Canadian Dollars
US Dollar
Euro
![Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
Part Number: LIT16000328
System Compatibility: Cal Spas Advantage 2000+ UV Systems
Length: 11.5 Inches
Weight: 4.00 lbs
Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
Escape Series
Platinum Series
Balboa PZ-516L & PPZ-524L
Kona PZ-519L & PPZ-533L
Hawaiian PZ-620L
Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/1280x1280/products/4377/6620/uv_lite_2__08725.1779728475.PNG?c=2 "Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
Part Number: LIT16000328
System Compatibility: Cal Spas Advantage 2000+ UV Systems
Length: 11.5 Inches
Weight: 4.00 lbs
Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
Escape Series
Platinum Series
Balboa PZ-516L & PPZ-524L
Kona PZ-519L & PPZ-533L
Hawaiian PZ-620L
Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]")
![Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
Part Number: LIT16000328
System Compatibility: Cal Spas Advantage 2000+ UV Systems
Length: 11.5 Inches
Weight: 4.00 lbs
Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
Escape Series
Platinum Series
Balboa PZ-516L & PPZ-524L
Kona PZ-519L & PPZ-533L
Hawaiian PZ-620L
Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/100x100/products/4377/6620/uv_lite_2__08725.1779728475.PNG?c=2 "Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
Part Number: LIT16000328
System Compatibility: Cal Spas Advantage 2000+ UV Systems
Length: 11.5 Inches
Weight: 4.00 lbs
Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
Escape Series
Platinum Series
Balboa PZ-516L & PPZ-524L
Kona PZ-519L & PPZ-533L
Hawaiian PZ-620L
Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]")
Product Description
Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
- Part Number: LIT16000328
- System Compatibility: Cal Spas Advantage 2000+ UV Systems
- Length: 11.5 Inches
- Weight: 4.00 lbs
- Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
- Escape Series
- Platinum Series
- Balboa PZ-516L & PPZ-524L
- Kona PZ-519L & PPZ-533L
- Hawaiian PZ-620L
- Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]
![Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
Part Number: LIT16000328
System Compatibility: Cal Spas Advantage 2000+ UV Systems
Length: 11.5 Inches
Weight: 4.00 lbs
Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
Escape Series
Platinum Series
Balboa PZ-516L & PPZ-524L
Kona PZ-519L & PPZ-533L
Hawaiian PZ-620L
Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4377/6620/uv_lite_2__08725.1779728475.PNG?c=2 "Crystal Clear Spa Water Awaits
Ensure maximum water disinfection with the genuine Cal Spas UV Light System Advantage 2000+ Quartz Sleeve. Shop and order at Western tub and pool to keep your hot tub safe, clean, and ready to enjoy.
[Order your replacement sleeve]
Upgrade your hot tub's sanitation
The Advantage 2000+ Quartz Sleeve is designed to enhance the performance of your UV light system by allowing maximum light penetration. This vital component plays a crucial role in achieving sparkling clear water while effectively reducing harmful bacteria and algae.
Premium quartz construction
Built from high-quality quartz material, this sleeve provides a highly durable barrier that protects your UV lamp while withstanding harsh environmental factors and spa chemicals.
Effortless installation
Whether you are setting up a brand-new UV system or replacing an old, cloudy sleeve, this part is designed for a quick and simple installation so you can get back to relaxing.
Optimal light penetration
Over time, standard sleeves can become hazy, blocking the UV light necessary for proper sanitation. A fresh quartz sleeve ensures your UV system operates at peak efficiency.
Product specifications
Part Number: LIT16000328
System Compatibility: Cal Spas Advantage 2000+ UV Systems
Length: 11.5 Inches
Weight: 4.00 lbs
Material: High-grade Quartz with included rubber gasket (where applicable)
Compatible hot tubs and control systems
The Advantage 2000+ Quartz Sleeve (LIT16000328) is an original OEM replacement part used in a wide variety of Cal Spas models and compatible with major control systems like Balboa and Gecko.
Commonly used in Cal Spas models, including:
Escape Series
Platinum Series
Balboa PZ-516L & PPZ-524L
Kona PZ-519L & PPZ-533L
Hawaiian PZ-620L
Maui PZ-620B
Check here and our online catalogue or call us to verify fitment for your specific spa model.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is specifically designed for Cal Spas utilizing the Advantage 2000+ UV system. If you are unsure about compatibility, check your part number if known or send us pictures, the make and model of the hot tub, and the serial number.
What is the best way to contact you for hard-to-find parts?
For hard to find product part assistance, send us an email to fixmytub@gmail.com. Our experts will help you identify the exact replacement part you need to get your spa running smoothly again.
Can I get help over the phone?
Yes! Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool by dialing 1-855-248-0777.
Why do I need to replace my quartz sleeve?
Mineral buildup and scaling can cause the quartz sleeve to cloud over time, which blocks the UV-C light from properly sanitizing your hot tub water. Replacing it ensures your system functions correctly and keeps your water safe.
Maintain a safe and enjoyable spa environment
Get the right parts for your Cal Spa today. Shop and order at Western tub and pool.
[Find your replacement parts]")
![Clear Water with the Cal Spa Quartz Thimble
Maintain your hot tub's UV system efficiency with the exact Cal Spas UV Light PP-I System Quartz Thimble (24.5x350) replacement part you need for safe, crystal clear water.
[Shop and order at Western tub and pool]
Keep Your Spa Water Pristine
Your hot tub should be a place of relaxation, not a maintenance headache. The UV Light PP-I System Quartz Thimble is an essential component for effective water sterilization, ensuring your spa remains inviting and safe to use.
Maximized UV Light Exposure
Measuring 24.5x350, this thimble provides expansive coverage for your UV lamp. This maximizes light exposure to the water, destroying contaminants and supporting a perfectly clear soaking experience.
Durable Design for Long-Term Use
Crafted for longevity, this quartz thimble protects your UV bulb from water damage while withstanding the harsh environment of your spa's plumbing. Regular replacement ensures optimal clarity and performance, supporting your overall system's efficiency.
Exact Fit for Cal Spas
Skip the guesswork of universal parts. This is a genuine replacement designed specifically to integrate seamlessly with your existing Cal Spas PP-I UV system.
Product Details & Compatibility
Specifications
Dimensions: 24.5 x 350
Weight: 1.00 lb
Part Number: LIT16000383 (ID: 75538)
Compatible Hot Tubs and Controls
This quartz thimble is widely used in many Cal Spas models equipped with the PP-I UV System, including the Escape and Platinum series. Compatible controls include standard Cal Spas UV system configurations. Please check here and our online catalogue or call us to verify your specific model.
Need Help Finding the Right Part?
Struggling to track down the exact component for your repair? Hard to find product part assistance is our specialty.
Check your part number if known. If you are still unsure, simply send us pictures, the make and model of the hot tub, and your serial number. Send us an email to fixmytub@gmail.com or call us at 1-855-248-0777 for expert assistance with these replacement hot tub repair parts, products, and other spa parts.
Frequently Asked Questions
Why do I need to replace my quartz thimble?
Over time, quartz thimbles can develop scaling, cloudiness, or mineral buildup that blocks UV light from properly sanitizing your water. Replacing the thimble ensures maximum light transmittance for effective water treatment.
How do I know if this thimble fits my hot tub?
This specific thimble (LIT16000383) is designed for Cal Spas models using the PP-I System. If you are unsure of your system type, contact our support team with your spa's make, model, and serial number, and we will confirm compatibility.
Where can I buy this replacement part?
You can shop and order at Western tub and pool directly through our online catalog, or place an order over the phone by calling our parts specialists.
Restore Your Hot Tub Today
Don't let cloudy water ruin your relaxation. Get the exact replacement parts you need delivered right to your door.
[Shop and order at Western tub and pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4376/6619/UV_lite__71865.1779727762.PNG?c=2 "Clear Water with the Cal Spa Quartz Thimble
Maintain your hot tub's UV system efficiency with the exact Cal Spas UV Light PP-I System Quartz Thimble (24.5x350) replacement part you need for safe, crystal clear water.
[Shop and order at Western tub and pool]
Keep Your Spa Water Pristine
Your hot tub should be a place of relaxation, not a maintenance headache. The UV Light PP-I System Quartz Thimble is an essential component for effective water sterilization, ensuring your spa remains inviting and safe to use.
Maximized UV Light Exposure
Measuring 24.5x350, this thimble provides expansive coverage for your UV lamp. This maximizes light exposure to the water, destroying contaminants and supporting a perfectly clear soaking experience.
Durable Design for Long-Term Use
Crafted for longevity, this quartz thimble protects your UV bulb from water damage while withstanding the harsh environment of your spa's plumbing. Regular replacement ensures optimal clarity and performance, supporting your overall system's efficiency.
Exact Fit for Cal Spas
Skip the guesswork of universal parts. This is a genuine replacement designed specifically to integrate seamlessly with your existing Cal Spas PP-I UV system.
Product Details & Compatibility
Specifications
Dimensions: 24.5 x 350
Weight: 1.00 lb
Part Number: LIT16000383 (ID: 75538)
Compatible Hot Tubs and Controls
This quartz thimble is widely used in many Cal Spas models equipped with the PP-I UV System, including the Escape and Platinum series. Compatible controls include standard Cal Spas UV system configurations. Please check here and our online catalogue or call us to verify your specific model.
Need Help Finding the Right Part?
Struggling to track down the exact component for your repair? Hard to find product part assistance is our specialty.
Check your part number if known. If you are still unsure, simply send us pictures, the make and model of the hot tub, and your serial number. Send us an email to fixmytub@gmail.com or call us at 1-855-248-0777 for expert assistance with these replacement hot tub repair parts, products, and other spa parts.
Frequently Asked Questions
Why do I need to replace my quartz thimble?
Over time, quartz thimbles can develop scaling, cloudiness, or mineral buildup that blocks UV light from properly sanitizing your water. Replacing the thimble ensures maximum light transmittance for effective water treatment.
How do I know if this thimble fits my hot tub?
This specific thimble (LIT16000383) is designed for Cal Spas models using the PP-I System. If you are unsure of your system type, contact our support team with your spa's make, model, and serial number, and we will confirm compatibility.
Where can I buy this replacement part?
You can shop and order at Western tub and pool directly through our online catalog, or place an order over the phone by calling our parts specialists.
Restore Your Hot Tub Today
Don't let cloudy water ruin your relaxation. Get the exact replacement parts you need delivered right to your door.
[Shop and order at Western tub and pool]")
![Balboa Wavetec254 UV Sanitation System — Clean Water, Fewer Chemicals
Tired of battling cloudy water, skin irritation, and the harsh smell of over-chemicalized spa water? The Balboa Wavetec254 UV Sanitation System destroys 99% of harmful viruses, bacteria, and pathogens — without adding a single chemical to your water.
Shop and order at Western Tub and Pool. Call us at 1-855-248-0777 or email fixmytub@gmail.com
[Shop Now] [Call Us Today]
Why the Balboa Wavetec254 Belongs in Your Hot Tub
The Wavetec254 uses proven UV-C light technology to neutralize harmful microorganisms at the DNA level — including E. coli, Cryptosporidium, and many others — before they ever reach your skin. No harsh gases. No chemical byproducts. Just clean, safe, comfortable water every time you soak.
Destroys 99% of Bacteria, Viruses & Pathogens
UV-C light deactivates the DNA of harmful microorganisms on contact, delivering hospital-grade sanitation without the chemical load that irritates your eyes and skin.
Reduce Your Chemical Usage
By handling the heavy lifting of sanitation, the Wavetec254 significantly reduces the amount of chlorine or bromine your spa requires — saving you money on chemicals and protecting your equipment from corrosion.
Won't Damage Your Spa Equipment
Unlike ozone and salt systems, UV light sanitation does not degrade seals, pumps, heaters, or other spa components. Your investment is protected.
Built for the Hot Tub Environment
Constructed with 316L stainless steel and a special heat-treated housing, this unit is engineered specifically to withstand the heat, humidity, and pressure of a working hot tub. No melting. No degrading.
Low Power, Long Life
At just 7 watts and with a UV lamp rated for a standard 12,000 hours of service, the Wavetec254 is one of the most energy-efficient sanitation systems on the market. The UL-listed electronic ballast keeps power consumption minimal.
Compact and Easy to Mount
The built-in mounting bracket means no extra stands or clamps are needed. The small footprint fits easily within the spa cabinet underskirt, making installation straightforward for qualified technicians.
Product Specifications
Specification
Model 59060 (120V)
Model 59061 (230V)
Part Number
59060 / 34-59060-01
59061-01
System Voltage
120V
230V / 240V
Lamp Wattage
7W
7W
Rated Amperage
0.33A
0.2A
System Frequency
50/60 Hz
50/60 Hz
Flow Rate
6 GPM (max)
6 GPM (max)
Max Inlet Pressure
20 PSI
20 PSI
Connection Size
3/4" Barb
3/4" Barb
Unit Length
9-3/8"
9-3/8"
Housing Material
316L Stainless Steel
316L Stainless Steel
Lamp Life
12,000 hours (standard)
12,000 hours (standard)
Approvals
UL / CUL / TUV
UL / CUL / TUV
Application
Spas / Hot Tubs
Spas / Hot Tubs
Includes
AMP Cord, Built-in Mounting Bracket
AMP Cord, Built-in Mounting Bracket
Installation Note: The unit connects to the dedicated UV/Ozone mating connector on the spa controller's circuit board. A splitter (PN: 22934 — not included) may be required if a separate ozone system is also in use.
Compatible Controls & Hot Tub Models
The Balboa Wavetec254 is designed to connect directly to Balboa Water Group control systems via the dedicated UV/Ozone port. Compatible systems include a wide range of Balboa-controlled spa packs.
Not sure if it fits your spa? Our team at Western Tub and Pool can help you confirm compatibility before you order.
Check our online catalogue, or call or email us directly:
Phone: 1-855-248-0777
Email: fixmytub@gmail.com
Balboa control systems are found in hot tubs and spas manufactured by many leading brands, including:
Cal Spas
Bullfrog Spas
Artesian Spas
PDC Spas
Sundance Spas (select models)
Dynasty Spas
ThermoSpas
Strong Spas
Master Spas (select models)
Many private-label and custom spa brands
Not on this list? A large number of mid-range and custom spa brands use Balboa control packs. If your spa has a Balboa controller, it very likely supports the Wavetec254. Send us your make, model, and serial number and we'll confirm fit for you.
Maintenance at a Glance
Keeping your Wavetec254 running at peak performance is simple:
Every 6 months: Clean the quartz tube using a dry cloth or household lime remover. Rinse thoroughly before reinstalling.
Every 12 months: Replace the UV-C lamp (PN available through your spa manufacturer's certified dealer).
Status indicators: A solid green light on the ballast confirms the unit is receiving power. A solid red light confirms the UV-C lamp is actively running.
Important: UV-C lamp replacement and quartz tube maintenance should only be performed with the spa breaker turned to the OFF position. Never look directly at an operating UV-C lamp — UV-C radiation can cause serious eye and skin damage.
Frequently Asked Questions
What is the difference between model 59060 and 59061?
The only difference is voltage. The 59060 operates at 120V and is intended for North American spas wired at 120V. The 59061 operates at 230V/240V for spas on a higher-voltage circuit. Both deliver identical sanitation performance, flow ratings, and lamp life.
How does UV-C sanitation compare to ozone or salt systems?
UV-C light neutralizes pathogens on contact without generating any chemical byproducts. Unlike ozone, it does not produce gases that can damage gaskets, seals, or other spa components. Unlike salt systems, it does not corrode metal parts or increase total dissolved solids in your water.
How often does the UV lamp need to be replaced?
The UV-C lamp has a standard service life of 12,000 hours. Under typical hot tub usage, plan to replace the lamp once per year. Only use replacement lamps recommended by your spa manufacturer and supplied through an authorized distributor.
Can I install the Wavetec254 myself?
This unit is designed to be installed by spa manufacturers or qualified service technicians. It must be mounted completely underskirt of the spa, secured to the frame structure, and connected to the spa controller's dedicated UV/Ozone port. If you need help with installation or aren't sure whether your spa is compatible, contact Western Tub and Pool before purchasing.
What if I can't find my part number?
No problem. Send us a photo of the existing unit (if you have one), along with your hot tub's make, model, and serial number, to fixmytub@gmail.com. Our team will identify the correct part and confirm it's right for your spa before you order.
Is the Wavetec254 safe for use with existing chemicals?
Yes. The system is designed to work alongside your existing water chemistry routine. Because UV-C handles a significant portion of the sanitation load, you can typically reduce your chemical usage — but you should still maintain proper pH, alkalinity, and sanitizer levels as recommended by your spa manufacturer.
Can't Find Your Part? We Can Help.
Finding the right replacement part for your hot tub can be frustrating — especially when you're not sure of the part number or whether a component is compatible with your specific model.
At Western Tub and Pool, we specialize in hard-to-find spa parts and provide free, personalized assistance to get your hot tub back up and running as quickly as possible.
Here's how to get help:
Check your part number if you know it, and match it against the models listed above (59060 for 120V, 59061 for 230V / 59061-01).
Send us a photo of the part you need to replace, along with your spa's make, model, and serial number.
Email us at fixmytub@gmail.com — our team will confirm the correct part and walk you through your options.
We also offer free in-home tutorials on hot tub, swim spa, and pool maintenance to help you keep your water clear, safe, and properly balanced year-round.
Shop and Order at Western Tub and Pool
Whether you know exactly what you need or you're starting from scratch, our team is ready to help.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop the Balboa Wavetec254 Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4207/6249/BI59061__43273.1773526635.jpg?c=2 "Balboa Wavetec254 UV Sanitation System — Clean Water, Fewer Chemicals
Tired of battling cloudy water, skin irritation, and the harsh smell of over-chemicalized spa water? The Balboa Wavetec254 UV Sanitation System destroys 99% of harmful viruses, bacteria, and pathogens — without adding a single chemical to your water.
Shop and order at Western Tub and Pool. Call us at 1-855-248-0777 or email fixmytub@gmail.com
[Shop Now] [Call Us Today]
Why the Balboa Wavetec254 Belongs in Your Hot Tub
The Wavetec254 uses proven UV-C light technology to neutralize harmful microorganisms at the DNA level — including E. coli, Cryptosporidium, and many others — before they ever reach your skin. No harsh gases. No chemical byproducts. Just clean, safe, comfortable water every time you soak.
Destroys 99% of Bacteria, Viruses & Pathogens
UV-C light deactivates the DNA of harmful microorganisms on contact, delivering hospital-grade sanitation without the chemical load that irritates your eyes and skin.
Reduce Your Chemical Usage
By handling the heavy lifting of sanitation, the Wavetec254 significantly reduces the amount of chlorine or bromine your spa requires — saving you money on chemicals and protecting your equipment from corrosion.
Won't Damage Your Spa Equipment
Unlike ozone and salt systems, UV light sanitation does not degrade seals, pumps, heaters, or other spa components. Your investment is protected.
Built for the Hot Tub Environment
Constructed with 316L stainless steel and a special heat-treated housing, this unit is engineered specifically to withstand the heat, humidity, and pressure of a working hot tub. No melting. No degrading.
Low Power, Long Life
At just 7 watts and with a UV lamp rated for a standard 12,000 hours of service, the Wavetec254 is one of the most energy-efficient sanitation systems on the market. The UL-listed electronic ballast keeps power consumption minimal.
Compact and Easy to Mount
The built-in mounting bracket means no extra stands or clamps are needed. The small footprint fits easily within the spa cabinet underskirt, making installation straightforward for qualified technicians.
Product Specifications
Specification
Model 59060 (120V)
Model 59061 (230V)
Part Number
59060 / 34-59060-01
59061-01
System Voltage
120V
230V / 240V
Lamp Wattage
7W
7W
Rated Amperage
0.33A
0.2A
System Frequency
50/60 Hz
50/60 Hz
Flow Rate
6 GPM (max)
6 GPM (max)
Max Inlet Pressure
20 PSI
20 PSI
Connection Size
3/4\" Barb
3/4\" Barb
Unit Length
9-3/8\"
9-3/8\"
Housing Material
316L Stainless Steel
316L Stainless Steel
Lamp Life
12,000 hours (standard)
12,000 hours (standard)
Approvals
UL / CUL / TUV
UL / CUL / TUV
Application
Spas / Hot Tubs
Spas / Hot Tubs
Includes
AMP Cord, Built-in Mounting Bracket
AMP Cord, Built-in Mounting Bracket
Installation Note: The unit connects to the dedicated UV/Ozone mating connector on the spa controller's circuit board. A splitter (PN: 22934 — not included) may be required if a separate ozone system is also in use.
Compatible Controls & Hot Tub Models
The Balboa Wavetec254 is designed to connect directly to Balboa Water Group control systems via the dedicated UV/Ozone port. Compatible systems include a wide range of Balboa-controlled spa packs.
Not sure if it fits your spa? Our team at Western Tub and Pool can help you confirm compatibility before you order.
Check our online catalogue, or call or email us directly:
Phone: 1-855-248-0777
Email: fixmytub@gmail.com
Balboa control systems are found in hot tubs and spas manufactured by many leading brands, including:
Cal Spas
Bullfrog Spas
Artesian Spas
PDC Spas
Sundance Spas (select models)
Dynasty Spas
ThermoSpas
Strong Spas
Master Spas (select models)
Many private-label and custom spa brands
Not on this list? A large number of mid-range and custom spa brands use Balboa control packs. If your spa has a Balboa controller, it very likely supports the Wavetec254. Send us your make, model, and serial number and we'll confirm fit for you.
Maintenance at a Glance
Keeping your Wavetec254 running at peak performance is simple:
Every 6 months: Clean the quartz tube using a dry cloth or household lime remover. Rinse thoroughly before reinstalling.
Every 12 months: Replace the UV-C lamp (PN available through your spa manufacturer's certified dealer).
Status indicators: A solid green light on the ballast confirms the unit is receiving power. A solid red light confirms the UV-C lamp is actively running.
Important: UV-C lamp replacement and quartz tube maintenance should only be performed with the spa breaker turned to the OFF position. Never look directly at an operating UV-C lamp — UV-C radiation can cause serious eye and skin damage.
Frequently Asked Questions
What is the difference between model 59060 and 59061?
The only difference is voltage. The 59060 operates at 120V and is intended for North American spas wired at 120V. The 59061 operates at 230V/240V for spas on a higher-voltage circuit. Both deliver identical sanitation performance, flow ratings, and lamp life.
How does UV-C sanitation compare to ozone or salt systems?
UV-C light neutralizes pathogens on contact without generating any chemical byproducts. Unlike ozone, it does not produce gases that can damage gaskets, seals, or other spa components. Unlike salt systems, it does not corrode metal parts or increase total dissolved solids in your water.
How often does the UV lamp need to be replaced?
The UV-C lamp has a standard service life of 12,000 hours. Under typical hot tub usage, plan to replace the lamp once per year. Only use replacement lamps recommended by your spa manufacturer and supplied through an authorized distributor.
Can I install the Wavetec254 myself?
This unit is designed to be installed by spa manufacturers or qualified service technicians. It must be mounted completely underskirt of the spa, secured to the frame structure, and connected to the spa controller's dedicated UV/Ozone port. If you need help with installation or aren't sure whether your spa is compatible, contact Western Tub and Pool before purchasing.
What if I can't find my part number?
No problem. Send us a photo of the existing unit (if you have one), along with your hot tub's make, model, and serial number, to fixmytub@gmail.com. Our team will identify the correct part and confirm it's right for your spa before you order.
Is the Wavetec254 safe for use with existing chemicals?
Yes. The system is designed to work alongside your existing water chemistry routine. Because UV-C handles a significant portion of the sanitation load, you can typically reduce your chemical usage — but you should still maintain proper pH, alkalinity, and sanitizer levels as recommended by your spa manufacturer.
Can't Find Your Part? We Can Help.
Finding the right replacement part for your hot tub can be frustrating — especially when you're not sure of the part number or whether a component is compatible with your specific model.
At Western Tub and Pool, we specialize in hard-to-find spa parts and provide free, personalized assistance to get your hot tub back up and running as quickly as possible.
Here's how to get help:
Check your part number if you know it, and match it against the models listed above (59060 for 120V, 59061 for 230V / 59061-01).
Send us a photo of the part you need to replace, along with your spa's make, model, and serial number.
Email us at fixmytub@gmail.com — our team will confirm the correct part and walk you through your options.
We also offer free in-home tutorials on hot tub, swim spa, and pool maintenance to help you keep your water clear, safe, and properly balanced year-round.
Shop and Order at Western Tub and Pool
Whether you know exactly what you need or you're starting from scratch, our team is ready to help.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop the Balboa Wavetec254 Now]")
![Balboa Wavetec254 UV Sanitation System — Clean Water, Fewer Chemicals
Tired of battling cloudy water, skin irritation, and the harsh smell of over-chemicalized spa water? The Balboa Wavetec254 UV Sanitation System destroys 99% of harmful viruses, bacteria, and pathogens — without adding a single chemical to your water.
Shop and order at Western Tub and Pool. Call us at 1-855-248-0777 or email fixmytub@gmail.com
[Shop Now] [Call Us Today]
Why the Balboa Wavetec254 Belongs in Your Hot Tub
The Wavetec254 uses proven UV-C light technology to neutralize harmful microorganisms at the DNA level — including E. coli, Cryptosporidium, and many others — before they ever reach your skin. No harsh gases. No chemical byproducts. Just clean, safe, comfortable water every time you soak.
Destroys 99% of Bacteria, Viruses & Pathogens
UV-C light deactivates the DNA of harmful microorganisms on contact, delivering hospital-grade sanitation without the chemical load that irritates your eyes and skin.
Reduce Your Chemical Usage
By handling the heavy lifting of sanitation, the Wavetec254 significantly reduces the amount of chlorine or bromine your spa requires — saving you money on chemicals and protecting your equipment from corrosion.
Won't Damage Your Spa Equipment
Unlike ozone and salt systems, UV light sanitation does not degrade seals, pumps, heaters, or other spa components. Your investment is protected.
Built for the Hot Tub Environment
Constructed with 316L stainless steel and a special heat-treated housing, this unit is engineered specifically to withstand the heat, humidity, and pressure of a working hot tub. No melting. No degrading.
Low Power, Long Life
At just 7 watts and with a UV lamp rated for a standard 12,000 hours of service, the Wavetec254 is one of the most energy-efficient sanitation systems on the market. The UL-listed electronic ballast keeps power consumption minimal.
Compact and Easy to Mount
The built-in mounting bracket means no extra stands or clamps are needed. The small footprint fits easily within the spa cabinet underskirt, making installation straightforward for qualified technicians.
Product Specifications
Specification
Model 59060 (120V)
Model 59061 (230V)
Part Number
59060 / 34-59060-01
59061-01
System Voltage
120V
230V / 240V
Lamp Wattage
7W
7W
Rated Amperage
0.33A
0.2A
System Frequency
50/60 Hz
50/60 Hz
Flow Rate
6 GPM (max)
6 GPM (max)
Max Inlet Pressure
20 PSI
20 PSI
Connection Size
3/4" Barb
3/4" Barb
Unit Length
9-3/8"
9-3/8"
Housing Material
316L Stainless Steel
316L Stainless Steel
Lamp Life
12,000 hours (standard)
12,000 hours (standard)
Approvals
UL / CUL / TUV
UL / CUL / TUV
Application
Spas / Hot Tubs
Spas / Hot Tubs
Includes
AMP Cord, Built-in Mounting Bracket
AMP Cord, Built-in Mounting Bracket
Installation Note: The unit connects to the dedicated UV/Ozone mating connector on the spa controller's circuit board. A splitter (PN: 22934 — not included) may be required if a separate ozone system is also in use.
Compatible Controls & Hot Tub Models
The Balboa Wavetec254 is designed to connect directly to Balboa Water Group control systems via the dedicated UV/Ozone port. Compatible systems include a wide range of Balboa-controlled spa packs.
Not sure if it fits your spa? Our team at Western Tub and Pool can help you confirm compatibility before you order.
Check our online catalogue, or call or email us directly:
Phone: 1-855-248-0777
Email: fixmytub@gmail.com
Balboa control systems are found in hot tubs and spas manufactured by many leading brands, including:
Cal Spas
Bullfrog Spas
Artesian Spas
PDC Spas
Sundance Spas (select models)
Dynasty Spas
ThermoSpas
Strong Spas
Master Spas (select models)
Many private-label and custom spa brands
Not on this list? A large number of mid-range and custom spa brands use Balboa control packs. If your spa has a Balboa controller, it very likely supports the Wavetec254. Send us your make, model, and serial number and we'll confirm fit for you.
Maintenance at a Glance
Keeping your Wavetec254 running at peak performance is simple:
Every 6 months: Clean the quartz tube using a dry cloth or household lime remover. Rinse thoroughly before reinstalling.
Every 12 months: Replace the UV-C lamp (PN available through your spa manufacturer's certified dealer).
Status indicators: A solid green light on the ballast confirms the unit is receiving power. A solid red light confirms the UV-C lamp is actively running.
Important: UV-C lamp replacement and quartz tube maintenance should only be performed with the spa breaker turned to the OFF position. Never look directly at an operating UV-C lamp — UV-C radiation can cause serious eye and skin damage.
Frequently Asked Questions
What is the difference between model 59060 and 59061?
The only difference is voltage. The 59060 operates at 120V and is intended for North American spas wired at 120V. The 59061 operates at 230V/240V for spas on a higher-voltage circuit. Both deliver identical sanitation performance, flow ratings, and lamp life.
How does UV-C sanitation compare to ozone or salt systems?
UV-C light neutralizes pathogens on contact without generating any chemical byproducts. Unlike ozone, it does not produce gases that can damage gaskets, seals, or other spa components. Unlike salt systems, it does not corrode metal parts or increase total dissolved solids in your water.
How often does the UV lamp need to be replaced?
The UV-C lamp has a standard service life of 12,000 hours. Under typical hot tub usage, plan to replace the lamp once per year. Only use replacement lamps recommended by your spa manufacturer and supplied through an authorized distributor.
Can I install the Wavetec254 myself?
This unit is designed to be installed by spa manufacturers or qualified service technicians. It must be mounted completely underskirt of the spa, secured to the frame structure, and connected to the spa controller's dedicated UV/Ozone port. If you need help with installation or aren't sure whether your spa is compatible, contact Western Tub and Pool before purchasing.
What if I can't find my part number?
No problem. Send us a photo of the existing unit (if you have one), along with your hot tub's make, model, and serial number, to fixmytub@gmail.com. Our team will identify the correct part and confirm it's right for your spa before you order.
Is the Wavetec254 safe for use with existing chemicals?
Yes. The system is designed to work alongside your existing water chemistry routine. Because UV-C handles a significant portion of the sanitation load, you can typically reduce your chemical usage — but you should still maintain proper pH, alkalinity, and sanitizer levels as recommended by your spa manufacturer.
Can't Find Your Part? We Can Help.
Finding the right replacement part for your hot tub can be frustrating — especially when you're not sure of the part number or whether a component is compatible with your specific model.
At Western Tub and Pool, we specialize in hard-to-find spa parts and provide free, personalized assistance to get your hot tub back up and running as quickly as possible.
Here's how to get help:
Check your part number if you know it, and match it against the models listed above (59060 for 120V, 59061 for 230V / 59061-01).
Send us a photo of the part you need to replace, along with your spa's make, model, and serial number.
Email us at fixmytub@gmail.com — our team will confirm the correct part and walk you through your options.
We also offer free in-home tutorials on hot tub, swim spa, and pool maintenance to help you keep your water clear, safe, and properly balanced year-round.
Shop and Order at Western Tub and Pool
Whether you know exactly what you need or you're starting from scratch, our team is ready to help.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop the Balboa Wavetec254 Now]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4207/6250/SPA_BI59061-01-600x600__71342.1773526654.jpg?c=2 "Balboa Wavetec254 UV Sanitation System — Clean Water, Fewer Chemicals
Tired of battling cloudy water, skin irritation, and the harsh smell of over-chemicalized spa water? The Balboa Wavetec254 UV Sanitation System destroys 99% of harmful viruses, bacteria, and pathogens — without adding a single chemical to your water.
Shop and order at Western Tub and Pool. Call us at 1-855-248-0777 or email fixmytub@gmail.com
[Shop Now] [Call Us Today]
Why the Balboa Wavetec254 Belongs in Your Hot Tub
The Wavetec254 uses proven UV-C light technology to neutralize harmful microorganisms at the DNA level — including E. coli, Cryptosporidium, and many others — before they ever reach your skin. No harsh gases. No chemical byproducts. Just clean, safe, comfortable water every time you soak.
Destroys 99% of Bacteria, Viruses & Pathogens
UV-C light deactivates the DNA of harmful microorganisms on contact, delivering hospital-grade sanitation without the chemical load that irritates your eyes and skin.
Reduce Your Chemical Usage
By handling the heavy lifting of sanitation, the Wavetec254 significantly reduces the amount of chlorine or bromine your spa requires — saving you money on chemicals and protecting your equipment from corrosion.
Won't Damage Your Spa Equipment
Unlike ozone and salt systems, UV light sanitation does not degrade seals, pumps, heaters, or other spa components. Your investment is protected.
Built for the Hot Tub Environment
Constructed with 316L stainless steel and a special heat-treated housing, this unit is engineered specifically to withstand the heat, humidity, and pressure of a working hot tub. No melting. No degrading.
Low Power, Long Life
At just 7 watts and with a UV lamp rated for a standard 12,000 hours of service, the Wavetec254 is one of the most energy-efficient sanitation systems on the market. The UL-listed electronic ballast keeps power consumption minimal.
Compact and Easy to Mount
The built-in mounting bracket means no extra stands or clamps are needed. The small footprint fits easily within the spa cabinet underskirt, making installation straightforward for qualified technicians.
Product Specifications
Specification
Model 59060 (120V)
Model 59061 (230V)
Part Number
59060 / 34-59060-01
59061-01
System Voltage
120V
230V / 240V
Lamp Wattage
7W
7W
Rated Amperage
0.33A
0.2A
System Frequency
50/60 Hz
50/60 Hz
Flow Rate
6 GPM (max)
6 GPM (max)
Max Inlet Pressure
20 PSI
20 PSI
Connection Size
3/4\" Barb
3/4\" Barb
Unit Length
9-3/8\"
9-3/8\"
Housing Material
316L Stainless Steel
316L Stainless Steel
Lamp Life
12,000 hours (standard)
12,000 hours (standard)
Approvals
UL / CUL / TUV
UL / CUL / TUV
Application
Spas / Hot Tubs
Spas / Hot Tubs
Includes
AMP Cord, Built-in Mounting Bracket
AMP Cord, Built-in Mounting Bracket
Installation Note: The unit connects to the dedicated UV/Ozone mating connector on the spa controller's circuit board. A splitter (PN: 22934 — not included) may be required if a separate ozone system is also in use.
Compatible Controls & Hot Tub Models
The Balboa Wavetec254 is designed to connect directly to Balboa Water Group control systems via the dedicated UV/Ozone port. Compatible systems include a wide range of Balboa-controlled spa packs.
Not sure if it fits your spa? Our team at Western Tub and Pool can help you confirm compatibility before you order.
Check our online catalogue, or call or email us directly:
Phone: 1-855-248-0777
Email: fixmytub@gmail.com
Balboa control systems are found in hot tubs and spas manufactured by many leading brands, including:
Cal Spas
Bullfrog Spas
Artesian Spas
PDC Spas
Sundance Spas (select models)
Dynasty Spas
ThermoSpas
Strong Spas
Master Spas (select models)
Many private-label and custom spa brands
Not on this list? A large number of mid-range and custom spa brands use Balboa control packs. If your spa has a Balboa controller, it very likely supports the Wavetec254. Send us your make, model, and serial number and we'll confirm fit for you.
Maintenance at a Glance
Keeping your Wavetec254 running at peak performance is simple:
Every 6 months: Clean the quartz tube using a dry cloth or household lime remover. Rinse thoroughly before reinstalling.
Every 12 months: Replace the UV-C lamp (PN available through your spa manufacturer's certified dealer).
Status indicators: A solid green light on the ballast confirms the unit is receiving power. A solid red light confirms the UV-C lamp is actively running.
Important: UV-C lamp replacement and quartz tube maintenance should only be performed with the spa breaker turned to the OFF position. Never look directly at an operating UV-C lamp — UV-C radiation can cause serious eye and skin damage.
Frequently Asked Questions
What is the difference between model 59060 and 59061?
The only difference is voltage. The 59060 operates at 120V and is intended for North American spas wired at 120V. The 59061 operates at 230V/240V for spas on a higher-voltage circuit. Both deliver identical sanitation performance, flow ratings, and lamp life.
How does UV-C sanitation compare to ozone or salt systems?
UV-C light neutralizes pathogens on contact without generating any chemical byproducts. Unlike ozone, it does not produce gases that can damage gaskets, seals, or other spa components. Unlike salt systems, it does not corrode metal parts or increase total dissolved solids in your water.
How often does the UV lamp need to be replaced?
The UV-C lamp has a standard service life of 12,000 hours. Under typical hot tub usage, plan to replace the lamp once per year. Only use replacement lamps recommended by your spa manufacturer and supplied through an authorized distributor.
Can I install the Wavetec254 myself?
This unit is designed to be installed by spa manufacturers or qualified service technicians. It must be mounted completely underskirt of the spa, secured to the frame structure, and connected to the spa controller's dedicated UV/Ozone port. If you need help with installation or aren't sure whether your spa is compatible, contact Western Tub and Pool before purchasing.
What if I can't find my part number?
No problem. Send us a photo of the existing unit (if you have one), along with your hot tub's make, model, and serial number, to fixmytub@gmail.com. Our team will identify the correct part and confirm it's right for your spa before you order.
Is the Wavetec254 safe for use with existing chemicals?
Yes. The system is designed to work alongside your existing water chemistry routine. Because UV-C handles a significant portion of the sanitation load, you can typically reduce your chemical usage — but you should still maintain proper pH, alkalinity, and sanitizer levels as recommended by your spa manufacturer.
Can't Find Your Part? We Can Help.
Finding the right replacement part for your hot tub can be frustrating — especially when you're not sure of the part number or whether a component is compatible with your specific model.
At Western Tub and Pool, we specialize in hard-to-find spa parts and provide free, personalized assistance to get your hot tub back up and running as quickly as possible.
Here's how to get help:
Check your part number if you know it, and match it against the models listed above (59060 for 120V, 59061 for 230V / 59061-01).
Send us a photo of the part you need to replace, along with your spa's make, model, and serial number.
Email us at fixmytub@gmail.com — our team will confirm the correct part and walk you through your options.
We also offer free in-home tutorials on hot tub, swim spa, and pool maintenance to help you keep your water clear, safe, and properly balanced year-round.
Shop and Order at Western Tub and Pool
Whether you know exactly what you need or you're starting from scratch, our team is ready to help.
Call us: 1-855-248-0777
Email us: fixmytub@gmail.com
[Shop the Balboa Wavetec254 Now]")
![Keep Your Cal Spa Water Crystal Clear
The 25-Watt Quartz Sleeve protects your UV sanitizing system so you can enjoy safe, clean hot tub water without the hassle. Find the exact replacement part for your Cal Spa and get back to relaxing.
[Shop and order at Western tub and pool]
The perfect fit for your spa
Maintaining your hot tub's water quality is essential for a safe and relaxing soak. The 25-Watt Quartz Sleeve (Part Number: LIT16100260) is designed specifically for Cal Spas, ensuring your UV sanitizing system operates at peak performance.
Protect your UV system
This durable quartz sleeve acts as a vital barrier, protecting your UV bulb from water damage while allowing maximum UV light transmission to keep your water crystal clear.
Exact OEM compatibility
Don't guess with generic parts. This sleeve is the exact replacement for Cal Spas models, ensuring a seamless installation and reliable, long-lasting performance.
Fast and easy maintenance
Replacing your quartz sleeve is a straightforward process that instantly revitalizes your spa's sanitization capabilities, saving you time and money on costly professional repairs.
Specifications and compatibility
When you shop and order at Western tub and pool, you get access to top-quality replacement parts. Check here and our online catalogue or call us to verify your fit.
Product Specifications:
Part Number: LIT16100260
System Type: 25-Watt UV Light Sanitizing System
Material: High-grade, clear quartz
Compatible Cal Spa Models:
This 25-Watt Quartz Sleeve is used in many popular Cal Spas models and series, including:
Cal Spas Portable Spas (2010-2012+ models)
Escape Series
Platinum Series
Victory Series
Gen II Spas
Patio Spas
Compatible controls include standard Cal Spas UV Advantage 2000+ and PP-1 Systems.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is designed for Cal Spas utilizing a 25-Watt UV sanitizing system (OEM part number LIT16100260). We recommend checking your owner's manual or the existing UV system housing to confirm the part number before purchasing.
What if I cannot find my specific part number?
We specialize in hard to find product part assistance! Send us an email at fixmytub@gmail.com. Check your part number if known, or simply send us pictures, the make and model of the hot tub, and the serial number. Our experts will identify exactly what you need.
How can I get more information or assistance?
Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool at 1-855-248-0777, or email us at fixmytub@gmail.com.
Get your replacement parts today
Keep your hot tub running smoothly and safely. Shop and order at Western tub and pool to get the right parts delivered straight to your door.
[Shop and order at Western tub and pool]](https://cdn11.bigcommerce.com/s-b7yzllubsu/images/stencil/500x659/products/4378/6621/uvlite3__08189.1779729616.PNG?c=2 "Keep Your Cal Spa Water Crystal Clear
The 25-Watt Quartz Sleeve protects your UV sanitizing system so you can enjoy safe, clean hot tub water without the hassle. Find the exact replacement part for your Cal Spa and get back to relaxing.
[Shop and order at Western tub and pool]
The perfect fit for your spa
Maintaining your hot tub's water quality is essential for a safe and relaxing soak. The 25-Watt Quartz Sleeve (Part Number: LIT16100260) is designed specifically for Cal Spas, ensuring your UV sanitizing system operates at peak performance.
Protect your UV system
This durable quartz sleeve acts as a vital barrier, protecting your UV bulb from water damage while allowing maximum UV light transmission to keep your water crystal clear.
Exact OEM compatibility
Don't guess with generic parts. This sleeve is the exact replacement for Cal Spas models, ensuring a seamless installation and reliable, long-lasting performance.
Fast and easy maintenance
Replacing your quartz sleeve is a straightforward process that instantly revitalizes your spa's sanitization capabilities, saving you time and money on costly professional repairs.
Specifications and compatibility
When you shop and order at Western tub and pool, you get access to top-quality replacement parts. Check here and our online catalogue or call us to verify your fit.
Product Specifications:
Part Number: LIT16100260
System Type: 25-Watt UV Light Sanitizing System
Material: High-grade, clear quartz
Compatible Cal Spa Models:
This 25-Watt Quartz Sleeve is used in many popular Cal Spas models and series, including:
Cal Spas Portable Spas (2010-2012+ models)
Escape Series
Platinum Series
Victory Series
Gen II Spas
Patio Spas
Compatible controls include standard Cal Spas UV Advantage 2000+ and PP-1 Systems.
Frequently asked questions
How do I know if this quartz sleeve fits my hot tub?
This sleeve is designed for Cal Spas utilizing a 25-Watt UV sanitizing system (OEM part number LIT16100260). We recommend checking your owner's manual or the existing UV system housing to confirm the part number before purchasing.
What if I cannot find my specific part number?
We specialize in hard to find product part assistance! Send us an email at fixmytub@gmail.com. Check your part number if known, or simply send us pictures, the make and model of the hot tub, and the serial number. Our experts will identify exactly what you need.
How can I get more information or assistance?
Call us for more information or assistance with these replacement hot tub repair parts, products, and other spa parts at Western Tub and pool at 1-855-248-0777, or email us at fixmytub@gmail.com.
Get your replacement parts today
Keep your hot tub running smoothly and safely. Shop and order at Western tub and pool to get the right parts delivered straight to your door.
[Shop and order at Western tub and pool]")
