Get Your Spa Back Up and Running
Don't wait until a small leak becomes a big problem. Order your high-quality replacement parts today.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/3952/5766/2.5_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__77817.1765921913.jpg?c=2 "Restore Your Hot Tub with Precision PVC Parts
Don't let a cracked fitting ruin your relaxation. Get the high-quality 2 1/2\" 45 Degree Elbow PVC fittings you need to fix your spa fast and get back to soaking.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Your Spa Repair
Finding the exact replacement part for your hot tub can be a headache, but Western Tub and Pool makes it simple. Our 2 1/2\" 45 Degree Elbows are designed for seamless compatibility and long-lasting durability, ensuring your spa operates at peak performance.
Why Choose Western Tub and Pool?
Professional Grade Durability
Our PVC fittings are built to withstand the high pressure and chemical environment of hot tubs and spas, resisting corrosion and wear over time.
Exact Specifications
Stop guessing at the hardware store. Our 2 1/2\" 45 Degree Elbows are precision-engineered to fit standard spa plumbing, ensuring a leak-free seal every time.
Easy Installation
Designed for DIYers and professionals alike, our fittings allow for a smooth glue-up process so you can complete your repair quickly and efficiently.
Frequently Asked Questions
How do I know if this is the right size for my spa?
PVC pipe size is measured by the inside diameter of the pipe, not the outside. If your existing pipe measures roughly 2 7/8\" on the outside, a 2 1/2\" fitting is likely the correct size.
Can I use standard PVC glue for these fittings?
Yes, standard PVC cement and primer work perfectly with our fittings. However, for hot tubs, we recommend using a heavy-bodied glue designed for pressure applications to ensure a secure bond.
Are these fittings Schedule 40 or Schedule 80?
Our spa parts are typically Schedule 40, which is the industry standard for hot tub plumbing pressure ratings.
Do you offer fast shipping?
We understand you want your hot tub back up and running. We process orders quickly to get your parts to your door as soon as possible.
Get Your Spa Back Up and Running
Don't wait until a small leak becomes a big problem. Order your high-quality replacement parts today.
[Buy Now at Western Tub and Pool]")
![Stop Leaks Fast with Premium 1 1/2" PVC Elbows
Don't let a cracked fitting ruin your relaxation. Get durable, precise-fit 1 1/2" 45-degree elbows designed specifically for hot tub and spa repairs.
[Shop Now at Western Tub and Pool]
The perfect fit for your spa repair
When your hot tub plumbing fails, you need a replacement part that installs easily and lasts. Western Tub and Pool provides high-quality PVC fittings that professionals trust.
Precision Engineering
Our 1 1/2" 45-degree elbows are manufactured to exact specifications, ensuring a tight, leak-free seal for your spa or pool plumbing system.
Built to Last
Hot tubs expose pipes to high heat and harsh chemicals. Our PVC fittings are crafted from heavy-duty materials designed to withstand these extreme conditions without cracking or warping.
Ideal for Tight Spaces
The 45-degree angle allows for smoother flow and easier routing in the cramped equipment bays of hot tubs, reducing water resistance compared to sharp 90-degree turns.
Simple installation process
1. Measure your pipe
Confirm you are using 1 1/2" PVC pipe. Remember, the measurement is based on the inside diameter of the pipe, not the outside.
2. Prep the area
Clean the pipe and the inside of the new 45-degree elbow thoroughly to ensure the solvent welds correctly.
3. Glue and set
Apply your PVC primer and cement, insert the pipe into the fitting, and give it a quarter turn to lock in a secure bond.
Frequently asked questions
How do I know if this is the right size for my hot tub?
PVC sizing can be confusing. A 1 1/2" fitting is designed to fit a pipe with an inside diameter of approximately 1 1/2". If you measure the outside of your pipe, it should measure roughly 1.900".
Can I use these fittings for a swimming pool?
Yes, these 1 1/2" 45-degree elbows are suitable for both hot tub and swimming pool applications, provided the plumbing size matches.
Do I need special glue for installation?
Yes, you should use a primer and PVC cement specifically designed for pressure applications to ensure a permanent, watertight bond.
Get your hot tub running again
Don't wait for a small leak to become a big problem. Order your replacement fittings today and get back to soaking in comfort.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/3954/5768/1.5_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__71981.1766096420.jpg?c=2 "Stop Leaks Fast with Premium 1 1/2\" PVC Elbows
Don't let a cracked fitting ruin your relaxation. Get durable, precise-fit 1 1/2\" 45-degree elbows designed specifically for hot tub and spa repairs.
[Shop Now at Western Tub and Pool]
The perfect fit for your spa repair
When your hot tub plumbing fails, you need a replacement part that installs easily and lasts. Western Tub and Pool provides high-quality PVC fittings that professionals trust.
Precision Engineering
Our 1 1/2\" 45-degree elbows are manufactured to exact specifications, ensuring a tight, leak-free seal for your spa or pool plumbing system.
Built to Last
Hot tubs expose pipes to high heat and harsh chemicals. Our PVC fittings are crafted from heavy-duty materials designed to withstand these extreme conditions without cracking or warping.
Ideal for Tight Spaces
The 45-degree angle allows for smoother flow and easier routing in the cramped equipment bays of hot tubs, reducing water resistance compared to sharp 90-degree turns.
Simple installation process
1. Measure your pipe
Confirm you are using 1 1/2\" PVC pipe. Remember, the measurement is based on the inside diameter of the pipe, not the outside.
2. Prep the area
Clean the pipe and the inside of the new 45-degree elbow thoroughly to ensure the solvent welds correctly.
3. Glue and set
Apply your PVC primer and cement, insert the pipe into the fitting, and give it a quarter turn to lock in a secure bond.
Frequently asked questions
How do I know if this is the right size for my hot tub?
PVC sizing can be confusing. A 1 1/2\" fitting is designed to fit a pipe with an inside diameter of approximately 1 1/2\". If you measure the outside of your pipe, it should measure roughly 1.900\".
Can I use these fittings for a swimming pool?
Yes, these 1 1/2\" 45-degree elbows are suitable for both hot tub and swimming pool applications, provided the plumbing size matches.
Do I need special glue for installation?
Yes, you should use a primer and PVC cement specifically designed for pressure applications to ensure a permanent, watertight bond.
Get your hot tub running again
Don't wait for a small leak to become a big problem. Order your replacement fittings today and get back to soaking in comfort.
[Buy Now at Western Tub and Pool]")
![Fix Your Hot Tub Leak with Precision PVC Fittings
Don't let a cracked pipe ruin your relaxation. Get durable 1" 45-degree elbows and high-quality replacement parts from Western Tub and Pool to restore your spa today.
[Shop Replacement Parts at Western Tub and Pool]
Reliable repairs for your spa
When your hot tub plumbing needs a fix, you need parts that fit perfectly and last longer. Western Tub and Pool provides professional-grade PVC fittings designed to withstand the harsh environment of your spa.
The perfect angle
Our 1" 45-degree elbows allow for smoother water flow and easier pipe routing compared to standard 90-degree turns, reducing friction and pressure on your system.
Built to last
Crafted from high-quality PVC, these fittings are engineered to resist the high temperatures and chemical exposure found in hot tubs, ensuring your repair holds up over time.
Easy installation
Designed for standard spa plumbing, these replacement parts make DIY repairs straightforward, helping you get your hot tub back in action without the need for expensive service calls.
Frequently asked questions
How do I know if I need a 1" fitting?
PVC pipe size is determined by the inside diameter of the pipe, not the outside. If you are unsure, check the printing on your existing pipe or measure the inner bore of the pipe you are connecting to.
Can I use these fittings for both hot tubs and pools?
Yes, our 1" 45-degree elbows are suitable for both hot tub and pool plumbing applications where standard PVC sizing is used.
Do I need special glue for installation?
Yes, to ensure a watertight seal, you should use a primer and PVC cement specifically designed for plumbing applications.
Why use a 45-degree elbow instead of a 90-degree elbow?
A 45-degree elbow provides a more gradual turn in the plumbing. This improves water flow efficiency and puts less strain on the pump compared to a sharp 90-degree turn.
Get your spa bubbling again
Stop the leaks and start relaxing. Order your 1" 45-degree elbows and PVC fittings today.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/3955/5769/1_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__43781.1766097289.jpg?c=2 "Fix Your Hot Tub Leak with Precision PVC Fittings
Don't let a cracked pipe ruin your relaxation. Get durable 1\" 45-degree elbows and high-quality replacement parts from Western Tub and Pool to restore your spa today.
[Shop Replacement Parts at Western Tub and Pool]
Reliable repairs for your spa
When your hot tub plumbing needs a fix, you need parts that fit perfectly and last longer. Western Tub and Pool provides professional-grade PVC fittings designed to withstand the harsh environment of your spa.
The perfect angle
Our 1\" 45-degree elbows allow for smoother water flow and easier pipe routing compared to standard 90-degree turns, reducing friction and pressure on your system.
Built to last
Crafted from high-quality PVC, these fittings are engineered to resist the high temperatures and chemical exposure found in hot tubs, ensuring your repair holds up over time.
Easy installation
Designed for standard spa plumbing, these replacement parts make DIY repairs straightforward, helping you get your hot tub back in action without the need for expensive service calls.
Frequently asked questions
How do I know if I need a 1\" fitting?
PVC pipe size is determined by the inside diameter of the pipe, not the outside. If you are unsure, check the printing on your existing pipe or measure the inner bore of the pipe you are connecting to.
Can I use these fittings for both hot tubs and pools?
Yes, our 1\" 45-degree elbows are suitable for both hot tub and pool plumbing applications where standard PVC sizing is used.
Do I need special glue for installation?
Yes, to ensure a watertight seal, you should use a primer and PVC cement specifically designed for plumbing applications.
Why use a 45-degree elbow instead of a 90-degree elbow?
A 45-degree elbow provides a more gradual turn in the plumbing. This improves water flow efficiency and puts less strain on the pump compared to a sharp 90-degree turn.
Get your spa bubbling again
Stop the leaks and start relaxing. Order your 1\" 45-degree elbows and PVC fittings today.
[Buy Now at Western Tub and Pool]")
![Fix Your Hot Tub Leaks Fast
Don't let a broken pipe ruin your relaxation. Get durable 3/4" 45 Degree Elbow PVC fittings from Western Tub and Pool and get your spa back in action.
[Shop Now at Western Tub and Pool]
Precision Fittings for Reliable Repairs
When your hot tub plumbing needs a fix, you need parts you can trust. Our schedule 40 PVC 45-degree elbows are designed specifically for spa and pool applications, ensuring a tight seal and long-lasting performance.
Why Choose Our PVC Fittings?
Perfect Fit Every Time
Designed with a 3/4" slip x slip connection, these elbows provide a seamless fit for standard spa plumbing, making repairs straightforward and hassle-free.
Built to Last
Crafted from high-quality PVC, these fittings are resistant to chemical corrosion and temperature fluctuations, ensuring your repair holds up season after season.
Professional Grade
Whether you are a DIY enthusiast or a professional repair technician, our fittings meet the rigorous standards required for hot tub and pool circulation systems.
Frequently Asked Questions
What specific size pipe do these fit?
These elbows are designed for 3/4" PVC pipe. Note that PVC sizing is based on the inner diameter of the pipe, not the outer diameter. If you are unsure, check the printing on your existing pipe.
Do I need a specific glue for these?
Yes, for a secure, watertight bond, you should use a primer and PVC cement specifically designed for pool and spa applications.
Are these suitable for hot water applications?
Absolutely. These schedule 40 PVC fittings are rated for pressure applications and are standard for hot tub and spa plumbing systems.
Can I use these for other plumbing projects?
While they are specialized for spas and pools, 3/4" schedule 40 PVC fittings can be used in irrigation and general residential plumbing where applicable.
Get Your Spa Running Smoothly Again
Stop leaks and restore your hot tub's flow with high-quality replacement parts from Western Tub and Pool.
[Buy Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/3956/5770/0.75_inch_45_degree_slip_elbow_pvc_fittings_at_Western_Tub_and_Pool__36995.1766097862.jpg?c=2 "Fix Your Hot Tub Leaks Fast
Don't let a broken pipe ruin your relaxation. Get durable 3/4\" 45 Degree Elbow PVC fittings from Western Tub and Pool and get your spa back in action.
[Shop Now at Western Tub and Pool]
Precision Fittings for Reliable Repairs
When your hot tub plumbing needs a fix, you need parts you can trust. Our schedule 40 PVC 45-degree elbows are designed specifically for spa and pool applications, ensuring a tight seal and long-lasting performance.
Why Choose Our PVC Fittings?
Perfect Fit Every Time
Designed with a 3/4\" slip x slip connection, these elbows provide a seamless fit for standard spa plumbing, making repairs straightforward and hassle-free.
Built to Last
Crafted from high-quality PVC, these fittings are resistant to chemical corrosion and temperature fluctuations, ensuring your repair holds up season after season.
Professional Grade
Whether you are a DIY enthusiast or a professional repair technician, our fittings meet the rigorous standards required for hot tub and pool circulation systems.
Frequently Asked Questions
What specific size pipe do these fit?
These elbows are designed for 3/4\" PVC pipe. Note that PVC sizing is based on the inner diameter of the pipe, not the outer diameter. If you are unsure, check the printing on your existing pipe.
Do I need a specific glue for these?
Yes, for a secure, watertight bond, you should use a primer and PVC cement specifically designed for pool and spa applications.
Are these suitable for hot water applications?
Absolutely. These schedule 40 PVC fittings are rated for pressure applications and are standard for hot tub and spa plumbing systems.
Can I use these for other plumbing projects?
While they are specialized for spas and pools, 3/4\" schedule 40 PVC fittings can be used in irrigation and general residential plumbing where applicable.
Get Your Spa Running Smoothly Again
Stop leaks and restore your hot tub's flow with high-quality replacement parts from Western Tub and Pool.
[Buy Now at Western Tub and Pool]")