Canadian Dollars
US Dollar
Euro
Product Description
Genuine Gecko 6330 Series SSPA EPROM — Part 37-0050C
Keep your hot tub running strong with a brand-new Gecko 6330 Series SSPA EPROM (Part 37-0050C), the exact replacement chip your Gecko spa pack needs to get back up and running.
[Shop and order at Western Tub and Pool]
Why hot tub owners trust this part
Your Gecko SSPA 6330 series spa pack relies on its EPROM to control everything from temperature regulation to pump cycles. When this chip fails or becomes outdated, your entire hot tub experience suffers. This brand-new, genuine Gecko 37-0050C EPROM restores your spa pack to full working order, without the cost or hassle of replacing the entire circuit board.
What makes this part worth ordering
- Brand New Condition: This is not a refurbished or used part—you're getting a fresh, genuine Gecko EPROM.
- Purpose-Built for the 6330 Series: Designed specifically for compatibility with Gecko SSPA 6330 series spa packs.
- A Cost-Effective Fix: Replacing the EPROM is often far more affordable than swapping out your entire spa pack.
- Backed by Real Support: Our team at Western Tub and Pool is available to help you confirm fit before you order, so you're not left guessing.
Which hot tubs and controls use this part?
Gecko is one of the industry's most widely used spa pack manufacturers, and its SSPA 6330 series has been installed across a wide range of hot tub brands and models over the years.
Because spa pack configurations vary by manufacturer, model year, and region, we strongly recommend confirming compatibility before ordering. The fastest way to check?
- Send us your part number, if known
- Or send a photo of your existing circuit board, along with your hot tub's make, model, and serial number
Email us at fixmytub@gmail.com or call 1-855-248-0777, and our team will help you confirm whether the 37-0050C is the right match for your spa.
A note on part dimensions and specifications
EPROM chips like the 37-0050C are compact, precision-engineered components designed to fit directly into your existing Gecko SSPA 6330 series circuit board. Because exact specifications can vary slightly depending on regional production runs, we recommend contacting our team to confirm sizing details ahead of installation, especially if you're working with limited clearance inside your spa pack housing.
Frequently asked questions
How do I know if the 37-0050C EPROM is the right part for my hot tub?
The best way to confirm fit is to check your existing part number, if visible, or send us a photo of your circuit board along with your hot tub's make, model, and serial number. Our team will verify compatibility before you order.
What does the letter suffix on this part number mean?
As an international e-retailer, Western Tub and Pool sources parts from warehouses across multiple regions. To help you identify where a part is shipping from, we've added regional suffixes: U for USA, C for Canada, E for Europe, and A for Asia. Some parts may be available from more than one region, which can affect shipping time and cost.
Is this part new or refurbished?
This EPROM is brand new.
What if I can't find my exact part number?
No problem. Send us an email at fixmytub@gmail.com with a picture of your circuit board along with your hot tub's make, model, and serial number, and we'll help track down the correct match.
Can I order additional related repair parts at the same time?
Yes. This EPROM often coincides with other spa pack repair components. Check our online catalogue or give us a call to see which additional parts might be worth ordering alongside your 37-0050C.
Get your hot tub back up and running
Don't let a failed EPROM keep you out of your hot tub. Order your genuine Gecko 6330 Series SSPA EPROM 37-0050C today.
[Shop and order at Western Tub and Pool]
Hard to find the part you need? Send us an email at fixmytub@gmail.com and our team will help track it down.
As an international e-retailer, Western Tub and Pool sources inventory from warehouses across multiple regions. That's why you'll see suffixes added to our part numbers: U for USA, C for Canada, E for Europe, and A for Asia. Because the same part may be available from more than one region, shipping times and costs can vary; and in some cases, you may see what looks like a duplicate listing simply because it's stocked in a different warehouse.
If you already know your part number, double-check it before ordering. If you're not sure, send us a picture of your part along with your hot tub's make, model, and serial number, and we'll help you find the right fit.
![Gecko 6200 Series SSPA EPROM 37-0050: Genuine New Replacement Chip
Stop searching for a discontinued part. Western Tub and Pool stocks the Gecko 6200 Series SSPA EPROM 37-0050, brand new, ready to get your spa pack back online.
[Shop and order at Western Tub and Pool]
Why this part matters
The 37-0050 EPROM is the programming chip at the heart of your Gecko 6200 Series SSPA control board. It stores the firmware that tells your spa pack how to run your heater, pumps, and blower. When this chip fails, your entire system can shut down or start throwing error codes—even if every other component is working fine.
Because the SSPA/S-Class series has been discontinued by Gecko for several years, finding this exact EPROM new is difficult. That's where we come in.
What makes this part worth grabbing
Brand New Stock: No refurbished guesswork—this is a new-condition 37-0050 EPROM.
Direct Fit for 6200 Series SSPA Boards: Designed specifically for Gecko's SSPA-1 and SSPA-MP control systems.
Hard-to-Find Part, In Stock: We specialize in sourcing discontinued and hard-to-locate hot tub electronics.
International Sourcing Network: We warehouse parts across multiple regions, so you get faster access no matter where you're located.
Compatible spa packs & control systems
The Gecko 6200 Series SSPA EPROM 37-0050 is designed to work with the following Gecko SSPA/S-Class control boxes and configurations:
SSPA-1-AS
SSPA-MP-P121-P211-B1-01
SSPA-MP-P122-P212-B1-CP1-O1
SC-CF-P12-O-CP
SC-MP-P122-P212-B1-CP1-O1
SC-MP-P122-P212-P312-B1-01
Compatible topside controls include: TSC-9, TSC-18, TSC-19, TSC-35, K-18, K-19, K-44, K-72
Hot tub brands known to use Gecko SSPA / S-Class systems
Gecko's SSPA and S-Class control systems were supplied to numerous spa manufacturers over the years, including:
Artesian Spas
LA Spa
Leisure Bay Spas
Beachcomber Hot Tubs
Hydro-Quip configured spa systems
HS Systems models
Since manufacturers occasionally rebadge or customize their control boxes, we recommend confirming your specific model against your existing part number before ordering. Not sure if this is your part? Send us your make, model, and serial number and we'll confirm the fit for you.
Cross-reference numbers
The 37-0050 EPROM is associated with the following related part numbers:
37-0050C (Gecko 6330 Series SSPA EPROM)
3-62-7003 (associated SSPA circuit board ID)
0202-205212, 0202-207004, 0202-207005 (compatible S-Class control boxes)
Check our online catalogue or give us a call to confirm your cross-reference number matches before you order.
Dimensions & weight
As a compact integrated circuit chip, the 37-0050 EPROM is lightweight and small enough to ship economically worldwide. Exact chip dimensions and packaging weight can vary slightly by warehouse region. For precise measurements ahead of your purchase, contact our team at 1-855-248-0777 or fixmytub@gmail.com.
Frequently Asked Questions
What does the Gecko 6200 Series SSPA EPROM 37-0050 actually do?
It's the memory chip that stores your spa pack's operating firmware. It tells your control board how to manage your heater, pumps, blower, and other functions.
Is this part still made by Gecko?
No. The SSPA/S-Class series has been discontinued by Gecko for several years. That's exactly why finding a genuine, new EPROM like this one is so valuable—supply is limited.
How do I know if this is the right EPROM for my hot tub?
Check the part number printed on your existing circuit board or chip. If you're unsure, send us a photo of your board along with your spa's make, model, and serial number, and we'll confirm the match for you.
Will shipping vary depending on where I order from?
Yes. As an international e-retailer, Western Tub and Pool sources parts from warehouses across the U.S.A, Canada, Europe, and Asia. We use region suffixes on our part numbers to identify origin, which can affect shipping time and cost.
What do the region suffixes on your parts mean?
U – United States
C – Canada
E – Europe
A – Asia
Some parts may exist as duplicates across regions, so check the suffix on your quote or listing to understand where your part will ship from.
What if I can't find my exact part number?
No problem. Send us pictures of your part, along with your hot tub's make, model, and serial number, and our team will help track down the correct match.
Can't find your part? We specialize in the hard-to-find.
Discontinued Gecko components, obsolete circuit boards, legacy EPROMs—if it's difficult to source, it's exactly the kind of part we go looking for.
Email us at fixmytub@gmail.com for hard-to-find product part assistance.
Remember: Western Tub and Pool warehouses parts internationally, with U (U.S.A), C (Canada), E (Europe), and A (Asia) suffixes marking each part's origin. Since some products exist as duplicates across regions, checking your part number—or sending us photos, make, model, and serial number—helps us get you the right part, from the right warehouse, at the right price.
[Shop and order at Western Tub and Pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4558/6842/37-0050__11586.1789234141.PNG?c=2 "Gecko 6200 Series SSPA EPROM 37-0050: Genuine New Replacement Chip
Stop searching for a discontinued part. Western Tub and Pool stocks the Gecko 6200 Series SSPA EPROM 37-0050, brand new, ready to get your spa pack back online.
[Shop and order at Western Tub and Pool]
Why this part matters
The 37-0050 EPROM is the programming chip at the heart of your Gecko 6200 Series SSPA control board. It stores the firmware that tells your spa pack how to run your heater, pumps, and blower. When this chip fails, your entire system can shut down or start throwing error codes—even if every other component is working fine.
Because the SSPA/S-Class series has been discontinued by Gecko for several years, finding this exact EPROM new is difficult. That's where we come in.
What makes this part worth grabbing
Brand New Stock: No refurbished guesswork—this is a new-condition 37-0050 EPROM.
Direct Fit for 6200 Series SSPA Boards: Designed specifically for Gecko's SSPA-1 and SSPA-MP control systems.
Hard-to-Find Part, In Stock: We specialize in sourcing discontinued and hard-to-locate hot tub electronics.
International Sourcing Network: We warehouse parts across multiple regions, so you get faster access no matter where you're located.
Compatible spa packs & control systems
The Gecko 6200 Series SSPA EPROM 37-0050 is designed to work with the following Gecko SSPA/S-Class control boxes and configurations:
SSPA-1-AS
SSPA-MP-P121-P211-B1-01
SSPA-MP-P122-P212-B1-CP1-O1
SC-CF-P12-O-CP
SC-MP-P122-P212-B1-CP1-O1
SC-MP-P122-P212-P312-B1-01
Compatible topside controls include: TSC-9, TSC-18, TSC-19, TSC-35, K-18, K-19, K-44, K-72
Hot tub brands known to use Gecko SSPA / S-Class systems
Gecko's SSPA and S-Class control systems were supplied to numerous spa manufacturers over the years, including:
Artesian Spas
LA Spa
Leisure Bay Spas
Beachcomber Hot Tubs
Hydro-Quip configured spa systems
HS Systems models
Since manufacturers occasionally rebadge or customize their control boxes, we recommend confirming your specific model against your existing part number before ordering. Not sure if this is your part? Send us your make, model, and serial number and we'll confirm the fit for you.
Cross-reference numbers
The 37-0050 EPROM is associated with the following related part numbers:
37-0050C (Gecko 6330 Series SSPA EPROM)
3-62-7003 (associated SSPA circuit board ID)
0202-205212, 0202-207004, 0202-207005 (compatible S-Class control boxes)
Check our online catalogue or give us a call to confirm your cross-reference number matches before you order.
Dimensions & weight
As a compact integrated circuit chip, the 37-0050 EPROM is lightweight and small enough to ship economically worldwide. Exact chip dimensions and packaging weight can vary slightly by warehouse region. For precise measurements ahead of your purchase, contact our team at 1-855-248-0777 or fixmytub@gmail.com.
Frequently Asked Questions
What does the Gecko 6200 Series SSPA EPROM 37-0050 actually do?
It's the memory chip that stores your spa pack's operating firmware. It tells your control board how to manage your heater, pumps, blower, and other functions.
Is this part still made by Gecko?
No. The SSPA/S-Class series has been discontinued by Gecko for several years. That's exactly why finding a genuine, new EPROM like this one is so valuable—supply is limited.
How do I know if this is the right EPROM for my hot tub?
Check the part number printed on your existing circuit board or chip. If you're unsure, send us a photo of your board along with your spa's make, model, and serial number, and we'll confirm the match for you.
Will shipping vary depending on where I order from?
Yes. As an international e-retailer, Western Tub and Pool sources parts from warehouses across the U.S.A, Canada, Europe, and Asia. We use region suffixes on our part numbers to identify origin, which can affect shipping time and cost.
What do the region suffixes on your parts mean?
U – United States
C – Canada
E – Europe
A – Asia
Some parts may exist as duplicates across regions, so check the suffix on your quote or listing to understand where your part will ship from.
What if I can't find my exact part number?
No problem. Send us pictures of your part, along with your hot tub's make, model, and serial number, and our team will help track down the correct match.
Can't find your part? We specialize in the hard-to-find.
Discontinued Gecko components, obsolete circuit boards, legacy EPROMs—if it's difficult to source, it's exactly the kind of part we go looking for.
Email us at fixmytub@gmail.com for hard-to-find product part assistance.
Remember: Western Tub and Pool warehouses parts internationally, with U (U.S.A), C (Canada), E (Europe), and A (Asia) suffixes marking each part's origin. Since some products exist as duplicates across regions, checking your part number—or sending us photos, make, model, and serial number—helps us get you the right part, from the right warehouse, at the right price.
[Shop and order at Western Tub and Pool]")
![Reliable Power for Your Spa
Get the universal replacement for your spa's s-class control system. The Gecko S-CLASS Controller ensures your spa runs perfectly, replacing all previous models. repair your tub today
[Shop Now at western tub and pool 1-855-248-0777]
The Universal Spa Controller Solution
Finding the right replacement for your spa's control system can be a challenge. The Gecko S-CLASS Lower Controller (Model 0202-205162) is the definitive, universal replacement for all previous versions, designed to get your spa back up and running without compatibility issues.
This controller is engineered for versatility and reliability, managing all your spa’s essential functions with precision.
Key Specifications and Features
Comprehensive Output Management
This controller is built to handle your spa's complete setup.
Pump 1: Two speeds (240V)
Pump 2: One speed (240V)
Optional Circulation Pump & Blower: 120V
Ozonator: 120V
Configurable Voltage
Every output's voltage can be reconfigured, providing the flexibility needed for various spa models and setups.
Powerful Heating
Includes a robust 4kW heater to maintain your ideal water temperature efficiently.
Broad Keypad Compatibility
Works seamlessly with a range of keypads, including TSC-9, TSC-18, TSC-19, and TSC-35, ensuring easy integration with your existing interface.
Frequently Asked Questions
Is this controller compatible with my old spa system?
Yes, this Gecko S-CLASS controller is designed as the universal replacement for all previous models and versions. It is the only replacement part available, ensuring forward compatibility. Alternatively you may call us to inquire about refit lower control packages .
Can I reconfigure the output voltages?
Absolutely. One of the key features of this controller is that every output's voltage can be reconfigured to match your spa's specific requirements.
Which keypads work with this controller?
This controller is compatible with Gecko keypads TSC-9, TSC-18, TSC-19, and TSC-35. Please ensure your keypad is one of these models for proper functionality.
What's included with the controller?
The unit includes the main controller box with a 4kW heater and JJM-type connectors. Keypads and other accessories are sold separately.
Restore Your Spa's Performance
Order the Gecko S-CLASS Spa Controller today and ensure your spa operates smoothly for years to come.
[Buy your replacment s-class lower control Now at Western tub and pool 1-855-248-0777]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/2757/5594/Gecko_Sclass_lower_controls_at_western_tub_and_pool_403-248-0777__57478.1760583994.png?c=2 "Reliable Power for Your Spa
Get the universal replacement for your spa's s-class control system. The Gecko S-CLASS Controller ensures your spa runs perfectly, replacing all previous models. repair your tub today
[Shop Now at western tub and pool 1-855-248-0777]
The Universal Spa Controller Solution
Finding the right replacement for your spa's control system can be a challenge. The Gecko S-CLASS Lower Controller (Model 0202-205162) is the definitive, universal replacement for all previous versions, designed to get your spa back up and running without compatibility issues.
This controller is engineered for versatility and reliability, managing all your spa’s essential functions with precision.
Key Specifications and Features
Comprehensive Output Management
This controller is built to handle your spa's complete setup.
Pump 1: Two speeds (240V)
Pump 2: One speed (240V)
Optional Circulation Pump & Blower: 120V
Ozonator: 120V
Configurable Voltage
Every output's voltage can be reconfigured, providing the flexibility needed for various spa models and setups.
Powerful Heating
Includes a robust 4kW heater to maintain your ideal water temperature efficiently.
Broad Keypad Compatibility
Works seamlessly with a range of keypads, including TSC-9, TSC-18, TSC-19, and TSC-35, ensuring easy integration with your existing interface.
Frequently Asked Questions
Is this controller compatible with my old spa system?
Yes, this Gecko S-CLASS controller is designed as the universal replacement for all previous models and versions. It is the only replacement part available, ensuring forward compatibility. Alternatively you may call us to inquire about refit lower control packages .
Can I reconfigure the output voltages?
Absolutely. One of the key features of this controller is that every output's voltage can be reconfigured to match your spa's specific requirements.
Which keypads work with this controller?
This controller is compatible with Gecko keypads TSC-9, TSC-18, TSC-19, and TSC-35. Please ensure your keypad is one of these models for proper functionality.
What's included with the controller?
The unit includes the main controller box with a 4kW heater and JJM-type connectors. Keypads and other accessories are sold separately.
Restore Your Spa's Performance
Order the Gecko S-CLASS Spa Controller today and ensure your spa operates smoothly for years to come.
[Buy your replacment s-class lower control Now at Western tub and pool 1-855-248-0777]")
