Canadian Dollars
US Dollar
Euro
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4546/6824/MAAX_retrofit__82545.1789149385.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4546/6825/MAAX_retrofit-1__28440.1789149387.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4546/6826/MAAX_retrofit-2__38809.1789149391.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4546/6824/MAAX_retrofit__82545.1789149385.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4546/6825/MAAX_retrofit-1__28440.1789149387.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4546/6826/MAAX_retrofit-2__38809.1789149391.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
Product Description
Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
- 109320 MXBP20 800INC spa control pack with 5.5kW heater
- 111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
- Overlay (111517) matched to your button configuration
- 2 heater unions with gaskets for a clean, leak-free install
- Support for up to 3 pumps, a blower, and a 24-hour circulation pump
- BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
- 2003 Coleman Spas 600 Series
- 2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
- Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
- 103742 – older Maax Coleman control system
- 101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
- 109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
- 110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
- 59303 – Balboa WiFi module (add wireless spa control)
- 101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
- 110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
- 110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
|
Detail |
Info |
|---|---|
|
Part / SKU |
110339 |
|
Control pack |
MXBP20 800INC |
|
Heater |
5.5kW |
|
Control panel |
TP700, 9-button |
|
Pump support |
Up to 3 pumps |
|
Additional support |
Blower, 24-hour circ pump |
|
Connectivity |
BBA-ready; WiFi optional (module 59303) |
|
Shipping |
Free shipping included |
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
- U – USA
- C – Canada
- E – Europe
- A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]
![Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4546/6824/MAAX_retrofit__82545.1789149385.PNG?c=2 "Maax Coleman MXBP20 Control System Retrofit Kit T8 (110339)
Restore full power and precision control to your Maax or Coleman spa with the MXBP20 Retrofit Kit T8, a complete, genuine control system upgrade built for reliability. If your old spa pack is failing, discontinued, or simply outdated, this kit gives you a modern, factory-direct replacement without the hassle of tracking down obsolete parts one by one.
[Shop and order at Western Tub and Pool]
What's in the box
109320 MXBP20 800INC spa control pack with 5.5kW heater
111515 9-button TP700 control panel (the modern replacement for the discontinued TP800)
Overlay (111517) matched to your button configuration
2 heater unions with gaskets for a clean, leak-free install
Support for up to 3 pumps, a blower, and a 24-hour circulation pump
BBA-ready circuit board, with the option to add WiFi via module 59303 (sold separately)
This is a genuine, original manufacturer kit — not an aftermarket substitute — so you get the fit, function, and durability your spa was designed for.
Why spa owners choose this kit
One retrofit, total compatibility. Whether your original system used a TP800 or an older control panel entirely, this kit bridges the gap with the current TP700 topside.
Built for heavy-duty use. With support for three pumps, a blower, and a dedicated circ pump, it's suited to spas with higher equipment demands.
Future-proofed. BBA capability means you can add WiFi control down the line without replacing the whole system again.
No guesswork. Free shipping and clear part cross-references take the confusion out of hot tub repair.
Compatible hot tub models
This retrofit kit (and its parts) is a factory-approved replacement for:
2003 Coleman Spas 600 Series
2001–2005 Coleman Spas 700 Series, including models 704, 705, and 706
Older Maax Spas and California Cooperage Spas using compatible obsolete control systems
Not sure if your spa falls outside this range? Coleman and Maax spas from the 100, 300, 400, and 500 Series may use related control systems — check your part number below or contact us to confirm.
Cross-reference & related part numbers
This kit replaces or upgrades the following discontinued or obsolete parts:
103742 – older Maax Coleman control system
101212 – Coleman Spas Topside Panel, 3 Pumps, 705, 706, 2003 Coleman 406
109244 – Maax Coleman spa control panel (discontinued; now replaced by TP700)
Related parts you may also need
110574 – Topside adapter bezel, for larger panel cutouts from your original control panel
59303 – Balboa WiFi module (add wireless spa control)
101279 – 2-speed pump cord, 115/230V, 120\", with AMP connector
110719 – MXBP20 replacement circuit board (sold separately, if only the board is needed)
110239 – Nearly identical kit for spas without a dedicated 24-hour circ pump (uses main pump 1 for circulation instead)
Specifications
Detail
Info
Part / SKU
110339
Control pack
MXBP20 800INC
Heater
5.5kW
Control panel
TP700, 9-button
Pump support
Up to 3 pumps
Additional support
Blower, 24-hour circ pump
Connectivity
BBA-ready; WiFi optional (module 59303)
Shipping
Free shipping included
Exact dimensions and shipping weight vary slightly by warehouse region — contact us for precise figures ahead of installation planning.
Frequently asked questions
Is this a genuine manufacturer part?
Yes. The MXBP20 Retrofit Kit T8 is a genuine, original replacement kit, not a generic aftermarket clone.
My spa originally came with a TP800 panel. Will this kit still fit?
Yes. The TP800 has been discontinued and replaced industry-wide by the TP700. This kit includes the TP700 with a matching overlay, and a bezel (110574) is available separately if your original panel cutout is larger than the new one requires.
How many pumps and accessories can this system run?
Up to three pumps, a blower, and a dedicated 24-hour circulation pump. If your spa doesn't have a separate circ pump and instead relies on pump 1 for circulation, kit 110239 may be the better fit.
Can I add WiFi control to this system?
Yes. The control pack is BBA-ready, so you can add the optional 59303 WiFi module now or later.
What if I can't find my exact part number?
Send us a photo of your existing control pack, panel, or spa data plate, along with your spa's make, model, and serial number, and we'll confirm the correct match.
Hard-to-find part? We'll track it down.
Some spa parts are tough to source, especially on older or discontinued models. If you can't find what you need in our catalog, send us an email at fixmytub@gmail.com and our team will help identify and locate it for you.
A note for international customers: As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses. To reflect origin and manage shipping accurately, we use the following suffixes on applicable part numbers:
U – USA
C – Canada
E – Europe
A – Asia
Some parts may be available from more than one region under a different suffix. If you know your part number, check it against these suffixes before ordering. If you're unsure, send us pictures along with your hot tub's make, model, and serial number, and we'll match you to the correct part every time.
Ready to get your spa back up and running?
Skip the guesswork and get a genuine, fully compatible control system built to last.
[Shop and order at Western Tub and Pool]")
![Coleman 400 Series Circuit Board 101118 — In Stock & Ready to Ship
Your hot tub shouldn't sit cold. Get your Coleman spa back up and running with a brand-new 400 Series Circuit Board (Part #101118), available now at Western Tub and Pool.
[Shop and Order at Western Tub and Pool]
Bring Your Spa Back to Life
A faulty control board can shut your entire hot tub down — no heat, no jets, no relaxation. The Coleman 400 Series Circuit Board (#101118) is a direct replacement part designed to restore full functionality to your spa quickly and reliably.
Brand New Condition
This is a new replacement circuit board — not refurbished, not reconditioned. You're getting a fresh part with full performance you can count on.
Direct OEM Replacement
Designed as a drop-in replacement for Coleman and Maax Spa models that use the 400 Series control system, so you spend less time troubleshooting and more time soaking.
Wide Model Compatibility
This board is compatible with a broad range of Coleman and Maax Spa models, making it one of the most versatile circuit boards in our inventory. See the full compatibility list below.
Expert Support Included
Not sure if this is the right part? Our team at Western Tub and Pool is here to help. Call us at 1-855-248-0777 or email fixmytub@gmail.com and we'll point you in the right direction.
Compatible Hot Tub Models
The Coleman 400 Series Circuit Board (#101118) is used in many Coleman and Maax Spa models, including:
Coleman 400 Series Spas
Coleman Maax 400 Series Models
Maax Spas using 400 Series control systems
Additional cross-compatible models using the 101118 board configuration
Not sure if your model is listed? Call us at 1-855-248-0777 or send a photo of your existing board along with your model and serial number to fixmytub@gmail.com and we'll confirm compatibility before you order.
Part Details and Specifications
Specification
Details
Part Number
101118
Part Name
Coleman 400 Series Circuit Board
Condition
New
Compatible Brands
Coleman, Maax Spas
Part Type
Control / Circuit Board
Application
Hot Tub / Spa Electrical Control System
Dimensions and weight may vary depending on regional warehouse origin. Contact us for exact shipping specifications.
A Note on Regional Inventory
Western Tub and Pool is an international e-retailer. To serve customers across North America, Europe, and beyond, we source parts from warehouses in multiple regions. The same part may be available from more than one location, which can affect shipping times and costs.
To identify the origin of your part, look for the suffix on the part number:
U — United States
C — Canada
E — Europe
A — Asia
Some products may appear as duplicates across regions — this is intentional. You may want to select the suffix that best matches your location for faster delivery.
Frequently Asked Questions
How do I know if this circuit board is compatible with my hot tub?
Check your existing board's part number or look up your hot tub's make and model. If you're unsure, send us a photo of your current board along with your model name and serial number. Our team will confirm compatibility before you place an order.
Is this a new or used part?
This is a brand-new replacement circuit board — not refurbished or used.
How long will shipping take?
Shipping times depend on which regional warehouse fulfills your order. Once your order is placed, we can provide estimated delivery times. For urgent needs, contact us directly at 1-855-248-0777.
Can you help me find a part if I don't know the exact part number?
Absolutely. Send us a photo of the part, along with your hot tub's make, model, and serial number, and we'll do our best to identify the correct replacement. Email fixmytub@gmail.com to get started.
Do you ship internationally?
Yes, Western Tub and Pool ships internationally. Shipping costs and timelines will vary based on your location and the fulfillment warehouse. Contact us for details specific to your region.
Can't Find the Part You Need? We Can Help.
We specialize in hard-to-find hot tub and spa parts. If you're struggling to locate a specific component, don't give up — send us an email at fixmytub@gmail.com with the following information and we'll track it down for you:
Your part number (if known)
Photos of the existing part
Your hot tub's make and model
Your hot tub's serial number
Our team has helped thousands of spa owners find the exact parts they need to get back in the water.
Shop and Order at Western Tub and Pool
Ready to restore your spa? Order your Coleman 400 Series Circuit Board (#101118) today and get expert support every step of the way.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop and Order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4528/6793/101118__23134.1786745481.PNG?c=2 "Coleman 400 Series Circuit Board 101118 — In Stock & Ready to Ship
Your hot tub shouldn't sit cold. Get your Coleman spa back up and running with a brand-new 400 Series Circuit Board (Part #101118), available now at Western Tub and Pool.
[Shop and Order at Western Tub and Pool]
Bring Your Spa Back to Life
A faulty control board can shut your entire hot tub down — no heat, no jets, no relaxation. The Coleman 400 Series Circuit Board (#101118) is a direct replacement part designed to restore full functionality to your spa quickly and reliably.
Brand New Condition
This is a new replacement circuit board — not refurbished, not reconditioned. You're getting a fresh part with full performance you can count on.
Direct OEM Replacement
Designed as a drop-in replacement for Coleman and Maax Spa models that use the 400 Series control system, so you spend less time troubleshooting and more time soaking.
Wide Model Compatibility
This board is compatible with a broad range of Coleman and Maax Spa models, making it one of the most versatile circuit boards in our inventory. See the full compatibility list below.
Expert Support Included
Not sure if this is the right part? Our team at Western Tub and Pool is here to help. Call us at 1-855-248-0777 or email fixmytub@gmail.com and we'll point you in the right direction.
Compatible Hot Tub Models
The Coleman 400 Series Circuit Board (#101118) is used in many Coleman and Maax Spa models, including:
Coleman 400 Series Spas
Coleman Maax 400 Series Models
Maax Spas using 400 Series control systems
Additional cross-compatible models using the 101118 board configuration
Not sure if your model is listed? Call us at 1-855-248-0777 or send a photo of your existing board along with your model and serial number to fixmytub@gmail.com and we'll confirm compatibility before you order.
Part Details and Specifications
Specification
Details
Part Number
101118
Part Name
Coleman 400 Series Circuit Board
Condition
New
Compatible Brands
Coleman, Maax Spas
Part Type
Control / Circuit Board
Application
Hot Tub / Spa Electrical Control System
Dimensions and weight may vary depending on regional warehouse origin. Contact us for exact shipping specifications.
A Note on Regional Inventory
Western Tub and Pool is an international e-retailer. To serve customers across North America, Europe, and beyond, we source parts from warehouses in multiple regions. The same part may be available from more than one location, which can affect shipping times and costs.
To identify the origin of your part, look for the suffix on the part number:
U — United States
C — Canada
E — Europe
A — Asia
Some products may appear as duplicates across regions — this is intentional. You may want to select the suffix that best matches your location for faster delivery.
Frequently Asked Questions
How do I know if this circuit board is compatible with my hot tub?
Check your existing board's part number or look up your hot tub's make and model. If you're unsure, send us a photo of your current board along with your model name and serial number. Our team will confirm compatibility before you place an order.
Is this a new or used part?
This is a brand-new replacement circuit board — not refurbished or used.
How long will shipping take?
Shipping times depend on which regional warehouse fulfills your order. Once your order is placed, we can provide estimated delivery times. For urgent needs, contact us directly at 1-855-248-0777.
Can you help me find a part if I don't know the exact part number?
Absolutely. Send us a photo of the part, along with your hot tub's make, model, and serial number, and we'll do our best to identify the correct replacement. Email fixmytub@gmail.com to get started.
Do you ship internationally?
Yes, Western Tub and Pool ships internationally. Shipping costs and timelines will vary based on your location and the fulfillment warehouse. Contact us for details specific to your region.
Can't Find the Part You Need? We Can Help.
We specialize in hard-to-find hot tub and spa parts. If you're struggling to locate a specific component, don't give up — send us an email at fixmytub@gmail.com with the following information and we'll track it down for you:
Your part number (if known)
Photos of the existing part
Your hot tub's make and model
Your hot tub's serial number
Our team has helped thousands of spa owners find the exact parts they need to get back in the water.
Shop and Order at Western Tub and Pool
Ready to restore your spa? Order your Coleman 400 Series Circuit Board (#101118) today and get expert support every step of the way.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop and Order at Western Tub and Pool]")
![Coleman 400 Series Circuit Board 103097 — In Stock & Ready to Ship
Your hot tub shouldn't sit cold any longer than it has to. Western Tub and Pool carries the Coleman 400 Series Circuit Board (Part #103097), a genuine replacement part designed to get your spa up and running again — fast.
Shop and order at Western Tub and Pool, or call us at 1-855-248-0777.
[Shop Now] [Call Us: 1-855-248-0777]
Why Choose Western Tub and Pool?
New Replacement Parts, Ready to Ship
The Coleman 400 Series Circuit Board #103097 is sold new and sourced from verified suppliers across multiple regions, so you're getting a quality part — not a worn-out substitute.
International Availability
As an international e-retailer, we ship from warehouses across the U.S., Canada, Europe, and Asia. More warehouses means faster shipping to your door, no matter where you are.
Expert Support, When You Need It
Not sure if this is the right part? Our team knows hot tub repair inside and out. Call us, email us, or send us a photo — we'll help you find exactly what you need.
Hard-to-Find Parts, Found
If you've been searching elsewhere with no luck, you've come to the right place. We specialize in sourcing parts that other retailers don't carry.
Product Details
Part Name: Coleman 400 Series Circuit Board
Part Number: 103097
Condition: New
Compatible Models and Controls
The Coleman 400 Series Circuit Board #103097 is used across a wide range of Coleman and Maax Spa models, including those featuring 400 Series control systems. Compatible controls typically include standard Coleman/Maax 400 Series topside control panels.
Not sure if this part fits your spa? Check your existing circuit board for a matching part number, or call us at 1-855-248-0777 and we'll confirm compatibility for you.
Cross-Reference Part Numbers
This circuit board may also be listed or referenced under the following numbers depending on your model or region:
103097
Coleman 400 Series Board variants
If your part number includes a regional suffix, here's what it means:
U = U.S.A. sourced
C = Canada sourced
E = Europe sourced
A = Asia sourced
Some parts may be available from more than one regional warehouse. Always verify your suffix when ordering to ensure you receive the correct version.
Associated Repair Parts
When replacing your circuit board, you may also want to consider the following commonly associated components:
Topside control panel
Spa pack / control box
Sensors and probes
Heater assembly
Circulation pump
Browse our full catalog online or call us to build a complete repair parts list for your spa.
Dimensions and Weight
Dimensions and weight vary slightly by production batch and regional origin. For exact specifications, please contact our team at 1-855-248-0777 or email fixmytub@gmail.com and we'll provide the precise measurements for the unit in stock.
Compatible Hot Tub Models
The Coleman 400 Series Circuit Board #103097 is used in a wide variety of Coleman and Maax Spa models. Common compatible models include Coleman and Maax spas built with the 400 Series control platform.
Don't see your model listed? Send us your spa's make, model, serial number, and a photo of your existing circuit board. We'll cross-reference it and confirm whether this part is the right fit.
Frequently Asked Questions
How do I know if this is the right circuit board for my hot tub?
Check your existing circuit board for the part number 103097 or a 400 Series designation. If you're unsure, send us your hot tub's make, model, and serial number — or a clear photo of the existing board — and our team will verify compatibility before you order.
What does the suffix on my part number mean?
Western Tub and Pool sources parts from warehouses in the U.S., Canada, Europe, and Asia. We add a regional suffix to each part to indicate its origin: U (USA), C (Canada), E (Europe), and A (Asia). Some parts may be available from multiple regions, which can affect shipping times and costs.
How long will shipping take?
Shipping times depend on the warehouse fulfilling your order and your delivery location. As an international e-retailer, we work to ship from the closest available warehouse to reduce delivery time. Contact us for estimated shipping timelines for your region.
Can I return the part if it doesn't fit?
Yes. Please contact us before returning any item so our team can assist you and ensure you receive the correct replacement. Reach us at 1-855-248-0777 or fixmytub@gmail.com.
What if I can't find my part number?
No problem. Send us an email with photos of the part, along with your spa's make, model, and serial number, and we'll do our best to identify the correct replacement part for you.
Do you sell other Coleman and Maax Spa parts?
Yes! We carry a wide range of Coleman and Maax Spa replacement parts, including control panels, heaters, pumps, sensors, and more. Browse our online catalog or call us and we'll help you find what you need.
Not Sure What You Need? We'll Help You Find It.
Hard-to-find part? No problem. Send us an email at fixmytub@gmail.com with the following details and we'll track it down for you:
Your part number (if known)
Clear photos of the existing part
Your spa's make, model, and serial number
Our team of hot tub parts specialists is here to help — whether you're a first-time DIYer or a seasoned technician.
Get Your Spa Back Up and Running Today
Shop and order at Western Tub and Pool — your trusted source for Coleman and Maax Spa replacement parts, shipped internationally.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop the Full Catalog] [Contact Us]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4530/6795/103097__19897.1787158542.PNG?c=2 "Coleman 400 Series Circuit Board 103097 — In Stock & Ready to Ship
Your hot tub shouldn't sit cold any longer than it has to. Western Tub and Pool carries the Coleman 400 Series Circuit Board (Part #103097), a genuine replacement part designed to get your spa up and running again — fast.
Shop and order at Western Tub and Pool, or call us at 1-855-248-0777.
[Shop Now] [Call Us: 1-855-248-0777]
Why Choose Western Tub and Pool?
New Replacement Parts, Ready to Ship
The Coleman 400 Series Circuit Board #103097 is sold new and sourced from verified suppliers across multiple regions, so you're getting a quality part — not a worn-out substitute.
International Availability
As an international e-retailer, we ship from warehouses across the U.S., Canada, Europe, and Asia. More warehouses means faster shipping to your door, no matter where you are.
Expert Support, When You Need It
Not sure if this is the right part? Our team knows hot tub repair inside and out. Call us, email us, or send us a photo — we'll help you find exactly what you need.
Hard-to-Find Parts, Found
If you've been searching elsewhere with no luck, you've come to the right place. We specialize in sourcing parts that other retailers don't carry.
Product Details
Part Name: Coleman 400 Series Circuit Board
Part Number: 103097
Condition: New
Compatible Models and Controls
The Coleman 400 Series Circuit Board #103097 is used across a wide range of Coleman and Maax Spa models, including those featuring 400 Series control systems. Compatible controls typically include standard Coleman/Maax 400 Series topside control panels.
Not sure if this part fits your spa? Check your existing circuit board for a matching part number, or call us at 1-855-248-0777 and we'll confirm compatibility for you.
Cross-Reference Part Numbers
This circuit board may also be listed or referenced under the following numbers depending on your model or region:
103097
Coleman 400 Series Board variants
If your part number includes a regional suffix, here's what it means:
U = U.S.A. sourced
C = Canada sourced
E = Europe sourced
A = Asia sourced
Some parts may be available from more than one regional warehouse. Always verify your suffix when ordering to ensure you receive the correct version.
Associated Repair Parts
When replacing your circuit board, you may also want to consider the following commonly associated components:
Topside control panel
Spa pack / control box
Sensors and probes
Heater assembly
Circulation pump
Browse our full catalog online or call us to build a complete repair parts list for your spa.
Dimensions and Weight
Dimensions and weight vary slightly by production batch and regional origin. For exact specifications, please contact our team at 1-855-248-0777 or email fixmytub@gmail.com and we'll provide the precise measurements for the unit in stock.
Compatible Hot Tub Models
The Coleman 400 Series Circuit Board #103097 is used in a wide variety of Coleman and Maax Spa models. Common compatible models include Coleman and Maax spas built with the 400 Series control platform.
Don't see your model listed? Send us your spa's make, model, serial number, and a photo of your existing circuit board. We'll cross-reference it and confirm whether this part is the right fit.
Frequently Asked Questions
How do I know if this is the right circuit board for my hot tub?
Check your existing circuit board for the part number 103097 or a 400 Series designation. If you're unsure, send us your hot tub's make, model, and serial number — or a clear photo of the existing board — and our team will verify compatibility before you order.
What does the suffix on my part number mean?
Western Tub and Pool sources parts from warehouses in the U.S., Canada, Europe, and Asia. We add a regional suffix to each part to indicate its origin: U (USA), C (Canada), E (Europe), and A (Asia). Some parts may be available from multiple regions, which can affect shipping times and costs.
How long will shipping take?
Shipping times depend on the warehouse fulfilling your order and your delivery location. As an international e-retailer, we work to ship from the closest available warehouse to reduce delivery time. Contact us for estimated shipping timelines for your region.
Can I return the part if it doesn't fit?
Yes. Please contact us before returning any item so our team can assist you and ensure you receive the correct replacement. Reach us at 1-855-248-0777 or fixmytub@gmail.com.
What if I can't find my part number?
No problem. Send us an email with photos of the part, along with your spa's make, model, and serial number, and we'll do our best to identify the correct replacement part for you.
Do you sell other Coleman and Maax Spa parts?
Yes! We carry a wide range of Coleman and Maax Spa replacement parts, including control panels, heaters, pumps, sensors, and more. Browse our online catalog or call us and we'll help you find what you need.
Not Sure What You Need? We'll Help You Find It.
Hard-to-find part? No problem. Send us an email at fixmytub@gmail.com with the following details and we'll track it down for you:
Your part number (if known)
Clear photos of the existing part
Your spa's make, model, and serial number
Our team of hot tub parts specialists is here to help — whether you're a first-time DIYer or a seasoned technician.
Get Your Spa Back Up and Running Today
Shop and order at Western Tub and Pool — your trusted source for Coleman and Maax Spa replacement parts, shipped internationally.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop the Full Catalog] [Contact Us]")
![Coleman 167R1 Circuit Board (Part #106983) — OEM Replacement
Get your hot tub back up and running with the exact circuit board it needs. Western Tub and Pool carries the Coleman 167R1 Control Board (Part #106983)—a genuine replacement part for a wide range of Coleman and Maax Spa models.
[Shop and Order at Western Tub and Pool]
The Right Part. The Right Price. Shipped to You.
A faulty control board can shut your entire spa down. Don't let a single component keep you out of the water longer than necessary. The Coleman 167R1 Circuit Board is a direct OEM-compatible replacement designed to restore full functionality to your hot tub quickly and reliably.
New Condition
This part is sold brand new—not refurbished or reconditioned. You get full performance from day one.
Broad Compatibility
The Coleman 167R1 (Part #106983) is used across a wide range of Coleman and Maax Spa models, making it one of the most versatile control boards in the lineup.
Expert Support Available
Not sure if this is the right part for your spa? Our team is ready to help. Call us at 1-855-248-0777 or email fixmytub@gmail.com and we'll confirm compatibility before you order.
International Shipping Available
As an international e-retailer, Western Tub and Pool ships from warehouse locations across multiple regions. Parts sourced from different regions carry a regional suffix for easy identification:
U — United States
C — Canada
E — Europe
A — Asia
Please note that some parts may be available from more than one regional warehouse, which can affect shipping origin and delivery times.
Compatible Hot Tub Models
The Coleman 167R1 Circuit Board (Part #106983) is compatible with many Coleman and Maax Spa models, including but not limited to:
Coleman Spas (various series — call to confirm your specific model)
Maax Spas (compatible models — call to confirm your specific model)
Not sure if your model is on the list? Send us your hot tub's make, model, and serial number—or a photo of your existing control board—and our parts specialists will verify compatibility for you.
Cross-reference part numbers associated with this board may include related control system components, so be sure to check your existing part number or consult our online catalogue for the most up-to-date cross-reference list.
Part Specifications
Specification
Details
Part Name
Coleman 167R1 Circuit Board
Part Number
106983
Condition
New
Compatible Brands
Coleman Spas, Maax Spas
Dimensions
Please contact us or refer to our online catalogue for exact dimensions
Weight
Please contact us or refer to our online catalogue for exact weight
Regional Suffixes
U (USA), C (Canada), E (Europe), A (Asia)
For precise dimensions and weight, please visit our online catalogue or contact our team directly—specifications may vary slightly depending on the regional warehouse your part ships from.
Frequently Asked Questions
How do I know if the Coleman 167R1 is the right circuit board for my spa?
Check the part number on your existing circuit board, or locate your spa's make, model, and serial number. You can then cross-reference this with our catalogue or contact our team at 1-855-248-0777 or fixmytub@gmail.com. Sending us a photo of your current board is often the fastest way to confirm compatibility.
Why does my part number have a letter suffix (U, C, E, or A)?
Western Tub and Pool is an international e-retailer with warehouse locations across the US, Canada, Europe, and Asia. The suffix on your part number indicates the regional origin of that specific unit. Parts with different suffixes may be functionally identical but sourced from different warehouses, which can affect shipping logistics and delivery timelines.
Can I order this part if I'm located outside of the United States?
Yes. We ship internationally. Depending on your location, your order may be fulfilled from the nearest regional warehouse. Contact us for shipping rates and estimated delivery times to your region.
What if I receive the wrong part or it doesn't fit my spa?
Our team is here to make it right. Reach out to us at fixmytub@gmail.com or call 1-855-248-0777 and we'll work with you to find the correct part or resolve any issues with your order.
Do you carry other hot tub replacement parts that work with this circuit board?
Yes. The Coleman 167R1 Circuit Board is associated with a number of related repair and replacement parts. Visit our online catalogue to browse compatible components, or call us and we'll help you identify everything you need for a complete repair.
Can't Find What You're Looking For?
Hard-to-find part? We specialize in exactly that.
Send us an email at fixmytub@gmail.com with your:
Hot tub make and model
Serial number
Existing part number (if known)
Photos of the part needing replacement
Our parts specialists will track it down for you—no matter where in the world you're located.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop and Order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4527/6792/106983__51123.1786743463.PNG?c=2 "Coleman 167R1 Circuit Board (Part #106983) — OEM Replacement
Get your hot tub back up and running with the exact circuit board it needs. Western Tub and Pool carries the Coleman 167R1 Control Board (Part #106983)—a genuine replacement part for a wide range of Coleman and Maax Spa models.
[Shop and Order at Western Tub and Pool]
The Right Part. The Right Price. Shipped to You.
A faulty control board can shut your entire spa down. Don't let a single component keep you out of the water longer than necessary. The Coleman 167R1 Circuit Board is a direct OEM-compatible replacement designed to restore full functionality to your hot tub quickly and reliably.
New Condition
This part is sold brand new—not refurbished or reconditioned. You get full performance from day one.
Broad Compatibility
The Coleman 167R1 (Part #106983) is used across a wide range of Coleman and Maax Spa models, making it one of the most versatile control boards in the lineup.
Expert Support Available
Not sure if this is the right part for your spa? Our team is ready to help. Call us at 1-855-248-0777 or email fixmytub@gmail.com and we'll confirm compatibility before you order.
International Shipping Available
As an international e-retailer, Western Tub and Pool ships from warehouse locations across multiple regions. Parts sourced from different regions carry a regional suffix for easy identification:
U — United States
C — Canada
E — Europe
A — Asia
Please note that some parts may be available from more than one regional warehouse, which can affect shipping origin and delivery times.
Compatible Hot Tub Models
The Coleman 167R1 Circuit Board (Part #106983) is compatible with many Coleman and Maax Spa models, including but not limited to:
Coleman Spas (various series — call to confirm your specific model)
Maax Spas (compatible models — call to confirm your specific model)
Not sure if your model is on the list? Send us your hot tub's make, model, and serial number—or a photo of your existing control board—and our parts specialists will verify compatibility for you.
Cross-reference part numbers associated with this board may include related control system components, so be sure to check your existing part number or consult our online catalogue for the most up-to-date cross-reference list.
Part Specifications
Specification
Details
Part Name
Coleman 167R1 Circuit Board
Part Number
106983
Condition
New
Compatible Brands
Coleman Spas, Maax Spas
Dimensions
Please contact us or refer to our online catalogue for exact dimensions
Weight
Please contact us or refer to our online catalogue for exact weight
Regional Suffixes
U (USA), C (Canada), E (Europe), A (Asia)
For precise dimensions and weight, please visit our online catalogue or contact our team directly—specifications may vary slightly depending on the regional warehouse your part ships from.
Frequently Asked Questions
How do I know if the Coleman 167R1 is the right circuit board for my spa?
Check the part number on your existing circuit board, or locate your spa's make, model, and serial number. You can then cross-reference this with our catalogue or contact our team at 1-855-248-0777 or fixmytub@gmail.com. Sending us a photo of your current board is often the fastest way to confirm compatibility.
Why does my part number have a letter suffix (U, C, E, or A)?
Western Tub and Pool is an international e-retailer with warehouse locations across the US, Canada, Europe, and Asia. The suffix on your part number indicates the regional origin of that specific unit. Parts with different suffixes may be functionally identical but sourced from different warehouses, which can affect shipping logistics and delivery timelines.
Can I order this part if I'm located outside of the United States?
Yes. We ship internationally. Depending on your location, your order may be fulfilled from the nearest regional warehouse. Contact us for shipping rates and estimated delivery times to your region.
What if I receive the wrong part or it doesn't fit my spa?
Our team is here to make it right. Reach out to us at fixmytub@gmail.com or call 1-855-248-0777 and we'll work with you to find the correct part or resolve any issues with your order.
Do you carry other hot tub replacement parts that work with this circuit board?
Yes. The Coleman 167R1 Circuit Board is associated with a number of related repair and replacement parts. Visit our online catalogue to browse compatible components, or call us and we'll help you identify everything you need for a complete repair.
Can't Find What You're Looking For?
Hard-to-find part? We specialize in exactly that.
Send us an email at fixmytub@gmail.com with your:
Hot tub make and model
Serial number
Existing part number (if known)
Photos of the part needing replacement
Our parts specialists will track it down for you—no matter where in the world you're located.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop and Order at Western Tub and Pool]")
![Coleman 100 Series Circuit Board 101285 — Get Your Hot Tub Running Again
Your hot tub shouldn't sit cold. The Coleman 100 Series Circuit Board (Part #101285) is a genuine replacement part that restores full functionality to your spa — fast. Whether you're troubleshooting a dead control panel or replacing a faulty board, this is the part you need.
Shop and order at Western Tub and Pool.
[Shop Now] | Call us: 1-855-248-0777 | Email: fixmytub@gmail.com
What Is the Coleman 100 Series Circuit Board?
The Coleman 100 Series Circuit Board (Part #101285) is the brain of your hot tub's control system. It manages your spa's heating, jets, lighting, and other core functions. When it fails, your hot tub stops working — but replacing it is straightforward with the right part.
This board is sold as new and is compatible with a wide range of Coleman and Maax hot tub models.
Part Number: 101285
Series: Coleman 100 Series
Condition: New
Manufacturer: Coleman / Maax
Compatible Hot Tub Models
The Coleman 100 Series Circuit Board (101285) is used in many Coleman and Maax spa models, including:
Coleman 100 Series Spas
Coleman SaluSpa Models
Maax Spas 100 Series
Various OEM-equivalent models across the Coleman/Maax product range
Not sure if this part fits your hot tub? Call us at 1-855-248-0777 or email fixmytub@gmail.com with your make, model, and serial number, and our team will confirm compatibility for you.
Cross-Reference & Associated Part Numbers
This board may also be referenced under the following numbers depending on your spa's documentation or original manufacturer labeling:
101285
Coleman 100 Series control board variants
Maax equivalent circuit board references
Associated Repair Parts Often Ordered With This Item:
Topside control panels
Temperature sensors
Pressure switches
Heater elements
Control panel overlays
Circulation pumps
Transformer components
Check our full online catalog or call us directly to bundle parts and save on shipping.
Product Specifications
Specification
Details
Part Number
101285
Series
Coleman 100 Series
Condition
New
Compatible Brands
Coleman, Maax
Function
Main circuit / control board
Typical Application
Full spa system control
Note on dimensions and weight: Dimensions and shipping weight may vary slightly depending on regional warehouse origin. Contact us at 1-855-248-0777 for precise measurements before ordering if required for installation planning.
Frequently Asked Questions
How do I know if this circuit board fits my hot tub?
Check your spa's model number and serial number, typically found on a sticker inside the equipment compartment or on the cabinet exterior. You can also send us a photo of your current board, and our team will verify compatibility. Email us at fixmytub@gmail.com or call 1-855-248-0777.
Is this a new or refurbished part?
This is a new circuit board — not refurbished or remanufactured.
What does the circuit board control?
The circuit board is the central control hub of your hot tub. It regulates heating, jet functions, lighting, filtration cycles, and temperature settings. A faulty board can cause your spa to stop heating, fail to respond to controls, or shut down entirely.
How long will shipping take?
Western Tub and Pool is an international e-tailer. We ship from warehouses across multiple regions, including the USA, Canada, Europe, and Asia. Shipping times will vary depending on which warehouse fulfills your order.
To help you identify your part's regional origin, we use the following suffixes on part numbers:
U = United States
C = Canada
E = Europe
A = Asia
Some parts may be available from more than one regional warehouse. If you have a specific part number, check your suffix or contact us and we'll clarify which region will be fulfilling your order.
Can I return or exchange the part if it doesn't work?
Contact our team directly at fixmytub@gmail.com or call 1-855-248-0777 to discuss return and exchange options. We're here to make sure you get the right part.
What if I don't know my part number?
No problem. Send us an email with photos of your current circuit board, along with the make, model, and serial number of your hot tub. Our team will help you identify the correct part.
Hard-to-Find Parts? We Can Help.
Can't find what you're looking for in our catalog? We specialize in sourcing hard-to-find hot tub and spa parts for Coleman, Maax, and many other brands.
Send us an email at fixmytub@gmail.com with:
Photos of the part you need
Your hot tub's make and model
Your serial number (if available)
Our team will do the research and get back to you with options.
Order the Coleman 100 Series Circuit Board Today
Don't let a faulty circuit board keep your hot tub out of commission. The Coleman 100 Series Circuit Board (101285) is in stock and ready to ship.
Shop and order at Western Tub and Pool.
[Shop Now]
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
Browse our catalog: [Western Tub and Pool Online Store]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4507/6770/101285__94435.1786477467.PNG?c=2 "Coleman 100 Series Circuit Board 101285 — Get Your Hot Tub Running Again
Your hot tub shouldn't sit cold. The Coleman 100 Series Circuit Board (Part #101285) is a genuine replacement part that restores full functionality to your spa — fast. Whether you're troubleshooting a dead control panel or replacing a faulty board, this is the part you need.
Shop and order at Western Tub and Pool.
[Shop Now] | Call us: 1-855-248-0777 | Email: fixmytub@gmail.com
What Is the Coleman 100 Series Circuit Board?
The Coleman 100 Series Circuit Board (Part #101285) is the brain of your hot tub's control system. It manages your spa's heating, jets, lighting, and other core functions. When it fails, your hot tub stops working — but replacing it is straightforward with the right part.
This board is sold as new and is compatible with a wide range of Coleman and Maax hot tub models.
Part Number: 101285
Series: Coleman 100 Series
Condition: New
Manufacturer: Coleman / Maax
Compatible Hot Tub Models
The Coleman 100 Series Circuit Board (101285) is used in many Coleman and Maax spa models, including:
Coleman 100 Series Spas
Coleman SaluSpa Models
Maax Spas 100 Series
Various OEM-equivalent models across the Coleman/Maax product range
Not sure if this part fits your hot tub? Call us at 1-855-248-0777 or email fixmytub@gmail.com with your make, model, and serial number, and our team will confirm compatibility for you.
Cross-Reference & Associated Part Numbers
This board may also be referenced under the following numbers depending on your spa's documentation or original manufacturer labeling:
101285
Coleman 100 Series control board variants
Maax equivalent circuit board references
Associated Repair Parts Often Ordered With This Item:
Topside control panels
Temperature sensors
Pressure switches
Heater elements
Control panel overlays
Circulation pumps
Transformer components
Check our full online catalog or call us directly to bundle parts and save on shipping.
Product Specifications
Specification
Details
Part Number
101285
Series
Coleman 100 Series
Condition
New
Compatible Brands
Coleman, Maax
Function
Main circuit / control board
Typical Application
Full spa system control
Note on dimensions and weight: Dimensions and shipping weight may vary slightly depending on regional warehouse origin. Contact us at 1-855-248-0777 for precise measurements before ordering if required for installation planning.
Frequently Asked Questions
How do I know if this circuit board fits my hot tub?
Check your spa's model number and serial number, typically found on a sticker inside the equipment compartment or on the cabinet exterior. You can also send us a photo of your current board, and our team will verify compatibility. Email us at fixmytub@gmail.com or call 1-855-248-0777.
Is this a new or refurbished part?
This is a new circuit board — not refurbished or remanufactured.
What does the circuit board control?
The circuit board is the central control hub of your hot tub. It regulates heating, jet functions, lighting, filtration cycles, and temperature settings. A faulty board can cause your spa to stop heating, fail to respond to controls, or shut down entirely.
How long will shipping take?
Western Tub and Pool is an international e-tailer. We ship from warehouses across multiple regions, including the USA, Canada, Europe, and Asia. Shipping times will vary depending on which warehouse fulfills your order.
To help you identify your part's regional origin, we use the following suffixes on part numbers:
U = United States
C = Canada
E = Europe
A = Asia
Some parts may be available from more than one regional warehouse. If you have a specific part number, check your suffix or contact us and we'll clarify which region will be fulfilling your order.
Can I return or exchange the part if it doesn't work?
Contact our team directly at fixmytub@gmail.com or call 1-855-248-0777 to discuss return and exchange options. We're here to make sure you get the right part.
What if I don't know my part number?
No problem. Send us an email with photos of your current circuit board, along with the make, model, and serial number of your hot tub. Our team will help you identify the correct part.
Hard-to-Find Parts? We Can Help.
Can't find what you're looking for in our catalog? We specialize in sourcing hard-to-find hot tub and spa parts for Coleman, Maax, and many other brands.
Send us an email at fixmytub@gmail.com with:
Photos of the part you need
Your hot tub's make and model
Your serial number (if available)
Our team will do the research and get back to you with options.
Order the Coleman 100 Series Circuit Board Today
Don't let a faulty circuit board keep your hot tub out of commission. The Coleman 100 Series Circuit Board (101285) is in stock and ready to ship.
Shop and order at Western Tub and Pool.
[Shop Now]
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
Browse our catalog: [Western Tub and Pool Online Store]")
