Canadian Dollars
US Dollar
Euro
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/397/774/1031__84786.1771396363.png?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/397/2030/_75436_37025_ACC01401031__57801.1771396365.jpg?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/397/2031/_75436_37024_ACC01401031__13718.1771396367.jpg?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/397/774/1031__84786.1771396363.png?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/397/2030/_75436_37025_ACC01401031__57801.1771396365.jpg?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/397/2031/_75436_37024_ACC01401031__13718.1771396367.jpg?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
Product Description
Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
- Width: 11 inches
- Height: 5.5 inches (approx. 6 inches at widest point)
- Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
- Color: Black
- Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
- ACC01401030 (Previous Grey/Silver versions)
- ACC01400911
- ACC01400910
- ACC01401866
- ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email:fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]
![Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas "Cascade" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/397/774/1031__84786.1771396363.png?c=2 "Restore your relaxation with the perfect fit
Replace your worn-out headrest with the genuine Cal Spas Black Cascade Pillow (ACC014010w31). Designed for comfort and durability, it’s the exact match your spa needs.
[Order your replacement pillow at Western Tub and Pool ]
Genuine comfort, guaranteed fit
Don't settle for generic parts that don't quite fit. The Cal Spas Black Cascade Pillow is an OEM (Original Equipment Manufacturer) replacement, ensuring it snaps perfectly into place and restores the sleek look of your hot tub.
Durable Design
Crafted from high-quality, water-resistant materials, this pillow is built to withstand the humid environment of your spa and resist chemical wear.
Ergonomic Support
Designed with the signature Cascade contour, this headrest provides the neck support you need to fully unwind after a long day.
Fresh New Look
Over time, pillows can fade or crack. Swapping in a fresh black pillow instantly revitalizes the appearance of your entire spa setup.
Technical Specifications
Before you buy, double-check these measurements against your current pillow to ensure a perfect match.
Dimensions:
Width: 11 inches
Height: 5.5 inches (approx. 6 inches at widest point)
Pin-to-Pin Spacing: 8 3/4 inches (approx. 215 mm) between center of pins
Color: Black
Weight: Approx. 2.00 lbs
Note: This part is the pillow cushion only. It does not include the logo insert dome.
Compatibility and Model List
This pillow is specifically designed for Cal Spas \"Cascade\" series hot tubs. It is widely used on models manufactured between 2008 and 2019.
Replaces the following part numbers:
ACC01401030 (Previous Grey/Silver versions)
ACC01400911
ACC01400910
ACC01401866
ACC01401863
Important Fitment Note:
This pillow typically uses grey pins on the back. If your spa is a 2020 model or newer, you likely require a different version with black pins. Please check your existing hardware before ordering.
Struggling to find the right part?
We know that identifying the exact part for older hot tubs can be frustrating. If you aren't sure if this is the right pillow for you, we are here to help.
Send us a photo!
The easiest way to confirm compatibility is to show us what you have. Email us pictures of your current pillow (front and back) and your spa's serial number if available.
Email: fixmytub@gmail.com
Subject: Western Tub and Pool Parts Assistance
Frequently Asked Questions
Does this pillow come with the Cal Spas logo insert?
No, this product is the pillow cushion only (ACC014010w31). The logo dome insert is sold separately. If your old insert is in good condition, you may be able to transfer it to the new pillow.
How do I install this pillow?
Installation is simple. The pillow features two pins on the back that snap directly into the receptacles on your spa shell. No tools are typically required—just align the pins and apply firm pressure.
My old pillow was grey. Will this black one fit?
Yes! This black version is the official replacement for the discontinued grey/silver Cascade pillows (Part #ACC01401030). It fits the same mounting points but offers a more modern look that hides wear better.
Do you offer help with other maintenance issues?
Absolutely. At Western Tub and Pool, we believe water care is crucial for your comfort and safety. We offer free home tutorials to discuss the intricacies of your spa, hot tub, or pool maintenance.
Get back to soaking in style
Don't let a broken headrest ruin your relaxation. Order your genuine Cal Spas replacement today.
[Add to Cart at Western Tub and Pool ]")
