Canadian Dollars
US Dollar
Euro
![Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear "yes" or "no" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4379/6622/ozonekit__30974.1779817701.PNG?c=2 "Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear \"yes\" or \"no\" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]")
![Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear "yes" or "no" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4379/6623/ozonekit3__58374.1779817709.PNG?c=2 "Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear \"yes\" or \"no\" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]")
![Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear "yes" or "no" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4379/6622/ozonekit__30974.1779817701.PNG?c=2 "Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear \"yes\" or \"no\" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]")
![Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear "yes" or "no" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4379/6623/ozonekit3__58374.1779817709.PNG?c=2 "Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear \"yes\" or \"no\" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]")
Product Description
Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear "yes" or "no" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
- Hot Spring
- Tiger River
- Limelight
- Hot Spot
- Solana
- Freeflow
- Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
- Dimensions: 8.75 x 4.3 x 1.75 inches
- Weight: 1 oz
- Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]
![Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear "yes" or "no" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4379/6622/ozonekit__30974.1779817701.PNG?c=2 "Test Your Hot Tub Ozonator in 30 Seconds
The Ultrapure 30 Second Ozone Detection Kit is the fastest, most reliable way to confirm your spa's ozone generator is actually working. Stop guessing and ensure your water stays crystal clear. Shop and order at Western tub and pool today.
[Order Your Test Kit Now]
Maintain Crystal Clear Spa Water
Seeing bubbles in your hot tub doesn't always mean your ozonator is working—it might just be air. With the Ultrapure 30 Second Ozone Detection Kit, you get definitive proof of ozone production, helping you keep your hot tub safe, clean, and efficient.
Stop wasting money on chemicals
When an ozonator fails, you end up spending more time and money balancing your spa's water chemistry. This simple test lets you know immediately if your unit needs replacing, saving you from constant chemical adjustments.
Fast, definitive results
Forget complicated water testing. This single-use kit changes color in just 30 seconds to give you a clear \"yes\" or \"no\" on your ozonator's health.
How to use the Ozone Detection Kit
1. Prepare the tube
Disconnect power from the spa. Break approximately 1/4 inch off each end of the glass test tube to allow airflow. Cut the small clear tubing in half and place both pieces over each end of the glass tube.
2. Connect to the ozonator
Disconnect the ozone tube from your ozonator. Ensuring the flow arrow points away from the ozonator, connect the test kit inline with the suction jet tube.
3. Run the test
Turn the spa and ozonator on for 30 seconds. (Note: Some ozonators only come on during the filter cycle).
4. Check the color
If the complete detection tube turns from blue to white, ozone is present! If the indicator material stays blue, your ozone generator is no longer producing enough ozone and needs to be replaced.
Compatible Hot Tub Models and Controls
The Ultrapure 30 Second Ozone Detection Kit (Part Number 1008069 / 6-05-0061TKS) is a universal inline test that works with almost any CD or UV ozone generator. It is widely used in many models and compatible control systems including Balboa and Gecko.
Compatible hot tub brands and models include, but are not limited to:
Hot Spring
Tiger River
Limelight
Hot Spot
Solana
Freeflow
Fantasy Spas
Check here and our online catalogue or call us to verify your specific model.
Product Specifications
Dimensions: 8.75 x 4.3 x 1.75 inches
Weight: 1 oz
Manufacturer Part Number: 1008069
Frequently asked questions
How often should I test my hot tub ozonator?
It is recommended to test your ozonator every 6 to 9 months. Most hot tub retailers forget to mention that ozonators typically only last for about 3 to 5 years before they stop producing ozone.
What if I see bubbles coming from my jets?
Bubbles only mean that air is flowing through the system. If the ozone generator has failed, those bubbles are just empty air. This test kit is the only way to confirm actual ozone gas is being produced.
What should I do if the test kit stays blue?
If the glass tube stays blue after 30 seconds of the ozonator running, it is time for a replacement ozonator or CD chip.
Do you offer hard to find product part assistance?
Yes! For hard to find product part assistance, send us an email to fixmytub@gmail.com. Check your part number if known, or send us pictures, the make and model of the hot tub, and the serial number so we can help you find exactly what you need.
Keep Your Spa Running Perfectly
Shop and order at Western tub and pool. Call us for more information or assistance with these replacement hot tub repair parts, products and other spa parts at Western Tub and pool 1-855-248-0777 or email us at fixmytub@gmail.com.
[Order Your Test Kit Now]")
![Spa Ozonator XL30-U — Cleaner Water, Zero Hassle
Stop fighting cloudy, chemical-heavy spa water. The Spa Ozonator XL30-U is a powerful, low-maintenance sanitation solution that automatically keeps your hot tub water clean, clear, and comfortable — all without harsh chemical overload.
SKU: SPA/XL30UL/U03
Price: $69.99
Shop and order at Western Tub and Pool.
[Order Now] [Call Us: 1-855-248-0777]
Why Your Spa Needs the XL30-U Ozonator
Your hot tub deserves more than a chemical cocktail. The XL30-U produces pure ozone — nature's most powerful oxidizer — that destroys organic and inorganic contaminants the moment it makes contact. The result? Fresher water, softer skin, and a spa experience that feels the way it should.
Automatically Sanitizes Your Spa
Set it and forget it. The XL30-U works continuously to keep your water clean without requiring ongoing manual intervention.
Destroys What Chlorine Can't
Ozone kills chlorine-tolerant parasites like Cryptosporidium and Giardia — microorganisms that standard chemical treatments often miss.
Eliminates Bacteria, Viruses, and Biofilm
The XL30-U attacks bacteria, viruses, mold, and biofilm at the source, providing a deeper level of sanitation than chemicals alone.
Reduces Chlorine and Bromine Use
By doing more of the heavy lifting, the XL30-U lets you cut back significantly on chlorine and bromine — making the water gentler on your skin and eyes.
Environmentally Safe
After ozone does its job, it breaks down into pure oxygen. No harmful byproducts. No residue. Just clean water.
Product Specifications
Specification
Details
Product Name
Spa Ozonator XL30-U
SKU / Part Number
SPA/XL30UL/U03
Power Supply
120V / 240V
Shipping Dimensions
3 × 5 × 5.5 in
Shipping Weight
1.05 lbs
Includes
Check valve and AMP cord
Hot Tubs and Spas That Use the XL30-U
The Spa Ozonator XL30-U is a widely used sanitation component across many popular hot tub brands. It is commonly found in spas equipped with the following control systems and manufactured by the following brands:
Compatible Spa Brands (models may vary by year):
Strong Spas
AquaRest Spas / Dream Maker Spas
Coleman Spas
Maax Spas
Cal Spas
Dynasty Spas
Artesian Spas
Marquis Spas
Sundance Spas
Jacuzzi Spas
Master Spas
Vita Spas
Caldera Spas
Dimension One Spas
Compatible Control Systems Include:
Balboa control systems
Gecko control systems
HydroQuip control systems
ACC control systems
Waterway control systems
Watkins / Caldera control systems
Not sure if the XL30-U fits your spa? Check your part number if known, or send us your spa's make, model, and serial number at fixmytub@gmail.com and we'll confirm compatibility before you order.
How It Works
1. Install the Ozonator
The XL30-U connects directly to your spa's existing ozone port using the included AMP cord and check valve. Factory installation is also available on select new spa models.
2. Ozone Gets to Work
Once installed, the unit automatically generates ozone and introduces it into your spa water, where it instantly neutralizes contaminants, bacteria, and organic matter.
3. Enjoy Cleaner, Clearer Water
With the XL30-U running in the background, you'll notice a visible improvement in your water quality — and a reduced need for chlorine or bromine top-ups.
Frequently Asked Questions
What does the Spa Ozonator XL30-U do?
The XL30-U generates ozone — a natural, highly effective oxidizer — that automatically sanitizes your spa water. It destroys bacteria, viruses, mold, biofilm, and chlorine-tolerant parasites like Cryptosporidium and Giardia, while also reducing the amount of chlorine or bromine needed to maintain safe water chemistry.
Is the XL30-U compatible with my hot tub?
The XL30-U is compatible with a wide range of hot tub brands and control systems, including Balboa, Gecko, HydroQuip, and many more. If you're not sure whether this ozonator fits your spa, email us at fixmytub@gmail.com with your spa's make, model, and serial number — or call us at 1-855-248-0777. You can also send photos of your current unit and we'll help you identify the right replacement.
What's included with the XL30-U?
The unit ships with a check valve and AMP cord. Shipping dimensions are 3 × 5 × 5.5 in, and the package weighs 1.05 lbs.
Does the XL30-U work on both 120V and 240V spas?
Yes. The XL30-U is designed for both 120V and 240V power supplies, making it compatible with the vast majority of residential hot tubs across North America.
I can't find my part number — can you still help?
Absolutely. Hard-to-find parts are our specialty. Email us a photo of your current ozonator along with your spa's make, model, and serial number to fixmytub@gmail.com, and our team will help you track down the right part.
Does Western Tub and Pool offer installation support?
Yes. Our team offers free home tutorials and assistance with spa, hot tub, and pool maintenance. Whether you need guidance on installing the XL30-U or diagnosing a water care issue, we're here to help.
Get Your XL30-U from Western Tub and Pool
Running cloudy water, mystery odors, or a failed ozonator? The XL30-U is a proven, affordable fix that gets your spa back to its best. At just $69.99, it's one of the most cost-effective upgrades you can make for your hot tub's sanitation system.
Shop and order at Western Tub and Pool — and get the right part the first time.
[Order Now — $69.99] [Browse Our Full Parts Catalogue]
Need help finding the right part?
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
Send us your part number, photos, or your spa's make, model, and serial number — and we'll take it from there.](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4206/6248/XL30UL-U03-02-3__21149.1773525743.jpg?c=2 "Spa Ozonator XL30-U — Cleaner Water, Zero Hassle
Stop fighting cloudy, chemical-heavy spa water. The Spa Ozonator XL30-U is a powerful, low-maintenance sanitation solution that automatically keeps your hot tub water clean, clear, and comfortable — all without harsh chemical overload.
SKU: SPA/XL30UL/U03
Price: $69.99
Shop and order at Western Tub and Pool.
[Order Now] [Call Us: 1-855-248-0777]
Why Your Spa Needs the XL30-U Ozonator
Your hot tub deserves more than a chemical cocktail. The XL30-U produces pure ozone — nature's most powerful oxidizer — that destroys organic and inorganic contaminants the moment it makes contact. The result? Fresher water, softer skin, and a spa experience that feels the way it should.
Automatically Sanitizes Your Spa
Set it and forget it. The XL30-U works continuously to keep your water clean without requiring ongoing manual intervention.
Destroys What Chlorine Can't
Ozone kills chlorine-tolerant parasites like Cryptosporidium and Giardia — microorganisms that standard chemical treatments often miss.
Eliminates Bacteria, Viruses, and Biofilm
The XL30-U attacks bacteria, viruses, mold, and biofilm at the source, providing a deeper level of sanitation than chemicals alone.
Reduces Chlorine and Bromine Use
By doing more of the heavy lifting, the XL30-U lets you cut back significantly on chlorine and bromine — making the water gentler on your skin and eyes.
Environmentally Safe
After ozone does its job, it breaks down into pure oxygen. No harmful byproducts. No residue. Just clean water.
Product Specifications
Specification
Details
Product Name
Spa Ozonator XL30-U
SKU / Part Number
SPA/XL30UL/U03
Power Supply
120V / 240V
Shipping Dimensions
3 × 5 × 5.5 in
Shipping Weight
1.05 lbs
Includes
Check valve and AMP cord
Hot Tubs and Spas That Use the XL30-U
The Spa Ozonator XL30-U is a widely used sanitation component across many popular hot tub brands. It is commonly found in spas equipped with the following control systems and manufactured by the following brands:
Compatible Spa Brands (models may vary by year):
Strong Spas
AquaRest Spas / Dream Maker Spas
Coleman Spas
Maax Spas
Cal Spas
Dynasty Spas
Artesian Spas
Marquis Spas
Sundance Spas
Jacuzzi Spas
Master Spas
Vita Spas
Caldera Spas
Dimension One Spas
Compatible Control Systems Include:
Balboa control systems
Gecko control systems
HydroQuip control systems
ACC control systems
Waterway control systems
Watkins / Caldera control systems
Not sure if the XL30-U fits your spa? Check your part number if known, or send us your spa's make, model, and serial number at fixmytub@gmail.com and we'll confirm compatibility before you order.
How It Works
1. Install the Ozonator
The XL30-U connects directly to your spa's existing ozone port using the included AMP cord and check valve. Factory installation is also available on select new spa models.
2. Ozone Gets to Work
Once installed, the unit automatically generates ozone and introduces it into your spa water, where it instantly neutralizes contaminants, bacteria, and organic matter.
3. Enjoy Cleaner, Clearer Water
With the XL30-U running in the background, you'll notice a visible improvement in your water quality — and a reduced need for chlorine or bromine top-ups.
Frequently Asked Questions
What does the Spa Ozonator XL30-U do?
The XL30-U generates ozone — a natural, highly effective oxidizer — that automatically sanitizes your spa water. It destroys bacteria, viruses, mold, biofilm, and chlorine-tolerant parasites like Cryptosporidium and Giardia, while also reducing the amount of chlorine or bromine needed to maintain safe water chemistry.
Is the XL30-U compatible with my hot tub?
The XL30-U is compatible with a wide range of hot tub brands and control systems, including Balboa, Gecko, HydroQuip, and many more. If you're not sure whether this ozonator fits your spa, email us at fixmytub@gmail.com with your spa's make, model, and serial number — or call us at 1-855-248-0777. You can also send photos of your current unit and we'll help you identify the right replacement.
What's included with the XL30-U?
The unit ships with a check valve and AMP cord. Shipping dimensions are 3 × 5 × 5.5 in, and the package weighs 1.05 lbs.
Does the XL30-U work on both 120V and 240V spas?
Yes. The XL30-U is designed for both 120V and 240V power supplies, making it compatible with the vast majority of residential hot tubs across North America.
I can't find my part number — can you still help?
Absolutely. Hard-to-find parts are our specialty. Email us a photo of your current ozonator along with your spa's make, model, and serial number to fixmytub@gmail.com, and our team will help you track down the right part.
Does Western Tub and Pool offer installation support?
Yes. Our team offers free home tutorials and assistance with spa, hot tub, and pool maintenance. Whether you need guidance on installing the XL30-U or diagnosing a water care issue, we're here to help.
Get Your XL30-U from Western Tub and Pool
Running cloudy water, mystery odors, or a failed ozonator? The XL30-U is a proven, affordable fix that gets your spa back to its best. At just $69.99, it's one of the most cost-effective upgrades you can make for your hot tub's sanitation system.
Shop and order at Western Tub and Pool — and get the right part the first time.
[Order Now — $69.99] [Browse Our Full Parts Catalogue]
Need help finding the right part?
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
Send us your part number, photos, or your spa's make, model, and serial number — and we'll take it from there.")
![Hot Tub Ozonator Check Valve — Replacement Spa Part
Keep your ozone system running the way it should. The ozonator check valve is a small but critical component that prevents water from flowing back into your ozonator unit — protecting it from damage and keeping your spa water clean and sanitized.
If your ozonator has stopped working, or you've noticed water backing up into the ozone line, a worn or failed check valve is often the culprit. The good news? It's one of the easier repairs you can make.
Shop and order at Western Tub and Pool.
[Call us at 1-855-248-0777] [Email: fixmytub@gmail.com]
What Is an Ozonator Check Valve?
An ozonator check valve is a one-way flow valve installed in the ozone supply line between your ozonator unit and the spa's plumbing. It allows ozone gas to flow into the water, while preventing water from travelling back up the tubing and into the ozonator — which can cause serious and costly damage to the unit.
Over time, check valves degrade due to constant exposure to ozone, heat, and water chemistry. Replacing a faulty check valve is one of the most common hot tub ozone system repairs.
Product Specifications
Connection Type: Barbed hose fittings
Common Sizes Available: 1/4" barb x 1/4" barb | 1/4" HB x 3/8" HB
Inlet/Outlet: Typically 3/8" barb
Weight: Approximately 0.10 lbs
Material: Ozone-resistant construction (Viton seal options available)
Kit Options: Available as a standalone valve or as part of a kit including up to 10 feet of ozone-rated tubing
Common Part Numbers: 9-0770-01, X278200, DIM01510-224 (confirm your part number before ordering — see below)
Not sure which size you need? Check your existing tubing diameter or the ozonator manufacturer's specifications. When in doubt, call us — we're happy to help you identify the right part.
Compatible Ozonator Brands & Hot Tub Models
This ozonator check valve is compatible with a wide range of hot tub brands and ozone systems. Compatibility depends on your specific ozonator unit and tubing size.
Compatible Ozonator Systems (Common)
Del Ozone (all models, including APG/CMP types)
Aquanova Ozonators
AquaSun Ozonators
Clearwater Ozonators
HydroQuip / Water Pro+ Ozonator systems
CMP (Custom Molded Products) ozonators
Hot Tub & Spa Brands Commonly Using Ozonator Check Valves
Artesian Spas
Beachcomber Hot Tubs
Cal Spas
Caldera Spas
Coast Spas
Coleman Spas
Dimension One Spas
Dynasty Spas
Hot Spring Spas (select models)
Jacuzzi Hot Tubs
LA Spas
Marquis Spas
Master Spas
PDC Spas
Saratoga Spas
Sundance Spas
Vita Spas
Waterway-equipped spas
And many more
Important: Check valve sizing varies by model and ozonator brand. Always verify your tubing diameter (1/4" or 3/8") and the connection type before ordering. If you're unsure, send us your hot tub's make, model, serial number, or a photo of the existing part — and we'll match it for you.
Why Replace Your Ozonator Check Valve?
A failing check valve can cause more than just ozone system issues. Here's what to watch for:
Water backing up into the ozonator — the most common sign of a failed valve
Ozonator unit making unusual sounds or failing prematurely
Reduced or no ozone output, leading to poor water sanitization
Visible cracking, discoloration, or deformation of the existing valve body
Ozone tubing that feels soft, brittle, or is leaking
Replacing the check valve promptly protects your ozonator and ensures your water stays clean with minimal chemical use.
How It Works — Easy Installation
Step 1: Turn off your spa
Switch off power at the breaker before accessing any internal components.
Step 2: Locate the ozone check valve
The check valve sits in the ozone supply line, typically between the ozonator unit and the injection point in your spa's plumbing.
Step 3: Remove the old valve
Loosen the hose clamps or pull free the barbed connections and remove the old check valve. Note the direction of the arrow on the valve body — this indicates flow direction.
Step 4: Install the new valve
Insert the new check valve with the arrow pointing toward the spa (away from the ozonator). Secure the tubing connections and replace any clamps.
Step 5: Restore power and test
Turn the spa back on and confirm the ozonator is functioning normally. Check for any leaks at the connection points.
Need help? Western Tub and Pool offers free home tutorials and support. Call us at 1-855-248-0777 and one of our spa repair specialists will walk you through the process.
Frequently Asked Questions
How do I know if my ozonator check valve needs replacing?
The most obvious sign is water inside the ozonator unit, which happens when the check valve fails and allows water to flow backward through the ozone line. You may also notice reduced water quality or an ozonator that no longer functions. Visible cracking or discoloration of the valve body is another clear indicator.
What size check valve do I need?
The most common sizes for hot tub ozonators are 1/4" x 1/4" barb and 1/4" x 3/8" barb. Check your current tubing diameter or ozonator manual to confirm the right fit. If you're unsure, send us a photo, your spa's make and model, and your serial number — we'll identify the correct part for you.
Can I use any check valve, or does it need to be ozone-rated?
It must be ozone-rated. Standard PVC check valves will degrade quickly when exposed to ozone gas. Look for valves with Viton seals or materials specifically rated for ozone compatibility.
Do you carry replacement kits that include tubing?
Yes. In addition to standalone check valves, we carry kits that include the valve plus ozone-rated tubing (typically up to 10 feet), making it easy to replace the entire ozone supply line in one go.
I can't find my part number — can you still help?
Absolutely. This is a hard-to-find part for many spa owners. Send us an email at fixmytub@gmail.com with a photo of the existing valve, your spa's make, model, and serial number, and we'll track down the right replacement for you.
How long does shipping take?
We ship quickly to get your spa back up and running as soon as possible. Contact us for current availability and shipping options for your location.
Can't Find Your Part? We Can Help.
Ozonator check valves can be tricky to identify — especially on older or discontinued spa models. At Western Tub and Pool, we specialize in hard-to-find hot tub and spa parts. If you know your part number, great. If not, we'll figure it out together.
Here's what to have ready when you contact us:
Your spa's make and model
Your spa's serial number
Your ozonator brand (if known)
Your tubing diameter (1/4" or 3/8")
A photo of the existing valve, if possible
Shop and order at Western Tub and Pool.
[Call us: 1-855-248-0777] [Email: fixmytub@gmail.com] [Browse our online catalogue]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4208/6253/SPA_BI21626__27999.1773527436.jpg?c=2 "Hot Tub Ozonator Check Valve — Replacement Spa Part
Keep your ozone system running the way it should. The ozonator check valve is a small but critical component that prevents water from flowing back into your ozonator unit — protecting it from damage and keeping your spa water clean and sanitized.
If your ozonator has stopped working, or you've noticed water backing up into the ozone line, a worn or failed check valve is often the culprit. The good news? It's one of the easier repairs you can make.
Shop and order at Western Tub and Pool.
[Call us at 1-855-248-0777] [Email: fixmytub@gmail.com]
What Is an Ozonator Check Valve?
An ozonator check valve is a one-way flow valve installed in the ozone supply line between your ozonator unit and the spa's plumbing. It allows ozone gas to flow into the water, while preventing water from travelling back up the tubing and into the ozonator — which can cause serious and costly damage to the unit.
Over time, check valves degrade due to constant exposure to ozone, heat, and water chemistry. Replacing a faulty check valve is one of the most common hot tub ozone system repairs.
Product Specifications
Connection Type: Barbed hose fittings
Common Sizes Available: 1/4\" barb x 1/4\" barb | 1/4\" HB x 3/8\" HB
Inlet/Outlet: Typically 3/8\" barb
Weight: Approximately 0.10 lbs
Material: Ozone-resistant construction (Viton seal options available)
Kit Options: Available as a standalone valve or as part of a kit including up to 10 feet of ozone-rated tubing
Common Part Numbers: 9-0770-01, X278200, DIM01510-224 (confirm your part number before ordering — see below)
Not sure which size you need? Check your existing tubing diameter or the ozonator manufacturer's specifications. When in doubt, call us — we're happy to help you identify the right part.
Compatible Ozonator Brands & Hot Tub Models
This ozonator check valve is compatible with a wide range of hot tub brands and ozone systems. Compatibility depends on your specific ozonator unit and tubing size.
Compatible Ozonator Systems (Common)
Del Ozone (all models, including APG/CMP types)
Aquanova Ozonators
AquaSun Ozonators
Clearwater Ozonators
HydroQuip / Water Pro+ Ozonator systems
CMP (Custom Molded Products) ozonators
Hot Tub & Spa Brands Commonly Using Ozonator Check Valves
Artesian Spas
Beachcomber Hot Tubs
Cal Spas
Caldera Spas
Coast Spas
Coleman Spas
Dimension One Spas
Dynasty Spas
Hot Spring Spas (select models)
Jacuzzi Hot Tubs
LA Spas
Marquis Spas
Master Spas
PDC Spas
Saratoga Spas
Sundance Spas
Vita Spas
Waterway-equipped spas
And many more
Important: Check valve sizing varies by model and ozonator brand. Always verify your tubing diameter (1/4\" or 3/8\") and the connection type before ordering. If you're unsure, send us your hot tub's make, model, serial number, or a photo of the existing part — and we'll match it for you.
Why Replace Your Ozonator Check Valve?
A failing check valve can cause more than just ozone system issues. Here's what to watch for:
Water backing up into the ozonator — the most common sign of a failed valve
Ozonator unit making unusual sounds or failing prematurely
Reduced or no ozone output, leading to poor water sanitization
Visible cracking, discoloration, or deformation of the existing valve body
Ozone tubing that feels soft, brittle, or is leaking
Replacing the check valve promptly protects your ozonator and ensures your water stays clean with minimal chemical use.
How It Works — Easy Installation
Step 1: Turn off your spa
Switch off power at the breaker before accessing any internal components.
Step 2: Locate the ozone check valve
The check valve sits in the ozone supply line, typically between the ozonator unit and the injection point in your spa's plumbing.
Step 3: Remove the old valve
Loosen the hose clamps or pull free the barbed connections and remove the old check valve. Note the direction of the arrow on the valve body — this indicates flow direction.
Step 4: Install the new valve
Insert the new check valve with the arrow pointing toward the spa (away from the ozonator). Secure the tubing connections and replace any clamps.
Step 5: Restore power and test
Turn the spa back on and confirm the ozonator is functioning normally. Check for any leaks at the connection points.
Need help? Western Tub and Pool offers free home tutorials and support. Call us at 1-855-248-0777 and one of our spa repair specialists will walk you through the process.
Frequently Asked Questions
How do I know if my ozonator check valve needs replacing?
The most obvious sign is water inside the ozonator unit, which happens when the check valve fails and allows water to flow backward through the ozone line. You may also notice reduced water quality or an ozonator that no longer functions. Visible cracking or discoloration of the valve body is another clear indicator.
What size check valve do I need?
The most common sizes for hot tub ozonators are 1/4\" x 1/4\" barb and 1/4\" x 3/8\" barb. Check your current tubing diameter or ozonator manual to confirm the right fit. If you're unsure, send us a photo, your spa's make and model, and your serial number — we'll identify the correct part for you.
Can I use any check valve, or does it need to be ozone-rated?
It must be ozone-rated. Standard PVC check valves will degrade quickly when exposed to ozone gas. Look for valves with Viton seals or materials specifically rated for ozone compatibility.
Do you carry replacement kits that include tubing?
Yes. In addition to standalone check valves, we carry kits that include the valve plus ozone-rated tubing (typically up to 10 feet), making it easy to replace the entire ozone supply line in one go.
I can't find my part number — can you still help?
Absolutely. This is a hard-to-find part for many spa owners. Send us an email at fixmytub@gmail.com with a photo of the existing valve, your spa's make, model, and serial number, and we'll track down the right replacement for you.
How long does shipping take?
We ship quickly to get your spa back up and running as soon as possible. Contact us for current availability and shipping options for your location.
Can't Find Your Part? We Can Help.
Ozonator check valves can be tricky to identify — especially on older or discontinued spa models. At Western Tub and Pool, we specialize in hard-to-find hot tub and spa parts. If you know your part number, great. If not, we'll figure it out together.
Here's what to have ready when you contact us:
Your spa's make and model
Your spa's serial number
Your ozonator brand (if known)
Your tubing diameter (1/4\" or 3/8\")
A photo of the existing valve, if possible
Shop and order at Western Tub and Pool.
[Call us: 1-855-248-0777] [Email: fixmytub@gmail.com] [Browse our online catalogue]")
