Canadian Dollars
US Dollar
Euro
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/376/752/882_grey__21301.1771397878.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/376/6106/Calspa_pillow_Quad_Blaster_Smooth_Surface_Complete_Gray_western_tub_and_pools__62819.1771398175.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/376/6107/Calspa_pillow_Quad_Blaster_Smooth_Surface_Complete_Gray_western_tub_and_pool___72543.1771398178.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/376/752/882_grey__21301.1771397878.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/376/6106/Calspa_pillow_Quad_Blaster_Smooth_Surface_Complete_Gray_western_tub_and_pools__62819.1771398175.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/376/6107/Calspa_pillow_Quad_Blaster_Smooth_Surface_Complete_Gray_western_tub_and_pool___72543.1771398178.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
Product Description
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
- Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.- Part Number: ACC01400882
- Verification Number: Often stamped with #1379 on the back.
- Color: Gray / Dark Gray
- Dimensions: Approximately 9.5" x 4"
- Mounting: 2 Pins on the back
- Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
- Cal Spas 2003 Models
- Cal Spas 2004 Models
- Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
- Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
- Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
- Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
Add to Cart at Western Tub and pool
- ACC01400882
- Color: Gray / Dark Gray
- Dimensions: Approximately 9.5" x 4"
- Mounting: 2 Pins on the back
- Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
- Cal Spas 2003 Models
- Cal Spas 2004 Models
- Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
- Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
- Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
- Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
![Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and "Quad Blaster" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5" x 4"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75" to 7" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this "Quad Blaster" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the "Neck Blaster" and "Quad Blaster" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number "1379" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to "pop" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when "shocking" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/376/752/882_grey__21301.1771397878.png?c=2 "Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Part Number:
Relax in style again
Over time, hot tub pillows can fade, crack, or absorb water, ruining the look and feel of your spa. The Cal Spas Pillow Quad Blaster Smooth Surface Complete (Gray) is the direct replacement you need to bring your hot tub back to its original glory.
Designed specifically for Cal Spas models, this pillow snaps easily into place so you can get back to relaxing immediately.
Why choose this replacement pillow?
Genuine Cal Spas Quality
Don't settle for generic knock-offs. This is a high-quality, authentic replacement part designed to withstand the heat and chemistry of your spa environment.
Perfect Fit & Finish
Featuring the classic smooth surface and \"Quad Blaster\" design, this gray pillow matches the original aesthetic of your spa.
Easy Installation
No tools required. Simply line up the pins and snap the pillow into your existing spa shell for a secure fit.
Product Specifications
Ensure this is the right match for your tub by checking these details:
Verification Number: Often stamped with #1379 on the back.
Part Number: ACC01400882
Verification Number: Often stamped with #1379 on the back.
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]
Color: Gray / Dark Gray
Dimensions: Approximately 9.5\" x 4\"
Mounting: 2 Pins on the back
Pin-to-Pin Distance: Approximately 6.75\" to 7\" (Measure the distance between the center of the pins on your old pillow to confirm).
Compatibility Guide
This pillow is a common replacement for many 2003 and later Cal Spas models.
While a complete list of every specific model year is extensive, this \"Quad Blaster\" style is frequently found in:
Cal Spas 2003 Models
Cal Spas 2004 Models
Select models from the \"Neck Blaster\" and \"Quad Blaster\" series.
Note: Spa manufacturers often change pillow designs mid-year. The best way to guarantee a fit is to match the visual design, dimensions, and pin spacing of your current pillow.
Hard-to-find part assistance
Not sure if this is the right part? We specialize in tracking down hard-to-find hot tub components.
Check your part number: Look for a 3 or 4-digit number stamped on the back of your old pillow.
Send us photos: Email clear pictures of the front and back of your current pillow to fixmytub@gmail.com.
Browse our catalog: Search our full online catalog for more Cal Spas options.
Frequently Asked Questions
How do I know if this pillow fits my hot tub?
The most reliable method is to measure your existing pillow. Check that the width is roughly 9.5 inches and, most importantly, measure the distance between the two pins on the back. It should be between 6.75 and 7 inches. You should also look for the number \"1379\" stamped on the back rubber.
Do I need any tools to install this?
No tools are needed! These pillows are designed to \"pop\" into place. You may need to apply firm pressure to snap the pins into the receptors on your spa shell.
How can I make my new pillows last longer?
To extend the life of your pillows, keep your water chemistry balanced. Excessive chlorine or bromine can cause the material to deteriorate. We also recommend removing pillows when \"shocking\" the water and leaving the cover open for at least 30 minutes to let chemical vapors escape.
What if I can't find my model number?
If you are unsure, please don't guess! Send us an email at fixmytub@gmail.com with photos of your spa and the old pillow. Our experts will help identify the correct replacement.
Get your hot tub looking new again
[Add to Cart at Western Tub and pool ]")
