Canadian Dollars
US Dollar
Euro
There are no products listed under this category.
Shop by Brand
Okotoks New hot tub covers and Hot tub lifters
Custom Replacement Spa Covers & Cover Lifters — Okotoks, AB
Your hot tub cover works hard every single day. When it starts to sag, waterlog, or lose its seal, your energy bills climb and your spa suffers. Western Tub and Pool Okotoks supplies and installs premium custom-fit replacement spa covers and cover lifters — built to protect your investment and keep your running costs low.
Shop and order at Western Tub and Pool Okotoks — 587-333-2391
[Get a Free Quote] [Call Us Now: 587-333-2391]
Why a New Spa Cover Makes All the Difference
A worn-out cover doesn't just look bad — it costs you money. A quality replacement spa cover can save you up to $80 per year on your electricity bill by locking in heat and keeping the elements out. Whether you own a hot tub or a full swim spa, a properly fitted cover is one of the smartest investments you can make.
Custom-Measured for a Perfect Fit
We come to you. Our team visits your home to take precise measurements, so your new cover fits exactly as it should — no guesswork, no gaps, no heat loss.
Delivery, Installation & Old Cover Removal
We handle everything. From delivery to installation to hauling away your old cover, Western Tub and Pool makes the upgrade completely hassle-free.
Built for Alberta Weather
Our covers are engineered for year-round performance in Canada's toughest climates. Thick tapered foam, reinforced hinges, and durable marine-grade vinyl mean your spa stays protected whether it's a scorching summer or a heavy Alberta snowfall.
Alpine Spa Covers — Technical Summary & Options
We proudly supply Alpine Spa Covers, one of Canada's leading cover manufacturers based in Vernon, BC. Here's a breakdown of what's available:
Classic Silver Line (1.5 lb Foam | 2-Year Warranty)
|
Model |
R-Rating |
Best For |
|---|---|---|
|
3″ Flat |
R12 |
Indoor or seasonal use |
|
4″–2″ Tapered |
R12 |
Debris protection, lower running costs |
|
4″–3″ Tapered |
R14 |
Standard year-round cover |
|
5″–3″ Tapered |
R16 |
Most popular — maximum run-off, no pooling |
|
5″–4″ Tapered |
R18 |
Superior insulation |
|
6″–4″ Tapered |
R20 |
Extreme climates, heavy snow regions |
Classic Gold Line (2.0 lb Foam | 3-Year Warranty)
|
Model |
R-Rating |
|---|---|
|
4″–3″ Tapered |
R16 |
|
5″–4″ Tapered |
R21 |
Key construction features across all Alpine covers:
- Aluminum C-channels for added structural strength
- Full-length closed-cell foam baffle gaskets to seal and insulate the entire center hinge
- Standard 4-mil polyethylene vapor barrier around the foam core to resist water absorption
Vapor Barrier (Poly) Upgrades
Upgrading your poly wrap extends cover life by protecting the foam core from moisture damage:
- 6 mil
- 8 mil
- 10 mil (6 mil + 4 mil)
- 12 mil (6 mil + 6 mil)
- 14 mil (8 mil + 6 mil)
Handle Options
- Integrated Handle — sleek, modern, standard placement
- Rubber Handle — comfortable grip, durable
- Legacy Handle — available for custom positioning
- Inside Handles — ideal when using a standard cover lifter; allows safe, easy closing from inside the tub without stressing the liner or baffle
Skirt Options
The skirt hangs down from the cover's edge to seal the spa and improve its appearance. Options include:
- Standard skirt lengths from 1″ to 10″
- Split skirts — can be split at the end of the radius or at the center of the radius to accommodate cabinet obstructions, steps, or equipment
Additional Upgrade Options
- Reinforced hinge — added durability at the fold
- Full insulated hinge (heat seal) — reduces heat loss through the center fold by up to 20%; pays for itself within the first year
- Heavy-duty wind straps — four straps double-sewn to the cover to prevent wind damage
- Safety straps with lockable clips — child and pet safety; adjustable from 1″ to 9″
- Cover lifter plates — required if your lifter screws directly into the cover sides or back
- Double-wrapped foam core — increases cover life by up to 20%
Color Selections
Choose from a wide range of vinyl and weathershield colors to complement your backyard, including:
- Vinyl: Black, Charcoal Grey, Coastal Grey, Mahogany, Mayan Brown, Mocha, Navy Blue, Bourbon, Hunter Green, Tan, Walnut, Sky Blue, Parchment, and more
- Weathershield: Oxford Grey, Brazilian Mahogany, Coffee Brown, Desert Taupe, and Jet Black
Compatible Hot Tub & Swim Spa Brands
Our custom-measured covers are built to fit virtually any brand or model. We regularly supply covers for:
Hot Tub Brands:
- Hot Spring Spas
- Caldera Spas (including Alpine, Alpine II)
- Sundance Spas
- Jacuzzi
- Beachcomber Hot Tubs
- Dynasty Spas
- Marquis Spas
- Arctic Spas
- Master Spas
- Bullfrog Spas
- Nordic Hot Tubs
- Coleman Spas
- Cal Spas
- PDC Spas
- Dimension One Spas
Swim Spa Brands:
- Master Spas (Michael Phelps Series, H2X)
- Hydropool Swim Spas
- Endless Pool Swim Spas
- TidalFit
- SwimEx
- AquaTrainer
Not sure if your model is covered? Call us at 587-333-2391 and we'll confirm compatibility — or simply book a home measurement visit.
Cover Lifters
Take the strain out of removing your spa cover. We carry and install a range of cover lifters to suit every setup:
- CoverCradle — side-mounted, folds the cover neatly behind the tub
- Uprite Lifter — vertical storage, ideal for tight spaces
- Spring Lift & Glide — smooth, gas-assisted lifting mechanism
- Spa Cover Valet — lightweight and easy to operate solo
Ask us about which lifter best fits your hot tub model and backyard layout.
Frequently Asked Questions
How do I know when it's time to replace my spa cover?
If your cover feels noticeably heavier than it used to, that's a sign the foam core has absorbed water. Other tell-tale signs include visible cracking or fading of the vinyl, a sagging center, a broken hinge, or rising energy bills. A waterlogged cover can weigh over 100 lbs and provides very little insulation value.
Do I need to measure my own hot tub?
No — we come to you. Western Tub and Pool will visit your home in Okotoks and the surrounding area to take precise measurements. This ensures a custom, accurate fit every time.
What foam thickness should I choose for an Alberta climate?
For year-round outdoor use in Alberta, we typically recommend a minimum of a 5″–3″ taper with 1.5 lb or 2.0 lb foam density. The denser and thicker the foam, the better it handles snow loads and cold temperatures. Our team is happy to advise you on the best option for your specific setup.
How long does a replacement cover take to arrive?
Custom-manufactured covers from order to delivery can vary depending on the time of year with fall typically the busiest . We'll keep you informed throughout the process and schedule your installation as soon as your cover arrives.
Do you also remove and dispose of my old cover?
Yes. Our delivery and installation service includes removal of your old cover. You don't need to do a thing.
Can I get a cover for an odd-shaped or unusually sized spa?
Absolutely. Alpine also manufactures specialty spa covers for non-standard shapes and swim spas of all sizes. Contact us with your dimensions and we'll find the right solution.
What is included in the standard cover?
Every Alpine cover includes aluminum c-channels, full-length closed-cell foam baffle gaskets, a 4-mil polyethylene vapor barrier, a standard 4″ skirt, and safety straps with lockable clips. Upgrades are available for every component.
Get Your New Spa Cover Today
Don't let a failing cover drive up your energy costs or leave your spa exposed to the elements. Western Tub and Pool Okotoks makes the replacement process easy — from measuring to installation, we take care of it all.
Shop and order at Western Tub and Pool Okotoks — 587-333-2391
Or email us at: fixmytub@gmail.com
[Request a Free Home Measurement] [Call 587-333-2391]