Product Description

Hot Tub Pump Power Cord — 8 ft, 4-Pin MP, 2-Speed Pump

Part Number: 30-0326-96

Your hot tub pump has stopped running — and a worn or damaged power cord might be all that stands between you and your next soak. Get your spa back up and running fast with this direct-fit 8-foot, 4-pin MP pump power cord, designed specifically for 2-speed spa pumps.

Shop and order at Western Tub and Pool — or call us directly at 1-855-248-0777.

[Order Now] [Call Us: 1-855-248-0777]

Product Specifications

Please note: This cord ships with the AMP pins and connector separated. This allows you to place the pins in the correct order to match your specific spa controller, as different manufacturers use different pin and color configurations. If you are unsure how to configure your cord, call us at 1-855-248-0777 — we are happy to walk you through it.

Why This is the Right Cord for Your Spa Pump

Industry-Standard 4-Pin AMP Connector

The 4-pin AMP (MP-style) male plug is the industry standard for 2-speed spa pump power cords. This means it is compatible with a wide range of hot tub brands and control systems right out of the box.

Extra Length for Easy Installation

At 8 full feet (96 inches), this cord gives you the flexibility you need to route the cable cleanly through your spa cabinet without straining connections or compromising safety. Shorter cords — like the common 48" versions — simply do not reach in many configurations.

14/4 AWG Heavy-Duty Wiring

Built with 14-gauge, 4-wire construction (Black, Red, White, Green), this cord is rated for the current demands of 2-speed spa pumps across both 115V and 230V systems.

Works with 1-Speed Pumps Too

If you have a single-speed pump that uses a 4-pin AMP connector, this cord will work — simply eliminate one wire from the configuration.

Compatible Hot Tub Brands and Pump Systems

This 8-foot, 4-pin AMP pump power cord is used across a wide range of hot tub brands and spa control systems, including pumps and controls from:

• Aqua-Flo (FMHP, FMCP, XP2 series — 115V and 230V 2-speed pumps)
• Waterway Plastics (2-speed pump models using AMP connectors)
• Caldera Spas (2002 and above, using Advent Control Box)
• Marquis Spas (2-speed pump configurations)
• Cal Spas (2-speed pump models)
• DreamMaker / AquaRest Spas (2-speed pump configurations)
• Artesian Spas (2-speed pump models)
• Jacuzzi / Sundance Spas (select 2-speed pump models)
• Master Spas (select 2-speed pump configurations)
• Coleman / Maax Spas (2-speed pump models)
• Dimension One Spas (select models)
• Dynasty Spas (select models)
• Vita Spas (select models)
• NEO 2100 Control Kit (w/Retro Kit 780-8020, ref. p/n 741-CGGG-45X)

Not sure if this cord fits your pump? Check your existing part number, or send us your hot tub's make, model, and serial number — and a photo of the existing cord — and our team will confirm compatibility before you order. Email us at fixmytub@gmail.com.

How to Identify Your Pump Power Cord

Before ordering, here are a few quick checks to confirm this is the right cord for your spa:

1. Count the Pins

Look at the connector on your existing pump cord. A 2-speed pump cord uses a 4-pin AMP connector. A 1-speed pump uses a 3-pin connector. If yours has 4 pins, this cord will work.

2. Check the Wire Colors

A standard 4-wire, 2-speed AMP pump cord contains four wires: Black, Red, White, and Green. If your existing cord matches this color configuration, you have a standard 2-speed AMP cord.

3. Measure the Cord Length

If your current cord is frayed, burned, or damaged at the pump end, measure from the control box to the pump to confirm that 8 feet is the right length for your installation. We also carry 48-inch (4 ft) and 72-inch (6 ft) versions — call us if you need a different length.

4. Check Your Part Number

Common cross-reference part numbers for this cord include:

• 30-0326-96 (8-foot AMP 2-speed cord)
• 30-1001A (72-inch version)
• 741-CGGG-45X (48-inch version, also used in NEO 2100 kit)

Frequently Asked Questions

Is this cord compatible with my spa if I don't know the part number?

Yes — in many cases. If your spa uses a 2-speed pump with a 4-pin AMP-style connector, this cord is likely compatible. The safest approach is to send us your spa's make, model, and serial number, along with a photo of the existing cord and connector, and we will confirm the fit. Email us at fixmytub@gmail.com or call 1-855-248-0777.

Why does this cord ship with the pins separated?

Different spa control manufacturers wire their AMP connectors in different pin-color sequences. By shipping the cord with the pins loose, you can arrange them to match your specific controller's configuration exactly. If this sounds complicated, don't worry — our team can guide you through it over the phone.

Can I use this cord on a 1-speed pump?

Yes. Single-speed pumps that use a 4-pin AMP connector can use this cord — simply leave one wire out of the connector. Alternatively, we carry a dedicated 1-speed pump cord if you prefer a clean, exact fit.

What if I order the wrong cord?

Contact us immediately at fixmytub@gmail.com or 1-855-248-0777 and we will help sort it out. We stock a wide range of cord lengths and configurations, so there is a good chance we can swap you into the right part quickly.

Do you offer help identifying other hard-to-find spa parts?

Absolutely. Western Tub and Pool specializes in replacement hot tub and spa parts, including hard-to-find components. If you cannot find what you need in our online catalogue, send us an email with your part number (if known), photos, and your spa's make, model, and serial number — and we will do the legwork for you.

Is this cord suitable for both 115V and 230V systems?

Yes. The 14/4 AWG wire gauge and 4-pin AMP connector in this cord are compatible with both 115V and 230V 2-speed spa pump installations.

Can't Find Your Part? We Can Help.

Western Tub and Pool is your go-to source for hot tub and spa replacement parts — including the hard-to-find ones. If you are unsure which cord you need, or if you are chasing a part that does not seem to exist anywhere online, reach out. Our team has the experience to identify the right part from nothing more than a photo and a model number.

Here's how to get help fast:

• Email us:fixmytub@gmail.com — include your spa's make, model, and serial number, plus photos of the part you need to replace
• Call us: 1-855-248-0777
• Browse our catalogue: Check our full online parts catalogue for additional pump cords, pump replacement parts, controls, heaters, jets, and more

Get Your Hot Tub Running Again Today

A broken pump cord should not mean days without your spa. This 8-foot, 4-pin AMP pump power cord is in stock and ready to ship.

Shop and order at Western Tub and Pool.

[Order Now] [Browse Our Full Parts Catalogue] [Call 1-855-248-0777]