Canadian Dollars
US Dollar
Euro
![CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
Dream Series: Dream Star, Riviera, Stargazer, Mystic
Star Series: Scorpio and other Star Series plug-and-play models
Performance Series: Standard performance models without air blowers
Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
Balboa-based systems (including Dream Star and Q2000 spa packs)
Gecko-based systems (including Wave Max configurations)
Various QCA topside control panels
Cross-reference numbers
Part Number: 25241-350-100
Manufacturer Part Number (MPN): 25241-000-100
Dimensions
Fixture diameter: 5 inches
Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
25241-350-000 – SQR 5" Spa Light (Lens, Reflector only); Clear
25241-352-000 – SQR 5" Spa Light (Lens, Reflector only); Clear/Stainless Steel
25241-352-100 – SQR 5" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
25241-350-001 – SQR Replacement Grommet (White), for 5" Spa Light
25241-330-100 – SQR 3" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
U – USA
C – Canada
E – Europe
A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4582/6860/CMP_lighting__26421.1789591673.PNG?c=2 "CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
Dream Series: Dream Star, Riviera, Stargazer, Mystic
Star Series: Scorpio and other Star Series plug-and-play models
Performance Series: Standard performance models without air blowers
Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
Balboa-based systems (including Dream Star and Q2000 spa packs)
Gecko-based systems (including Wave Max configurations)
Various QCA topside control panels
Cross-reference numbers
Part Number: 25241-350-100
Manufacturer Part Number (MPN): 25241-000-100
Dimensions
Fixture diameter: 5 inches
Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
25241-350-000 – SQR 5\" Spa Light (Lens, Reflector only); Clear
25241-352-000 – SQR 5\" Spa Light (Lens, Reflector only); Clear/Stainless Steel
25241-352-100 – SQR 5\" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
25241-350-001 – SQR Replacement Grommet (White), for 5\" Spa Light
25241-330-100 – SQR 3\" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
U – USA
C – Canada
E – Europe
A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.")
![CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
Dream Series: Dream Star, Riviera, Stargazer, Mystic
Star Series: Scorpio and other Star Series plug-and-play models
Performance Series: Standard performance models without air blowers
Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
Balboa-based systems (including Dream Star and Q2000 spa packs)
Gecko-based systems (including Wave Max configurations)
Various QCA topside control panels
Cross-reference numbers
Part Number: 25241-350-100
Manufacturer Part Number (MPN): 25241-000-100
Dimensions
Fixture diameter: 5 inches
Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
25241-350-000 – SQR 5" Spa Light (Lens, Reflector only); Clear
25241-352-000 – SQR 5" Spa Light (Lens, Reflector only); Clear/Stainless Steel
25241-352-100 – SQR 5" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
25241-350-001 – SQR Replacement Grommet (White), for 5" Spa Light
25241-330-100 – SQR 3" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
U – USA
C – Canada
E – Europe
A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4582/6860/CMP_lighting__26421.1789591673.PNG?c=2 "CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
Dream Series: Dream Star, Riviera, Stargazer, Mystic
Star Series: Scorpio and other Star Series plug-and-play models
Performance Series: Standard performance models without air blowers
Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
Balboa-based systems (including Dream Star and Q2000 spa packs)
Gecko-based systems (including Wave Max configurations)
Various QCA topside control panels
Cross-reference numbers
Part Number: 25241-350-100
Manufacturer Part Number (MPN): 25241-000-100
Dimensions
Fixture diameter: 5 inches
Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
25241-350-000 – SQR 5\" Spa Light (Lens, Reflector only); Clear
25241-352-000 – SQR 5\" Spa Light (Lens, Reflector only); Clear/Stainless Steel
25241-352-100 – SQR 5\" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
25241-350-001 – SQR Replacement Grommet (White), for 5\" Spa Light
25241-330-100 – SQR 3\" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
U – USA
C – Canada
E – Europe
A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.")
Product Description
CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
- Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
- Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
- CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
- 5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
- Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
- Dream Series: Dream Star, Riviera, Stargazer, Mystic
- Star Series: Scorpio and other Star Series plug-and-play models
- Performance Series: Standard performance models without air blowers
- Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
- Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
- Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
- Balboa-based systems (including Dream Star and Q2000 spa packs)
- Gecko-based systems (including Wave Max configurations)
- Various QCA topside control panels
Cross-reference numbers
- Part Number: 25241-350-100
- Manufacturer Part Number (MPN): 25241-000-100
Dimensions
- Fixture diameter: 5 inches
- Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
- 25241-350-000 – SQR 5" Spa Light (Lens, Reflector only); Clear
- 25241-352-000 – SQR 5" Spa Light (Lens, Reflector only); Clear/Stainless Steel
- 25241-352-100 – SQR 5" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
- 25241-350-001 – SQR Replacement Grommet (White), for 5" Spa Light
- 25241-330-100 – SQR 3" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
- U – USA
- C – Canada
- E – Europe
- A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.
![CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
Dream Series: Dream Star, Riviera, Stargazer, Mystic
Star Series: Scorpio and other Star Series plug-and-play models
Performance Series: Standard performance models without air blowers
Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
Balboa-based systems (including Dream Star and Q2000 spa packs)
Gecko-based systems (including Wave Max configurations)
Various QCA topside control panels
Cross-reference numbers
Part Number: 25241-350-100
Manufacturer Part Number (MPN): 25241-000-100
Dimensions
Fixture diameter: 5 inches
Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
25241-350-000 – SQR 5" Spa Light (Lens, Reflector only); Clear
25241-352-000 – SQR 5" Spa Light (Lens, Reflector only); Clear/Stainless Steel
25241-352-100 – SQR 5" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
25241-350-001 – SQR Replacement Grommet (White), for 5" Spa Light
25241-330-100 – SQR 3" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
U – USA
C – Canada
E – Europe
A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4582/6860/CMP_lighting__26421.1789591673.PNG?c=2 "CMP 5 Inch Light Kit 25241-350-100 SQR QCA
Light up your soak with a genuine CMP SQR spa light kit — the simple, reliable replacement built for QCA Spas and other leading hot tub brands.
[Shop and order at Western Tub and Pool]
Why hot tub owners choose this light kit
Your spa's light kit does more than look pretty after dark — it's a sealed, safety-rated fixture that has to stand up to constant water exposure. When it fails or fogs up, replacing it with the exact factory part matters. Here's what makes the CMP 25241-350-100 a smart pick:
Complete kit, ready to install: Includes the lens, reflector, bulb, and wiring harness — everything you need, nothing extra to source.
Clear lens design: Delivers a bright, clean glow that highlights your spa's water at night.
CMP's SQR sealing system: No gaskets, glue, silicone, or wingnuts required. The lens pushes directly into a polymer grommet for a tight radial seal, so installation is fast and leaks are far less likely.
5-inch diameter fixture: Fits a standard 3 ¾ inch mounting hole.
Backed by a manufacturer's limited warranty: Buy with confidence knowing this part is built to CMP's quality standard.
Hot tubs and models that use this light kit
This CMP SQR 5 inch light kit is used across QCA Spas' full model lineup, as well as select other hot tub brands. If your spa falls into one of the series below, this part is worth checking against your current light fixture:
Dream Series: Dream Star, Riviera, Stargazer, Mystic
Star Series: Scorpio and other Star Series plug-and-play models
Performance Series: Standard performance models without air blowers
Jewel Series: Amethyst, Ruby, Topaz, Moonstone, Moonstone Deluxe
Majestic Series: St. Maarten, Grand Bahama, Grand Cayman, Tuscan River Falls
Paradise Series: Models featuring the Ultra Wave Lounger and Wave Max Seat
Not seeing your exact model? Spa manufacturers often update pillows, panels, and light fixtures over time — even within the same model name. Don't guess. Check your part number or send us a photo, and we'll confirm the fit.
Compatible controls
This light kit commonly pairs with spa packs and control systems, including:
Balboa-based systems (including Dream Star and Q2000 spa packs)
Gecko-based systems (including Wave Max configurations)
Various QCA topside control panels
Cross-reference numbers
Part Number: 25241-350-100
Manufacturer Part Number (MPN): 25241-000-100
Dimensions
Fixture diameter: 5 inches
Mounting hole size required: 3 ¾ inches
Related replacement parts
Since your light kit is part of a bigger lighting system, it's worth checking these related CMP components too:
25241-350-000 – SQR 5\" Spa Light (Lens, Reflector only); Clear
25241-352-000 – SQR 5\" Spa Light (Lens, Reflector only); Clear/Stainless Steel
25241-352-100 – SQR 5\" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear/Stainless Steel
25241-350-001 – SQR Replacement Grommet (White), for 5\" Spa Light
25241-330-100 – SQR 3\" Spa Light Kit (Lens, Reflector, Bulb, Harness); Clear
Check our full online catalogue for these and other CMP lighting parts, or call us and we'll help you track down the right fit.
Frequently asked questions
How do I know if this light kit fits my hot tub?
Measure your existing light fixture — it should be 5 inches in diameter with a 3 ¾ inch mounting hole. If you're not sure, send us your spa's make, model, and serial number (or a photo of the current light) and we'll confirm the match for you.
Does this kit include everything I need to install it?
Yes. The 25241-350-100 kit includes the lens, reflector, bulb, and wiring harness. Thanks to CMP's SQR sealing system, no gaskets, glue, or silicone are needed for installation.
What's the difference between this kit and the 25241-350-000?
The 25241-350-100 is the complete kit, including the bulb and wiring harness. The 25241-350-000 includes only the lens and reflector, so it's best if you're replacing a cracked lens but keeping your existing bulb and wiring.
My hot tub isn't a QCA Spa. Will this part still fit?
This SQR-style light kit is used across several hot tub brands, not just QCA Spas. Send us your hot tub's make and model and we'll verify compatibility before you order.
What if I can't find my part number?
No problem. Email us a picture of the part, along with your hot tub's make, model, and serial number if available, and our team will identify the correct replacement for you.
Can't find the part you need?
Some hot tub parts are notoriously hard to track down — especially on older or discontinued models. If that's you, send us an email at fixmytub@gmail.com and we'll help you locate it.
As an international e-retailer, Western Tub and Pool stocks parts across multiple regional warehouses, which can affect shipping times and availability. To keep things clear, we mark each part's origin with a suffix:
U – USA
C – Canada
E – Europe
A – Asia
Note that some parts may be duplicated across regions under different suffixes. If you already know your part number, double-check the suffix before ordering. If you're not sure, send us a picture along with your hot tub's make, model, and serial number, and we'll match you with the correct part.
Shop and order at Western Tub and Pool
[Shop and order at Western Tub and Pool]
Questions? Call us at 1-855-248-0777 or email fixmytub@gmail.com.")
![Fix Your Spa with the CMP 5″ 500 Series SQR Jet Grommet
Stop leaks and restore your hot tub's performance with genuine replacement parts. We specialize in hard-to-find spa components to get you back to relaxing in no time.
[Shop Now at Western Tub and Pool]
Restore your relaxation
A worn-out grommet can lead to leaks and poor jet pressure, ruining your spa experience. The CMP 5″ 500 Series SQR Jet Grommet is the high-quality, durable solution you need.
Durable Construction
Crafted from high-grade Gray EPDM rubber, this grommet is designed to withstand the harsh chemical environment of hot tubs and provide a long-lasting seal.
Exact Fit for 500 Series
Designed specifically for the CMP 5″ 500 Series SQR assemblies, ensuring a precise fit that prevents leaks and restores original functionality.
Expert Support Availability
Don't guess when it comes to repairs. If you are struggling to identify your part, Western Tub and Pool offers dedicated assistance to ensure you buy the right component the first time.
Compatible with major hot tub brands
The CMP 5″ 500 Series SQR Jet Grommet is a versatile component used in the manufacturing of many popular spa models.
This part is frequently compatible with controls and systems found in:
CMP 500 Series Jet Assemblies
Various custom and major brand hot tubs utilizing SQR Jet bodies
Not sure if this fits your model?
Don't risk ordering the wrong part. Check your existing part number if known, or let our experts identify it for you.
Can't find the part you need? We can help.
At Western Tub and Pool, we specialize in hard-to-find hot tub repair parts. If you are unsure if this grommet is the correct replacement for your spa, we are here to assist.
How to get help:
Check your part number: Look for a number stamped on your old part.
Take a picture: Clear photos of the broken part help us identify the exact replacement.
Contact us: Email your part numbers and pictures to fixmytub@gmail.com or call us directly.
We will review your information and guide you to the exact replacement item from our extensive online catalog.
Frequently asked questions
How do I know if this grommet fits my hot tub?
This grommet is designed for the CMP 5″ 500 Series SQR Jet. If your current jet assembly matches this series, it will fit. We strongly recommend emailing us a picture of your current part to fixmytub@gmail.com so we can verify compatibility before you order.
What material is this grommet made of?
This replacement part is made of Gray EPDM (Ethylene Propylene Diene Monomer), a durable synthetic rubber known for its resistance to heat, water, and steam.
Do you stock other replacement parts?
Yes. We carry a wide range of hot tub repair parts and spa components. If you cannot find what you are looking for in our online catalog, please call our support line for assistance.
Get the right part, right now
Don't let a broken jet keep you out of the water. Order your replacement CMP grommet today or contact us for expert verification.
[Email fixmytub@gmail.com]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4093/6049/SPA-CMP29242-299-040_1__48173.1770767914.jpg?c=2 "Fix Your Spa with the CMP 5″ 500 Series SQR Jet Grommet
Stop leaks and restore your hot tub's performance with genuine replacement parts. We specialize in hard-to-find spa components to get you back to relaxing in no time.
[Shop Now at Western Tub and Pool]
Restore your relaxation
A worn-out grommet can lead to leaks and poor jet pressure, ruining your spa experience. The CMP 5″ 500 Series SQR Jet Grommet is the high-quality, durable solution you need.
Durable Construction
Crafted from high-grade Gray EPDM rubber, this grommet is designed to withstand the harsh chemical environment of hot tubs and provide a long-lasting seal.
Exact Fit for 500 Series
Designed specifically for the CMP 5″ 500 Series SQR assemblies, ensuring a precise fit that prevents leaks and restores original functionality.
Expert Support Availability
Don't guess when it comes to repairs. If you are struggling to identify your part, Western Tub and Pool offers dedicated assistance to ensure you buy the right component the first time.
Compatible with major hot tub brands
The CMP 5″ 500 Series SQR Jet Grommet is a versatile component used in the manufacturing of many popular spa models.
This part is frequently compatible with controls and systems found in:
CMP 500 Series Jet Assemblies
Various custom and major brand hot tubs utilizing SQR Jet bodies
Not sure if this fits your model?
Don't risk ordering the wrong part. Check your existing part number if known, or let our experts identify it for you.
Can't find the part you need? We can help.
At Western Tub and Pool, we specialize in hard-to-find hot tub repair parts. If you are unsure if this grommet is the correct replacement for your spa, we are here to assist.
How to get help:
Check your part number: Look for a number stamped on your old part.
Take a picture: Clear photos of the broken part help us identify the exact replacement.
Contact us: Email your part numbers and pictures to fixmytub@gmail.com or call us directly.
We will review your information and guide you to the exact replacement item from our extensive online catalog.
Frequently asked questions
How do I know if this grommet fits my hot tub?
This grommet is designed for the CMP 5″ 500 Series SQR Jet. If your current jet assembly matches this series, it will fit. We strongly recommend emailing us a picture of your current part to fixmytub@gmail.com so we can verify compatibility before you order.
What material is this grommet made of?
This replacement part is made of Gray EPDM (Ethylene Propylene Diene Monomer), a durable synthetic rubber known for its resistance to heat, water, and steam.
Do you stock other replacement parts?
Yes. We carry a wide range of hot tub repair parts and spa components. If you cannot find what you are looking for in our online catalog, please call our support line for assistance.
Get the right part, right now
Don't let a broken jet keep you out of the water. Order your replacement CMP grommet today or contact us for expert verification.
[Email fixmytub@gmail.com]")
![CMP 5-Inch SQR Whirlpool Pro-Loc Jet Body Replacement
Restore your hot tub's performance with the exact 1.5"Sx0.5"S part you need. Get expert assistance for hard-to-find spa components today.
[Shop Now at Western Tub and Pool]
Repair your spa with confidence
Don't let a broken jet body ruin your relaxation. The CMP 5in SQR Whirlpool Pro-Loc Jet Body is a critical component for maintaining the water pressure and massage capabilities of your hot tub. Whether you are a professional repair technician or a DIY homeowner, Western Tub and Pool ensures you get the right part the first time.
Exact specifications for a perfect fit
This replacement body features a 1.5″Sx0.5″S connection, ensuring a secure and leak-free installation for compatible plumbing systems.
Expert identification support
Struggling to identify your broken part? We specialize in hard-to-find hot tub repair parts. Simply send us a picture of your old part or your current part number, and our team will verify compatibility for you.
Comprehensive inventory
From the CMP 5in SQR Whirlpool Pro-Loc Jet Body to other obscure spa parts, we stock the components that big-box stores often miss.
Compatible hot tub models
This CMP Jet Body is utilized in the plumbing systems of numerous spa manufacturers. While compatibility varies by year and specific tub configuration, this part is commonly associated with systems requiring CMP Pro-Loc bodies.
Commonly compatible with:
Spas using CMP 5-inch Pro-Loc internal assemblies
Whirlpool systems requiring 1.5" socket x 0.5" socket configurations
Various custom and major brand hot tubs featuring CMP plumbing
Note: Please check our online catalogue or contact us directly to confirm your specific model.
Frequently asked questions
How do I know if this is the right part for my hot tub?
The most accurate way to verify the part is to check the part number on your existing jet body. If the number is worn off or you are unsure, please email us clear pictures of the part to fixmytub@gmail.com, and our experts will identify it for you.
What if I cannot find the part I need on your site?
Western Tub and Pool specializes in hard-to-find parts. If you don't see what you need, call us at 1-855-248-0777 or email us. We can often source parts that are no longer listed in standard catalogs.
Do you offer support for installation or selection?
Yes, we provide assistance to ensure you are selecting the correct replacement. While we recommend professional installation for plumbing parts, we are happy to guide you through the selection process to ensure you order the correct item.
Get the right part, right now
Stop guessing and start repairing. Contact Western Tub and Pool for verification or to place your order.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop Replacement Parts at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4092/6047/CMP29250-090-000__75646.1770766862.jpg?c=2 "CMP 5-Inch SQR Whirlpool Pro-Loc Jet Body Replacement
Restore your hot tub's performance with the exact 1.5\"Sx0.5\"S part you need. Get expert assistance for hard-to-find spa components today.
[Shop Now at Western Tub and Pool]
Repair your spa with confidence
Don't let a broken jet body ruin your relaxation. The CMP 5in SQR Whirlpool Pro-Loc Jet Body is a critical component for maintaining the water pressure and massage capabilities of your hot tub. Whether you are a professional repair technician or a DIY homeowner, Western Tub and Pool ensures you get the right part the first time.
Exact specifications for a perfect fit
This replacement body features a 1.5″Sx0.5″S connection, ensuring a secure and leak-free installation for compatible plumbing systems.
Expert identification support
Struggling to identify your broken part? We specialize in hard-to-find hot tub repair parts. Simply send us a picture of your old part or your current part number, and our team will verify compatibility for you.
Comprehensive inventory
From the CMP 5in SQR Whirlpool Pro-Loc Jet Body to other obscure spa parts, we stock the components that big-box stores often miss.
Compatible hot tub models
This CMP Jet Body is utilized in the plumbing systems of numerous spa manufacturers. While compatibility varies by year and specific tub configuration, this part is commonly associated with systems requiring CMP Pro-Loc bodies.
Commonly compatible with:
Spas using CMP 5-inch Pro-Loc internal assemblies
Whirlpool systems requiring 1.5\" socket x 0.5\" socket configurations
Various custom and major brand hot tubs featuring CMP plumbing
Note: Please check our online catalogue or contact us directly to confirm your specific model.
Frequently asked questions
How do I know if this is the right part for my hot tub?
The most accurate way to verify the part is to check the part number on your existing jet body. If the number is worn off or you are unsure, please email us clear pictures of the part to fixmytub@gmail.com, and our experts will identify it for you.
What if I cannot find the part I need on your site?
Western Tub and Pool specializes in hard-to-find parts. If you don't see what you need, call us at 1-855-248-0777 or email us. We can often source parts that are no longer listed in standard catalogs.
Do you offer support for installation or selection?
Yes, we provide assistance to ensure you are selecting the correct replacement. While we recommend professional installation for plumbing parts, we are happy to guide you through the selection process to ensure you order the correct item.
Get the right part, right now
Stop guessing and start repairing. Contact Western Tub and Pool for verification or to place your order.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop Replacement Parts at Western Tub and Pool]")
![CMP 5-Inch SQR Whirlpool Pro-Loc Jet Body Replacement
Restore your hot tub's performance with the exact 1.5"Sx0.5"S part you need. Get expert assistance for hard-to-find spa components today.
[Shop Now at Western Tub and Pool]
Repair your spa with confidence
Don't let a broken jet body ruin your relaxation. The CMP 5in SQR Whirlpool Pro-Loc Jet Body is a critical component for maintaining the water pressure and massage capabilities of your hot tub. Whether you are a professional repair technician or a DIY homeowner, Western Tub and Pool ensures you get the right part the first time.
Exact specifications for a perfect fit
This replacement body features a 1.5″Sx0.5″S connection, ensuring a secure and leak-free installation for compatible plumbing systems.
Expert identification support
Struggling to identify your broken part? We specialize in hard-to-find hot tub repair parts. Simply send us a picture of your old part or your current part number, and our team will verify compatibility for you.
Comprehensive inventory
From the CMP 5in SQR Whirlpool Pro-Loc Jet Body to other obscure spa parts, we stock the components that big-box stores often miss.
Compatible hot tub models
This CMP Jet Body is utilized in the plumbing systems of numerous spa manufacturers. While compatibility varies by year and specific tub configuration, this part is commonly associated with systems requiring CMP Pro-Loc bodies.
Commonly compatible with:
Spas using CMP 5-inch Pro-Loc internal assemblies
Whirlpool systems requiring 1.5" socket x 0.5" socket configurations
Various custom and major brand hot tubs featuring CMP plumbing
Note: Please check our online catalogue or contact us directly to confirm your specific model.
Frequently asked questions
How do I know if this is the right part for my hot tub?
The most accurate way to verify the part is to check the part number on your existing jet body. If the number is worn off or you are unsure, please email us clear pictures of the part to fixmytub@gmail.com, and our experts will identify it for you.
What if I cannot find the part I need on your site?
Western Tub and Pool specializes in hard-to-find parts. If you don't see what you need, call us at 1-855-248-0777 or email us. We can often source parts that are no longer listed in standard catalogs.
Do you offer support for installation or selection?
Yes, we provide assistance to ensure you are selecting the correct replacement. While we recommend professional installation for plumbing parts, we are happy to guide you through the selection process to ensure you order the correct item.
Get the right part, right now
Stop guessing and start repairing. Contact Western Tub and Pool for verification or to place your order.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop Replacement Parts at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4092/6048/CMP29250-090-000-02__50912.1770766871.jpg?c=2 "CMP 5-Inch SQR Whirlpool Pro-Loc Jet Body Replacement
Restore your hot tub's performance with the exact 1.5\"Sx0.5\"S part you need. Get expert assistance for hard-to-find spa components today.
[Shop Now at Western Tub and Pool]
Repair your spa with confidence
Don't let a broken jet body ruin your relaxation. The CMP 5in SQR Whirlpool Pro-Loc Jet Body is a critical component for maintaining the water pressure and massage capabilities of your hot tub. Whether you are a professional repair technician or a DIY homeowner, Western Tub and Pool ensures you get the right part the first time.
Exact specifications for a perfect fit
This replacement body features a 1.5″Sx0.5″S connection, ensuring a secure and leak-free installation for compatible plumbing systems.
Expert identification support
Struggling to identify your broken part? We specialize in hard-to-find hot tub repair parts. Simply send us a picture of your old part or your current part number, and our team will verify compatibility for you.
Comprehensive inventory
From the CMP 5in SQR Whirlpool Pro-Loc Jet Body to other obscure spa parts, we stock the components that big-box stores often miss.
Compatible hot tub models
This CMP Jet Body is utilized in the plumbing systems of numerous spa manufacturers. While compatibility varies by year and specific tub configuration, this part is commonly associated with systems requiring CMP Pro-Loc bodies.
Commonly compatible with:
Spas using CMP 5-inch Pro-Loc internal assemblies
Whirlpool systems requiring 1.5\" socket x 0.5\" socket configurations
Various custom and major brand hot tubs featuring CMP plumbing
Note: Please check our online catalogue or contact us directly to confirm your specific model.
Frequently asked questions
How do I know if this is the right part for my hot tub?
The most accurate way to verify the part is to check the part number on your existing jet body. If the number is worn off or you are unsure, please email us clear pictures of the part to fixmytub@gmail.com, and our experts will identify it for you.
What if I cannot find the part I need on your site?
Western Tub and Pool specializes in hard-to-find parts. If you don't see what you need, call us at 1-855-248-0777 or email us. We can often source parts that are no longer listed in standard catalogs.
Do you offer support for installation or selection?
Yes, we provide assistance to ensure you are selecting the correct replacement. While we recommend professional installation for plumbing parts, we are happy to guide you through the selection process to ensure you order the correct item.
Get the right part, right now
Stop guessing and start repairing. Contact Western Tub and Pool for verification or to place your order.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop Replacement Parts at Western Tub and Pool]")
![Restore Your Hot Tub with the 3″ SQR Jet Grommet
Don't let a broken jet ruin your relaxation. Get the specific 3″ SQR Jet Grommet (Grey) you need to fix your spa, backed by expert support for hard-to-find parts.
[Browse Now at Western Tub and Pool]
Precision Parts for Your Spa
Finding the exact replacement part for a hot tub can be frustrating. We make it simple. Our 3″ SQR Jet Grommets are designed for durability and a perfect fit, helping you extend the life of your spa.
Designed for Compatibility
These grey grommets are engineered to fit a wide variety of hot tub brands and control systems, ensuring a seamless repair process.
Expert Support Available
We don't just sell parts; we solve problems. If you are unsure if this is the right fit, our team is ready to guide you through the selection process.
Compatible Hot Tub Models
The 3″ SQR Jet Grommet is a versatile component used in many popular hot tub brands. While this part is highly compatible, we always recommend verifying your specific model.
Commonly supported configurations include:
Standard 3" Jet assemblies
Systems requiring SQR mounting
Various control systems (Check our online catalog for specific control compatibility)
Please refer to our full online catalog to confirm your specific model number.
Struggling to find a specific part?
If you can't find the part number or are unsure what you need, let us do the detective work for you. We specialize in locating hard-to-find spa repair parts.
How to get help:
Check your part number: Look for a stamped number on the old part.
Take a picture: Clear photos help us identify the exact component.
Email us: Send your part numbers or photos to fixmytub@gmail.com.
Frequently asked questions
How do I know if this grommet fits my hot tub?
The most accurate way to ensure fit is to check the part number on your existing unit. If the number is worn off, measure the diameter of the jet opening. It should match the 3-inch specification. You can also email us a picture for verification.
What information do I need to provide for assistance?
To help us find your part quickly, please provide the make and model of your hot tub, the year it was manufactured, and any part numbers visible on the broken component.
Do you offer support for other spa parts?
Yes. We stock a vast inventory of replacement hot tub repair parts. If you need assistance with controls, pumps, or plumbing, give us a call.
Get your spa running again
Don't wait to fix your hot tub. Contact Western Tub and Pool today for the parts and expertise you need.
[Call 1-855-248-0777]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4081/6022/SPA-CMP29232-299-040__10740.1770418246.jpg?c=2 "Restore Your Hot Tub with the 3″ SQR Jet Grommet
Don't let a broken jet ruin your relaxation. Get the specific 3″ SQR Jet Grommet (Grey) you need to fix your spa, backed by expert support for hard-to-find parts.
[Browse Now at Western Tub and Pool]
Precision Parts for Your Spa
Finding the exact replacement part for a hot tub can be frustrating. We make it simple. Our 3″ SQR Jet Grommets are designed for durability and a perfect fit, helping you extend the life of your spa.
Designed for Compatibility
These grey grommets are engineered to fit a wide variety of hot tub brands and control systems, ensuring a seamless repair process.
Expert Support Available
We don't just sell parts; we solve problems. If you are unsure if this is the right fit, our team is ready to guide you through the selection process.
Compatible Hot Tub Models
The 3″ SQR Jet Grommet is a versatile component used in many popular hot tub brands. While this part is highly compatible, we always recommend verifying your specific model.
Commonly supported configurations include:
Standard 3\" Jet assemblies
Systems requiring SQR mounting
Various control systems (Check our online catalog for specific control compatibility)
Please refer to our full online catalog to confirm your specific model number.
Struggling to find a specific part?
If you can't find the part number or are unsure what you need, let us do the detective work for you. We specialize in locating hard-to-find spa repair parts.
How to get help:
Check your part number: Look for a stamped number on the old part.
Take a picture: Clear photos help us identify the exact component.
Email us: Send your part numbers or photos to fixmytub@gmail.com.
Frequently asked questions
How do I know if this grommet fits my hot tub?
The most accurate way to ensure fit is to check the part number on your existing unit. If the number is worn off, measure the diameter of the jet opening. It should match the 3-inch specification. You can also email us a picture for verification.
What information do I need to provide for assistance?
To help us find your part quickly, please provide the make and model of your hot tub, the year it was manufactured, and any part numbers visible on the broken component.
Do you offer support for other spa parts?
Yes. We stock a vast inventory of replacement hot tub repair parts. If you need assistance with controls, pumps, or plumbing, give us a call.
Get your spa running again
Don't wait to fix your hot tub. Contact Western Tub and Pool today for the parts and expertise you need.
[Call 1-855-248-0777]")
![Replace Your Hot Tub Filter Body Grommet Today
Don't let a worn-out grommet stop you from enjoying your spa. Get the exact CMP SQR Filter Body Grommet you need to keep your hot tub running smoothly.
[Shop Now at Western Tub and Pool]
Find the Hard-to-Find Parts You Need
Finding the right replacement parts for your hot tub shouldn't be a hassle. At Western Tub and Pool, we specialize in stocking essential repair components like the CMP SQR Filter Body Grommet, ensuring you can fix your tub quickly and get back to relaxing.
Why choose Western Tub and Pool?
Expert Assistance: struggling to identify your part? We are here to help. Send us a picture or your part number, and we will do the detective work for you.
Wide Compatibility: This specific grommet is a crucial component used in a wide variety of hot tub models and compatible topside controls.
Direct Support: We are just a phone call or email away. No automated loops—just real help.
Hot Tub Compatibility
The CMP SQR Filter Body Grommet is a versatile part used in numerous spa brands. While specific model lists can be extensive, this part is commonly required for repairs involving:
CMP Filter Assemblies
Various Spa Brands utilizing Square Filter Bodies
Topside control interfaces requiring specific sealing grommets
Unsure if this fits your model? Check your part number or contact us directly for verification.
Need Help Identifying Your Part?
We know that hot tub repair can be confusing. If you don't know your part number, simply take a clear picture of the broken or worn part and email it to us. We will identify it and guide you to the correct replacement.
Email us at: fixmytub@gmail.com
Frequently Asked Questions
How do I know if this grommet fits my hot tub?
The best way is to check the part number on your old grommet if it is visible. If not, please send us a photo via email at fixmytub@gmail.com, or give us a call, and our team will help you verify compatibility.
Do you stock other replacement parts?
Yes! We carry a wide range of hot tub repair parts including filters, pumps, jets, and more. Check our online catalog or call us to find exactly what you are looking for.
What if I can't find the part number?
No problem. Send us an email with photos of the part and your hot tub model information. We specialize in finding hard-to-locate parts.
How can I order this part?
You can order directly through us. Call 1-855-248-0777 to place your order or get more information about pricing and shipping.
Get Your Spa Running Again
Don't wait for a small leak to become a big problem. Contact Western Tub and Pool today for your CMP SQR Filter Body Grommet and all your other spa repair needs.
[Browse Now at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4034/5943/CMP_SQR_Filter_Body_Grommet_Gray__85132.1769454426.jpg?c=2 "Replace Your Hot Tub Filter Body Grommet Today
Don't let a worn-out grommet stop you from enjoying your spa. Get the exact CMP SQR Filter Body Grommet you need to keep your hot tub running smoothly.
[Shop Now at Western Tub and Pool]
Find the Hard-to-Find Parts You Need
Finding the right replacement parts for your hot tub shouldn't be a hassle. At Western Tub and Pool, we specialize in stocking essential repair components like the CMP SQR Filter Body Grommet, ensuring you can fix your tub quickly and get back to relaxing.
Why choose Western Tub and Pool?
Expert Assistance: struggling to identify your part? We are here to help. Send us a picture or your part number, and we will do the detective work for you.
Wide Compatibility: This specific grommet is a crucial component used in a wide variety of hot tub models and compatible topside controls.
Direct Support: We are just a phone call or email away. No automated loops—just real help.
Hot Tub Compatibility
The CMP SQR Filter Body Grommet is a versatile part used in numerous spa brands. While specific model lists can be extensive, this part is commonly required for repairs involving:
CMP Filter Assemblies
Various Spa Brands utilizing Square Filter Bodies
Topside control interfaces requiring specific sealing grommets
Unsure if this fits your model? Check your part number or contact us directly for verification.
Need Help Identifying Your Part?
We know that hot tub repair can be confusing. If you don't know your part number, simply take a clear picture of the broken or worn part and email it to us. We will identify it and guide you to the correct replacement.
Email us at: fixmytub@gmail.com
Frequently Asked Questions
How do I know if this grommet fits my hot tub?
The best way is to check the part number on your old grommet if it is visible. If not, please send us a photo via email at fixmytub@gmail.com, or give us a call, and our team will help you verify compatibility.
Do you stock other replacement parts?
Yes! We carry a wide range of hot tub repair parts including filters, pumps, jets, and more. Check our online catalog or call us to find exactly what you are looking for.
What if I can't find the part number?
No problem. Send us an email with photos of the part and your hot tub model information. We specialize in finding hard-to-locate parts.
How can I order this part?
You can order directly through us. Call 1-855-248-0777 to place your order or get more information about pricing and shipping.
Get Your Spa Running Again
Don't wait for a small leak to become a big problem. Contact Western Tub and Pool today for your CMP SQR Filter Body Grommet and all your other spa repair needs.
[Browse Now at Western Tub and Pool]")
![Repair Your Spa with the CMP 3″ Pro-Loc SQR LED Jet Body
Restore your hot tub to peak performance with the genuine CMP 3″ Pro-Loc SQR LED Jet Body. Don't let a broken jet ruin your relaxation—get the exact part you need today.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Your Spa Repair
Finding the right replacement parts for your hot tub can be frustrating. We make it simple. The CMP 3″ Pro-Loc SQR LED Jet Body (3/4″ SB x 3/8″ SB) is a high-quality replacement component designed to get your spa bubbling again.
Why choose Western Tub and Pool?
Expert Assistance: struggling to identify your part? We specialize in hard-to-find hot tub parts.
Verification Made Easy: Not sure if this is the right fit? Send us your part number or pictures, and we will verify it for you.
Direct Support: We are just a phone call or email away to help you with your repair needs.
Compatible Hot Tub Models
This CMP jet body is used in many popular hot tub brands and models. While this list is not exhaustive, it includes common compatibility:
Alps Spas
Artesian Spas
Bullfrog Spas
Cal Spas
Catalina Spas
Clearwater Spas
Coast Spas
Dynasty Spas
Master Spas
Viking Spas
Please check your specific model manual or contact us to confirm compatibility.
Frequently Asked Questions
How do I know if this is the right part for my tub?
The most reliable way is to check the part number on your existing jet body. If you can't find it, take a clear picture of the part and email it to us at fixmytub@gmail.com. We will help you identify exactly what you need.
What are the specifications for this jet body?
This is a CMP 3″ Pro-Loc SQR LED Jet Body with a 3/4″ Smooth Barb (SB) water connection and a 3/8″ Smooth Barb (SB) air connection.
Do you offer support for hard-to-find parts?
Absolutely. Specializing in hard-to-find spa parts is what we do best. If you don't see what you need in our online catalog, give us a call at 1-855-248-0777.
Can I get help with installation advice?
While we supply the parts, we recommend consulting a professional for installation. However, our team can provide guidance on selecting the correct replacement components for your specific system controls.
Need help finding your part?
Don't guess—get it right the first time. Email us your photos or part numbers at fixmytub@gmail.com, or speak to a specialist directly.
[Call 1-855-248-0777 Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4082/6023/SPA-CMP29232-299-000__28569.1770418611.jpg?c=2 "Repair Your Spa with the CMP 3″ Pro-Loc SQR LED Jet Body
Restore your hot tub to peak performance with the genuine CMP 3″ Pro-Loc SQR LED Jet Body. Don't let a broken jet ruin your relaxation—get the exact part you need today.
[Shop Now at Western Tub and Pool]
The Perfect Fit for Your Spa Repair
Finding the right replacement parts for your hot tub can be frustrating. We make it simple. The CMP 3″ Pro-Loc SQR LED Jet Body (3/4″ SB x 3/8″ SB) is a high-quality replacement component designed to get your spa bubbling again.
Why choose Western Tub and Pool?
Expert Assistance: struggling to identify your part? We specialize in hard-to-find hot tub parts.
Verification Made Easy: Not sure if this is the right fit? Send us your part number or pictures, and we will verify it for you.
Direct Support: We are just a phone call or email away to help you with your repair needs.
Compatible Hot Tub Models
This CMP jet body is used in many popular hot tub brands and models. While this list is not exhaustive, it includes common compatibility:
Alps Spas
Artesian Spas
Bullfrog Spas
Cal Spas
Catalina Spas
Clearwater Spas
Coast Spas
Dynasty Spas
Master Spas
Viking Spas
Please check your specific model manual or contact us to confirm compatibility.
Frequently Asked Questions
How do I know if this is the right part for my tub?
The most reliable way is to check the part number on your existing jet body. If you can't find it, take a clear picture of the part and email it to us at fixmytub@gmail.com. We will help you identify exactly what you need.
What are the specifications for this jet body?
This is a CMP 3″ Pro-Loc SQR LED Jet Body with a 3/4″ Smooth Barb (SB) water connection and a 3/8″ Smooth Barb (SB) air connection.
Do you offer support for hard-to-find parts?
Absolutely. Specializing in hard-to-find spa parts is what we do best. If you don't see what you need in our online catalog, give us a call at 1-855-248-0777.
Can I get help with installation advice?
While we supply the parts, we recommend consulting a professional for installation. However, our team can provide guidance on selecting the correct replacement components for your specific system controls.
Need help finding your part?
Don't guess—get it right the first time. Email us your photos or part numbers at fixmytub@gmail.com, or speak to a specialist directly.
[Call 1-855-248-0777 Now]")